Automotive Ignition & Electrical Supplies at Summit Racing

On Sale

MSD Pro 600 CDI Ignition and High-Output Coil Kits

When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class

Not Yet Reviewed

$2,561.95

$2,304.95

On Sale

MSD Pro 600 CDI Ignition Boxes

MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class

Not Yet Reviewed

$1,229.95

—

$2,049.95

$1,105.95

—

$1,843.95

MSD Pro 600 CDI Ignition Coil Harnesses

MSD Pro 600 CDI ignition coil harnesses offer the same length, quality wire, and connectors as the originals for an exact match and reliable, continued performance. If you have damaged the main harness or are simply rewiring a car, MSD Pro 600 coil harnesses are direct replacements.

Not Yet Reviewed

$101.95

On Sale

MSD Pro 600 CDI Ignition High-Output Coils

MSD Pro 600 CDI ignition high-output coils developed these powerful coils to provide unrivaled spark energy and dependability. The best choice to equip your Pro 600 CDI, they have the highest current and voltage available in a small compact design, creating over 200 millijoules of spark energy and leaving no horsepower untapped. Along with the unrivaled output of your Pro 600 CDI, MSD high-output coils, everything from Pro-mod's to pulling trucks can perform at a whole new level! Features and benefits: * Designed for extreme racing for the Pro 600 Capacitive Discharge Ignition * Capable of up to 50,000 V to ignite extreme cylinder pressures * Over 200 millijoules of spark energy makes them ideal for use with methanol, ethanol, and E85, as well as forced induction and power adder combinations * Supplied with hardware to mount horizontal or vertical position * Coils are designed to be mounted on Holley's LS valve covers, or OE LS passenger car coil brackets using 72mm bolt spacing * HEI-style secondary tower for secure coil wire connection

Not Yet Reviewed

$101.95

—

$921.95

$78.46

—

$828.95

Clearance

Mele Design 600 Series Rally Spec Battery Mounts

Mele Design 600 Series Rally Spec battery mounts are cut in-house from 5052 marine-grade aluminum, then hand-formed, hand-finished, and TIG-welded. Each mount comes with a proprietary coated steel rally plate. The mounts are finished in a textured black powdercoat, and include either lock nuts or rivet nuts for installation, where applicable. Additional notes: * Drilling is required * Welding is optional * Designed to fit Odyssey PC680, XSPower D680, Full Throttle FT230 and Braille G20 battery models * Able to place mount anywhere there is a flat metal surface using our comprehensive coated steel rally plate (including the trunk) * Shed and or shift vital weight in the vehicle * Track tested (these mounts are currently being used by numerous teams in the American Rally Association)

Not Yet Reviewed

$250.00

$179.50

MSD Pro 600 Replacement Wiring Harnesses

MSD carries replacement wiring harnesses for Pro 600 applications. If you damage a harness or are simply rewiring a car, MSD offers the exact harnesses that come from the factory with the Pro 600 CDI. The harnesses are made with the same quality wire and connectors as the originals and are the same length for an exact match. They're available for the Pro 600 ignition box to connect to EFI or LS engines—or to connect to an MSD power grid. Order the model needed for your purpose.

Not Yet Reviewed

$101.95

—

$134.95

Clearance

Mele Design 600 Series Battery Mounts

Mele Design 600 Series battery mounts are CNC cut in-house from 5052 marine-grade aluminum, then hand-formed, hand-finished, and TIG-welded. Each mount comes with stainless steel mounting hardware. The mounts are available in a natural or black powdercoat finish. Order the model recommended for your vehicle. Additional details: * Direct-fit, no drilling required * Designed to fit Odyssey PC680, XS Power D680, Full Throttle FT230, and Braille G20 battery models * Sheds vital weight from the nose of the vehicle * Creates usable space to custom mount various items * Cleans up engine bay * Track tested (Mele is currently being used in various forms of racing)

Not Yet Reviewed

$155.00

$109.50

—

$155.00

Odyssey Performance Series Batteries

Odyssey Performance Series batteries are designed to handle the increased use of on board accessories in today's vehicles. They combine long service life, high reliability, and deep cycle capabilities. Performance batteries provide all the reliability of the Odyssey Extreme Series batteries, without the high cold cranking amps or reserve capacity many people may not require. The Performance Series batteries contain flat plates made of 99.99 percent pure lead--not lead alloy, like many conventional batteries.

