2020 Computers, Chips & Programmers Ignitions & Electrical - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Holley Terminator X MAX Engine Control Modules

Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant

4.29 out of 5 stars ( 7 )

$1,229.95

On Sale

Edge EZX Modules With Insight CTS3

The Edge EZX module with Insight CTS3 is the ultimate performance upgrade for your 5th Gen RAM Cummins, offering total control over your truck with power adjustability on-the-fly. With easy installation, improved fuel economy, better towing performance, and feature control through the industry's first smartphone app, you'll be amazed by what EZX can do for your truck. Compatible with both Standard and High Output engine variants, the throttle response and drivability are exactly what you want and need. This module is completely plug-and-play and leaves no trace within the system when removed, helping to keep your warranty intact. Engineered and developed specifically for the daily driver and towing application, EZX is a safe, emissions-friendly upgrade you'll wish you would've made sooner. With gains as much as 60 hp and 130 lbs.-ft. of torque, the EZX can be adjusted while driving through your factory steering wheel controls, allowing you to fine-tune your driving experience at your fingertips. Using the innovative smartphone app available for download through your app store (available for both Android and IOS), you gain even more access to your truck's features, including: calibrating for tire size and gear ratio changes, throttle pedal sensitivity, max cruise control speed, exhaust brake/tow haul button recall, TPMS settings, engine temperature protection, gear display, fog lights with high beams, and even a turbo timer! EZX app also enables you to read and clear trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle. For the absolute best driving experience, pair EZX with the Edge Insight CTS3 to stayed informed of everything going on under the hood. EZX + Insight CTS3 kits give you everything you need to stay 'in the know,' including vehicle-specific A-pillar display mounts for factory fit and finish. Product features: * All-new EZX module and downloadable smartphone app * Insight CTS3 offers you the visibility to always know what going on under the hood * Includes vehicle-specific A-pillar mount for sleek OE styling and perfect CTS3 positioning * The EZX will allow you to control Power Levels and Engine High Idle through your steering wheel controls on-the-fly. All other features are controlled, enabled/disabled, or adjusted through the smartphone app.

5.0 out of 5 stars ( 1 )

$1,349.95

$1,213.95

On Sale

COBB Tuning Ford Accessport V3 Programmers

COBB Tuning Ford Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Ford ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Ford Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport Ford specific features: * Adjustable Traction Control: Adjust target slip on the fly and maximize grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level * Launch Control: Adjust on the fly with six pre-configured RPM slots based on track conditions and vehicle configuration * Change Map Slot: Allows instant changes to several calibration tables without re-flashing the ECU; each map slot is in a folder in the Map Switching Features group

4.29 out of 5 stars ( 7 )

$1,195.00

On Sale

Edge Pulsar LT Module with Insight CTS3 Programmers

The Edge Pulsar LT with Insight CTS3 Programmer is a new inline module for various Chevrolet and GMC applications—offering complete adjustability of many features, all from your steering wheel controls. Without modifying your truck's ECM, Pulsar LT offers you the ability to adjust throttle response, tire size, gear ratio, TPMS, and your top speed limiter. (Pulsar LT for Duramax applications can also be used to command a manual DPF regen cycle, automatic transmission relearn, clear DTC's and high idle the engine.) It connects directly to the vehicle computer system, making installation a breeze and leaving your factory warranty intact. Stepping it up one notch, this kit also includes the industry-leading Insight CTS3 monitor for all the live data you could ever ask for. The Insight is the most preferred digital gauge monitor in the market today, used by daily drivers and enthusiasts everywhere. It's the most comprehensive, state-of-the-art, multi-gauge touch screen display on the market. CTS3 is an instantaneous and inexpensive alternative to bulky, analog gauges that would otherwise cost hundreds of dollars and take hours to install. This is the perfect tool for those who want to monitor their vehicle's performance and prefer not to program their vehicle. It can also be intelligently configured to provide audible and visual alerts to help you protect your vehicle. A vehicle-specific A-pillar display mount is also included for a sleek, more permanent way to mount the CTS3 in the cab of your truck. These mounts offer an OE look, while keeping the monitor within easy reach without obstructing your view of the road. Order the model recommended for your vehicle and engine application. Product features: * Calibrate Tire Size (29 in. - 50.9 in.) * Adjust Throttle Response * Modify Gear Ratio (2.00 - 6.99) * Change Top Speed Limiter (98 - 140 mph) * Clear Diagnostic Trouble Codes * Transmission Relearn * Manual Regen * Reprogram TPMS Threshold (40 - 99 psi) * Simple Installation Process * Does Not Modify ECM

