Ignitions & Electrical
Availability
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing...
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing with a digital ignition control, performance distributor, and low-resistance ignition wires. Outfit your race car with competition-proven automotive electronics and accessories, or rewire your resto-mod with a complete wiring harness. Reprogram your vehicle’s computer or rejuvenate your daily driver with a new distributor cap, rotor, and spark plugs. We have the best automotive ignition and electrical supplies from the biggest names in the industry, in stock...
Whatever sparks your high performance dream, you’ll find it here. Get your engine started with a high-amp battery and high-torque mini starter. Keep the power flowing with a digital ignition control, performance distributor, and low-resistance ignition wires. Outfit your race car with competition-proven automotive electronics and accessories, or rewire your resto-mod with a complete wiring harness. Reprogram your vehicle’s computer or rejuvenate your daily driver with a new distributor cap, rotor, and spark plugs. We have the best automotive ignition and electrical supplies from the biggest names in the industry, in stock and ready to ship.
Chevrolet Performance MAP sensors are high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes--and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. The MAP sensors are available to fit most GM engines, including the LS Series. They're built from factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$39.99
Whether your engine has forced induction or is naturally aspirated, Holley MAP sensors will keep your engine performing at its best. They're available in 1, 2, 3, 3.5, 5, and 7-bar models, with a variety of psi ranges. Choose the style preferred for your application.
( 17 )
$112.95
—
$199.95
Summit Racing™ offers high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes—and the computer uses this information to measure engine load so that the ignition timing can be advanced or slowed as needed. The World's Speed Shop® designed these devices to fit most GM engines, including the LS Series. Summit Racing Equipment® MAP Sensors feature factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$36.99
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 21 )
$42.99
APR offers MAP (Manifold Absolute Pressure) sensors as quality OEM replacements for your vehicle's factory original. As part of the fuel and engine management system, these MAP sensors measure the intake manifold pressure. The signal from these sensor components is used by the engine control module, along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. A faulty MAP sensor can cause a vehicle to run rich or lean. Optimize performance with APR MAP sensors.
Not Yet Reviewed
$129.95
The pressure inside your intake manifold is extremely important input to the ECU—so a quality MAP sensor from MSD is crucial to your engine's performance. These replacement sensors will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 to 5 V. They're available in several different versions for naturally aspirated engines, as well as engines with forced induction.
( 11 )
$179.95
—
$184.95
ACCEL MAP sensors provide manifold pressure info to your ECU. This data is used to calculate air density and determine the engine's air mass flow rate—which determines the required fuel metering for optimum combustion. These universal sensors are made with top-quality components for long life and are available in 3-bar models.
( 1 )
$145.95
On Sale
FAST MAP sensors, by monitoring intake manifold vacuum, measure the amount of load being placed on the engine. They relay engine load output to the ECU, which in turn adjusts fueling for optimum performance and economy. Choose between 1-bar, 2-bar, 3-bar, and 5-bar MAP sensors.
( 10 )
$279.95
$55.95
—
$251.96
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 19 )
$76.99
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement MAP sensors are built to fit and function just like the original parts. The manifold absolute pressure sensor is one of the sensors used in an internal combustion engine's electronic control system. Engines that use a MAP sensor are typically fuel injected. The MAP sensor provides instantaneous manifold pressure information to the engine's electronic control unit. The HalTech sensors are available in different styles: * 3 Bar GM MAP Sensor Includes: Matching plug and 3 pins * 4 Bar Motorsport MAP Sensor Includes: Matching male Deutsch DTM-3 Connector (HT-031001)
Not Yet Reviewed
$96.00
—
$245.00
Keep your Pro-Flo multi-point EFI systems performing their best with Edelbrock MAP sensors. These Manifold Absolute Pressure sensors are made with high-quality components for durability and dependability, and will have a role in making sure that your engine is fed the right mixture of fuel and air. Hold on to performance by making sure that your ride's computer is getting the right signals with Edelbrock MAP sensors.
( 4 )
$128.95
ICT Billet MAP sensor harness adapters make change happen—easily! They offer a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly. ICT Billet wire adapter harnesses are assembled with OEM tooling, connectors, lock seals, and terminals, and utilize factory harness wire colors. They're available in WeatherPack, Bosch, Delphi/GM, and Metri-pack connector styles for use on many Chevrolet small block LS-based engine applications from 1997 and up.
( 3 )
$36.99
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$26.99
—
$49.99
ICT Billet MAP harness extensions are ideal for use on many Chevrolet LS-based engines from 1997 and up. They're made with OEM tooling, connectors, lock seals, and terminals—and utilize factory harness wire colors. Don't chance a poorly running engine due to cheap wire connectors; choose the quality of ICT Billet MAP harness extensions.
( 4 )
$36.99
On Sale
You don't have to be intimidated when changing over from a carbureted system to electronic fuel injection. These FAST EFI sensor kits provide you with everything you need to make the conversion. They include a manifold absolute pressure (MAP) sensor, coolant temperature sensor (CTS), air temperature sensor (ATS), and a throttle position sensor (TPS). The sensors are manufactured from quality materials, are available for both Ford and GM-style systems, and include a wide variety of applications. The kits work great on normally aspirated, as well as supercharged, turbocharged, 4, 6, and 8-cylinder engines. Now you can take the mystery out of EFI by using one of these complete FAST EFI sensor kits.