4.97 out of 5 stars ( 72 )

$319.00

—

$363.99

Powermaster Diode Wiring Harnesses

Powermaster diode assemblies are what you need to finish the job. These diode wiring harnesses are for use with an original points ignition or with systems that utilize a ballast resistor. They come with preterminated wire connectors for straight forward installation and are shrink-wrapped for maximum protection.

4.68 out of 5 stars ( 28 )

$28.99

On Sale

Mallory Pro Wire Spark Plug Wire Sets

Mallory's Pro Wire spark plug wire sets are designed to meet the demands of every performance driving application. These wires feature a high-tech, carbon-impregnated fiber core to deliver energy while suppressing interference for on-board electronics. An 8mm silicone jacket repels water, oil, grease, and fuel, while withstanding temperatures of up to 500 degrees F.

4.78 out of 5 stars ( 9 )

$101.95

$68.26

Dorman 4WD Differential Actuator Wiring Harnesses

Improve the function of your vehicle with Dorman 4WD differential actuator wiring harnesses. They are designed to upgrade your older 4WD truck for use with newer on-demand actuator technology. These direct replacements are durable and include all necessary connectors for superb fit and function. If you're replacing your thermal-style axle actuator with an electronic one, Dorman 4WD differential actuator wiring harnesses will facilitate the overall improved performance of your vehicle.

3.17 out of 5 stars ( 6 )

$63.99

Quick Fuel Nitrous Activation Switches

Quick Fuel nitrous switches allow flawless full-throttle activation of your nitrous system, and take only five minutes to install. These microswitches and bracket assemblies easily bolt to the side of your carburetor and activate your nitrous system according to throttle position for more consistent runs.

4.67 out of 5 stars ( 6 )

$58.69

—

$61.45

On Sale

FuelTech FT600 EFI System

FuelTech's FT600 EFI systems are the perfect association between the ECU and the dashboard—which makes them the world's most complete solution, presenting both features combined! Developed on the PowerFT platform, already praised for FuelTech's FT500 version, the FT600 EFI Systems offer new features, such as: the new Superseal automotive connectors that add up to 68 pins (20 sensor inputs and 32 outputs), accelerometer and gyroscope, two CAN networks, and a built-in GearController. The last feature enables the direct connection with the strain gauge sensor on the shifter, bringing new possibilities for more efficient engine gearshift cuts. In addition, FT600 EFI systems also present a pack of beloved racing functions used all over the world that cover time-based launch features, boost control, staging control, Pro-Nitrous control, advanced internal datalogger—just to name a few! More features and benefits: * Extreme high-quality aluminum housing, which is also waterproof to IP67 standards * Anti-glare TFT touch screen display and a redesigned dashboard exclusively developed to grant the driver an easier viewing experience * Touch screen display makes it possible to make map adjustments directly on the ECU, without the use of a laptop * Able to manage sequential injection and ignition on engines from 1 up to 12 cylinders (or up to 4 rotors); and comes with an option for simplified maps, which allows making initial adjustments easier or 3-D maps for more advanced applications * New ECU presents individual cylinder injection and ignition trim; plus exclusive features that help on the first engine start; and also contains an advanced and efficient closed loop fuel control for engine safety * Design includes an upper visor that reduces glare and houses 10 LED lights that are color and intensity adjustable, suitable for a progressive shift light * 4 additional LED lights on the side of the ECU that are adjustable for diagnosing, alerts, and current status of any sensor * Uses FTManager software, with all resources and existing functions as the FT550 * Compatible with all existing features and FT500 maps to allow you to open, edit and save maps through an interactive interface that is easy to use

Not Yet Reviewed

$2,999.00

$2,399.00

Dorman Power Window Switches

Dorman power window switches are high-quality replacements to facilitate the ups-and-downs of window operation. They're designed to meet all OEM specifications and install in the stock location. Dozens of styles are available for fitment in specific vehicles.