Not Yet Reviewed

$1,126.95

$1,013.95

—

$1,177.95

On Sale

Edge Pulsar MD Modules

Edge Pulsar MD modules unlock the full potential of your medium-duty diesel truck with an unparalleled blend of power, efficiency, and control, enhancing your driving experience, whether it's used for work or for play. Engineered with precision and innovation, Edge Pulsar MD modules are equipped with advanced tuning capabilities, delivering a noticeable boost in horsepower and torque, and providing drivers an exhilarating yet reliable performance upgrade. Experience the thrill of improved throttle response and power while maintaining the highest levels of engine safety and durability by continued use of the factory defuel and ECM monitoring systems. Seamlessly integrated into the vehicles on-board ECM and steering wheel controls, Pulsar MD modules offer a hassle-free installation process that requires no complex modifications or ECM flashing. This means the device is easily removed, returning the truck to stock settings in minutes. The plug and play functionality ensures that users can enjoy the benefits of enhanced performance and feature control like speedometer calibration for larger tires, without compromising the integrity of their vehicles factory settings. Elevate your driving adventure with Edge Pulsar MD. Features: * Five adjustable on-the-fly power levels: -- 1. Economy 25hp/70tq -- 2. Heavy towing 60hp/125tq -- 3. Light towing 90hp/180tq -- 4. Drive 95hp/255tq -- 5. Extreme 120hp/280tq (peak to peak gains) * Gains up to 135hp/300tq at 2,550 rpms * Speedometer calibration for tires up to 50 in. * Gained 2.1 seconds in 0 to 60mph tests * Command Manual Regeneration * Read and clear DTCs * Uses steering wheel controls to adjust levels and features

Not Yet Reviewed

$1,126.95

$1,013.95

On Sale

DiabloSport Trinity 2 EX PCM Swaps

DiabloSport Trinity 2 EX PCM swaps deliver the sleek look of their advanced T2 programmer, while you enjoy more power and improved drivability. Each swap kit sets you up with Trinity 2 EX high-resolution 5 in. capacitive touch screen with full-swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. DiabloSport PCM swap kits include a one-time, free cross shipment of an unlocked PCM directly to you. This allows you to swap the PCM in your vehicle, without disabling the vehicle for long periods of time to send the PCM in to be unlocked. And DiabloSport modified PCMs offer some of the best mods in the industry. The swaps will also include an OBD2 extension cable that will be required to install in order to allow tuning and monitoring on that dash. DiabloSport Trinity 2 EX PCM swaps are best-in-class tuning solutions for your vehicle.

Not Yet Reviewed

$1,177.95

Mopar Replacement ABS Modules

Mopar Replacement ABS modules are genuine OE replacements. That means your Chrysler, Dodge, Fiat, Jeep, and even some Mitsubishi models will receive the perfect part to repair and/or restore performance and safety, just as it should be. These modules are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Order the ABS module recommended to fit your application.

5.0 out of 5 stars ( 14 )

$1,047.99

On Sale

COBB Tuning Volkswagen Accessport V3 Programmers

COBB Tuning Volkswagen Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Volkswagen ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Volkswagen Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport * Accesstuner: Create custom calibrations using Accesstuner software; for modifications beyond COBB Stage Power Packages, custom tuning may be required. Volkswagen specific features (availability varies by model): * Adjustable Traction Control: Adjust target slip on the fly and maximize tire grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level between 3000 and 8000 RPM; enabled in COBB OTS maps * Launch Control: Adjust on the fly with six pre-configured RPM slots to dial-in based on track conditions and vehicle configuration; enabled in OTS Maps and configurable within Accesstuner Pro

5.0 out of 5 stars ( 1 )

$1,195.00

$1,075.50

On Sale

DiabloSport Modified PCMs

DiabloSport modified PCMs help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, you will need a compatible tuning device, such as a DiabloSports inTune i3 or Trinity 2 model (application dependent), in order to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, level up with the DiabloSport modified PCM best suited for your ride!