( 1 )
$234.95
ICT Billet has your engine swap covered with their ECM wiring connector kits. These terminals, retainers, and connectors are all designed to work with OE sensors and factory connectors for the easiest installation possible! This is one area that you don't want to use poor quality components—which are subject to crimps, twisting, and unseated terminals. If the wiring has conductivity issues, your engine will run poorly, and the problem is hard to diagnose. ICT Billet has built its reputation on dependable, high-quality parts. Order the kit preferred for your application.
Not Yet Reviewed
$18.99
HalTech has been at the cutting edge of engine management technology since it first opened its doors in 1986. Today, Haltech ECUs are sold in over 50 countries around the world. They are the driving force behind many record-setting race vehicles. HalTech also has the wiring and connectivity accessories you will need. They offer a large grouping of engine and sensor plug and pin connector sets for ignition coils and crank/cam to MAP, temperature, and Flex fuel composition sensors. Adapt your factory harness utilizing HalTech's plug and pin connector sets.
Not Yet Reviewed
$12.00
ICT Billet has your LS swap covered with ICT Billet wiring pigtails. Options are available for standard and extended lengths on a multitude of applications. All designed to work with OE sensors for the easiest installation possible!
( 10 )
$18.99
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,049.95
—
$3,549.95
HalTech Motorsport fuel/oil/wastegate pressure sensors feature stainless steel diaphragms to accurately measure pressure and include matching Delphi plug and three pins. Available in two psi ratings, they are designed to be remote mounted and connected via a flexible hose. All HalTech Motorsport MAP and pressure sensors are individually electronically tested before packaging and are sold "as is" and without any further warranty. Select the psi needed.
Not Yet Reviewed
$205.00
The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)
( 7 )
$467.95
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,027.99
—
$1,499.99
HalTech's Nexus R3 ECU with plug and pin set combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device HalTech calls a VCU (Vehicle Control Unit). Product details: * 4 x 25 amp (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull / H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds, and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Offers an excellent solution for your engine management needs * Applications: Universal * What's in the box: -- (1) Nexus R3 VCU -- Plug and Pins: AMP 34 Pin 4 Row 3 Key Superseal -- Plug and Pins: AMP 34 pin 4 Row 4 Key Superseal -- Plug and Pins: Male Deutsch DTP-06-4S - Black connector (25 amp) VCU features: * Controlled via NSP (Nexus Software Programmer) * Long term learning * Stepper motor control * 4D closed loop boost control * Closed loop CO2 control * Rotational idle * Launch control * Traction control * Anti-lag * Dual knock control * Trans brake control * Race timer * Multi-stage fuel injection * Multi-level engine protection * 6-stage nitrous control * 4-sensor variable cam control * Intake air bleed control * Flat shift control * Shock travel and ride height control * Advanced torque management * On-board Wi-Fi * On-board data-logging (128MB) * AUTOMATIC TRANSMISSION CONTROL -- Ford AODE/4R70W -- GM 4L60E -- GM 4L80E -- Toyota A340E -- Lenco -- Liberty
Not Yet Reviewed
$2,535.00
HalTech's Elite 550 is a simple yet powerful ECU ideal for basic 4- to 8-cylinder or 1-2-rotor engine applications. Suitable for either naturally aspirated or forced induction engines, the Elite 550 gives you full control over fuel delivery, ignition timing and boost levels. This robust, competitively priced ECU features an environmentally sealed, waterproof case, four fuel and four ignition channels, and a 4 BAR internal MAP sensor. The Elite 550 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional details: * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF) * Sequential, semi-sequential, batch or multipoint injection patterns * Ignition modes include direct fire multi-coil, distributor ignition, or HalTech CDI systems * Connect to a wide range of dashes, displays, and expansion devices via CAN * Waterproof case (IP67) with USB cover fitted * 34 position AMP connector * 4 x fuel injection outputs (peak and hold (0-8 amps peak / 0-2 amps hold) * 4 x ignition outputs * 2 x dedicated engine position inputs with extensive trigger type support * 1 x digital pulsed input * 5 x digital pulsed outputs * 1 x analog voltage input * 3 x dedicated inputs (Throttle Position, Coolant Temperature, and Air Temperature) * Internal 4 Bar MAP sensor measuring up to 300kPa/3Bar/45psi of boost pressure * Up to 33 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP calibration software --- ECU FUNCTIONS: * Oxygen control: Closed loop with long-term learning for precise tuning (with optional external CAN O2 wideband controller kit) * Boost control: Closed loop with learning with flexible user-definable axis and six fully user-definable corrections modes (for example, boost by gear, road speed etc.) * Flex fuel function (direct sensor input): Tune your engine's boost, fuel and ignition by ethanol content * Low impedance injector control with programmable injector peak and hold currents * Closed loop idle speed control: requires 1 or 2 user-defined outputs (BAC type) * On-board and laptop data logging: Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics * CAN Bus communication for Haltech dashes and expansion devices or OBDII (view live engine data and set and clear diagnostic trouble codes) * 2 injection stages for use with rotary engines * ECU comes fully enabled, with no additional charges for advanced features --- ADVANCED TUNING: * Tuning table resolution up to 32 x 16 * Limitless tuning flexibility: Tune your engine by a combination of 3-D tuning tables combined with 3-D per cylinder compensations and multiple user-definable corrections * Tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height, or any channel for ultimate flexibility. Dual mapping is a thing of the past. * Per cylinder tuning correction – 3-D * Wideband O2: Connect up to 3 channels via CAN expansion devices * Thermocouples / EGT (Exhaust Gas Temperature): Connect up to 12 channels via external CAN expansion devices * Variable cam control: Independently control up to 2 camshafts. Requires a minimum of one user-defined input and output per variable cam
Not Yet Reviewed
$929.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