4.29 out of 5 stars ( 77 )

$117.95

Eddie Marine Remote Battery Jumper Boxes

Eddie Marine remote battery jumper boxes mount in out-of-the-way places to provide access for jumper cables or battery chargers. Simply, open the cover to expose two battery posts. They are available in black or white plastic, or choose their billet aluminum model that is available polished, anodized, or in Fusioncoat finishes.

1.0 out of 5 stars ( 1 )

$239.95

Standard Motor Voltage Regulators

Don't take chances with old or questionable voltage regulators that can leave you stranded. Standard Motor Products replacement voltage regulators are designed to exceed OEM specifications for accurate, maintenance-free operation. Trust your vehicle's electrical system needs to Standard Motor Performance.

4.23 out of 5 stars ( 39 )

$26.99

—

$136.99

Dorman Replacement Electrical Switches

Dorman replacement electrical switches are constructed from quality materials, and each switch model is designed to fit and function like OEM. So if faulty, worn out switches are giving you a difficult time—get them fixed with one of the many replacement electrical switches that Dorman offers.

4.2 out of 5 stars ( 5 )

$20.99

—

$62.95

Dorman Wiring Connectors

Dorman wiring connectors are designed to facilitate the flow of electrical current over a broad range of applications. The small components are available in a variety of styles to fit your specific application or universal fit needs. Choose Dorman wiring connectors for a reliable connection every time.

4.47 out of 5 stars ( 58 )

$10.99

—

$17.99

Eddie Motorsports Billet Battery Jumper Boxes

Eddie Motorsports likes to come up with solutions to allow you to enjoy your hot rod more. Some of the parts that help you accomplish that are Eddie Motorsports billet aluminum jumper boxes. They mount in a remote place to provide easy access for jumper cables and battery chargers, without having to wrap your wires inside your hood or around your fenders. These battery jumper boxes are offered in a range of finishes, including bright polished, raw machined, gloss or matte black, or clear anodized.

Not Yet Reviewed

$239.95

Rick's Motorsport Stators

Rick's Motorsport stators are available for ATVs, UTVs, off-road, street bikes, and snowmobiles. These stators are built to stock specifications and provide high performance, cost-effective upgrades over the original parts. Rick's Motorsport stators that offer more output for running additional lights and accessories are also available.

Not Yet Reviewed

$99.95

—

$249.95

Racepak G2X-Pro Data Loggers

Racepak G2X-Pro data loggers are ideal for any large number of sensor input applications, as they can monitor up to 71 channels. They provide lap and segment timing, along with speed and track mapping functions via GPS. Packages for monitoring everything from brake pressure to suspension height—and anything else that can be quantifiably charted—are also available. These loggers are compatible with all Racepak sensors, allowing for full customization. The optional G2X-Pro dash display shows valuable race and lap information, including G-forces and rpm. Gain the advantage of becoming a fully-informed racer with Racepak G2X-Pro data loggers. Items and features include: * G2X-Pro data logger * GPS antenna * Accepts up to 16GB SD Memory Card for countless hours of monitoring * Datalink II software communication cable * Power/ground/engine RPM harness

Not Yet Reviewed

$1,949.95

Dorman 4WD Engagement Switches

You expect immediate response when you kick your vehicle into 4WD. It can mean the difference between becoming stranded—or plowing through adverse elements or treacherous trails. Dorman 4WD engagement switches are available in roughly a dozen styles for replacement on a variety of trucks, Jeeps, and SUVs. Order the direct OE model needed for fitment on your vehicle.

4.81 out of 5 stars ( 16 )

$17.99

Racepak Analog Pre-Programmed V-Net Modules Without Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.

Not Yet Reviewed

$229.95

Standard Motor ABS Speed Sensors

Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.

4.88 out of 5 stars ( 17 )

$55.99

—

$111.99