5.0 out of 5 stars ( 2 )

$1,177.95

—

$1,399.95

On Sale

Edge Pulsar V3 Modules

The best just got better! Edge Pulsar V3 modules add 50 percent more power as compared to the original models. Pulsar V3 modules adjust four major components to build power safely: injection pulse width, injection timing, fuel rail pressure, and airflow. Plus, they offer improved shifting across the board. Edge Pulsar V3 modules bring together powerful tuning, safety features, ease of installation, and direct control over your driving experience to optimize performance and drivability in every setting. They also include adjustment features that allow you to account for any changes you've made to your truck. Calibrate your speedometer for tire and gear changes, read and clear diagnostic trouble codes, adjust your TPMS settings on your new wheel/tire setup, or even adjust your speed limiter. After installing the Pulsar module, the only thing you'll wonder is why you didn't equip your rig with it sooner. Features: * Up To 136 hp and 293 torque to the wheels (some trucks netted over 150 hp) * Speed limiter adjustment * TPMS adjustment * Tire size adjustment * Axle ratio adjustment * Clear DTCs * Manual regeneration * Transmission re-learn * Five on-the-fly adjustable levels * Use steering wheel controls to adjust levels and features

Not Yet Reviewed

$1,126.95

$1,013.95

On Sale

DiabloSport Trinity 2 MX Performance Monitor/Pulsar LT Module Kits

DiabloSport Trinity 2 MX performance monitor/Pulsar LT module kits bring together the ultimate in vehicle control and monitoring. Packaging their one-of-a-kind in-line module with their most advanced digital gauge solution, these DiabloSport kits make it possible for you to easily adjust throttle response levels, tire size adjustment, TPMS options, speed limiter, and more without tuning or modifying your vehicle. They also include a vehicle-specific T2 pillar mount and the necessary hardware. The Pulsar LT connects directly to the vehicle computer system and makes its changes in-line with the other modules. Utilizing steering wheel controls, Pulsar LT owners can make all the changes they desire at any time, driving or parked. The Trinity 2 MX is an eye-catching, 5 in. full color capacitive touch screen that gives you the sharpest graphic display available, so you can keep a close eye on your vehicle's vitals. They feature an auto-dimming screen and a customizable background display.

Not Yet Reviewed

$1,299.95

$1,168.95

On Sale

Edge Pulsar Insight CTS3 Programmers

The Edge Pulsar Insight CTS3 Programmers are an advanced monitor and tuning combo that eliminates the need for ECU swaps, fuel pressure boxes and other underperforming tuning products. With simple installation, huge performance gains and the crisp insight display, this Edge Products tuner and monitor combo is all you need for the street. The Pulsar allows you to change power levels on-the-fly, without having to shut-off the vehicle and the module delivers up to 90 hp and 156 TQ and has a transmission relearn feature for the increase in power. Along with the relearn feature, the module also has transmission slip backdown to decrease power when clutch slip is detected in the transmission and allows you to recalibrate the speedometer for wheel, tire and gear changes through the Insight CTS3. The Insight CTS3 portion of this tuner/monitor combo has a sleek housing with a full-color high-resolution capacitive touch screen with haptic response. The Insight CTS3 can display power level, while monitoring rpm, boost psi, mph, gear, ECT, EGT and much more. Built-in safety features such as EGT backdown, high-idle adjustment, cold engine protection, gear change backdown, injector balance rates and much more can be monitored by the Insight. Key features of Pulsar Insight CTS3 programmers: * Wi-Fi updateable * Built-in turbo timer * Adjustable high-idle setting * Five on-the-fly adjustable power levels * Speed limiter adjustments * TPMS pressure adjustments * Enhanced throttle response with built-in throttle sensitivity control * Updates for Pulsar are managed through the Insight instead of requiring a laptop computer

Not Yet Reviewed

$1,449.95

$1,303.95

On Sale

Edge Insight CTS3 Monitors with Pulsar Modules

Edge Insight CTS3 monitors with Pulsar modules offer the best performance combo for late model Hemi trucks. The in-line Pulsar connects directly to the vehicle PCM, eliminating unnecessary wires in the engine compartment, and by doing so, Edge can control the vehicles signals to optimize performance gains, throttle response, MDS controls, mileage, and more. Additional Pulsar + Insight CTS3 kits feature: * Industry-leading 5 in. touch screen monitor * Pulsar offers eight performance levels * Adjust power levels on-the-fly through steering wheel controls or through Insight CTS3 * Power levels are displayed on the dash, as well as on the monitor * Add up to 30 hp on Hemi and Jeep * Improves economy, towing capabilities, throttle response, and performance * Tire size adjustment * Gear ratio adjustment * TPMS adjustment on Jeep * Turn off MDS on Ram Hemi * Auto start/stop disable on Jeep * No modifications to vehicles PCM leaving virtually no traces for warranty * Read/clear DTCs * Performance tests, including 0-60, 1/8th mile, 1/4 mile * Connects directly to the vehicle computer for a clean install, no wires * Multiple gauge layout and color options to customize your CTS3 look

Not Yet Reviewed

$1,299.95

$1,168.95