Availability
Showing In Stock Items. Show All 169 Items.
ACDelco GM Genuine Parts flex fuel sensors will tell you the composition of your fuel. How much ethanol is in your system? Well, you're about to find out. These sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. Allow GM Genuine Parts flex fuel sensors to provide the right answers for you to regain reliable, efficient performance.
( 8 )
$115.99
—
$238.99
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$157.46
—
$239.96
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$103.99
—
$239.99
Dorman offers cylinder deactivation solenoids, a.k.a. CD manifolds, that have been rigorously engineered to directly replace the original equipment on select vehicles. This design features multiple upgrades to help ensure performance and reliability—such as an increased sealing surface interface, a redesigned rod sub-assembly, and superior quality O-rings and gasket. Durably constructed, the solenoid rod is hardened for improved wear resistance and to help maintain tighter tolerances. Internal bore step incorporates a radius edge to prevent valve sticking for reliable operation.
( 1 )
$240.99
ACDelco throttle position sensors electronically inform the powertrain control module (PCM) of the throttle valve angle. The PCM uses this input to regulate your fuel and ignition systems. These replacement sensors are available in dozens of models for fitment on thousands of vehicles spanning a half-century. For the proper fit and performance, order the ACDelco throttle position sensor recommended for your application.
( 21 )
$116.99
ACDelco GM Genuine Parts nitrogen oxide sensors detect the NOx content of exhaust gas from diesel engines, and are factory-recommended replacements. The information from these sensors is used by the engine control module (ECM) to adjust various parameters and reduce harmful emissions. These OE sensors are manufactured to fit specific applications, providing the same performance, durability, and service life you expect from General Motors.
( 11 )
$215.99
The mass air flow (MAF) sensor detects the amount of air drawn into the engine and relays a signal to the engine control unit (ECU) to calculate the proper fuel delivery to the engine. DENSO created the world's first plug-in mass air flow sensor in 1996 and Denso mass air flow sensors meet the stringent requirements of auto manufacturers around the globe. Denso's improved MAF sensor technology utilizes a unique structure that reduces the exposure of the sensing unit. This helps to reduce sensor contamination for improved detection accuracy. Denso also uses a fine platinum wire sensing element coated with a glass film to further protect it from contaminants for extended sensor life. Key features and benefits of Denso mass air flow sensors include: * Denso's First Time Fit design allows for easy plug-in installation * Glass film coated sensing element reduces contamination and improves reliability * Platinum wire sensing element responds quickly to changes in air flow * Reduced size and weight * Sensing element air bypass structure is designed for improved detection accuracy * Helps deliver optimum combustion, performance, and emissions
( 6 )
$115.99
—
$159.99
Mopar Replacement crankshaft position sensors are genuine parts you can count on to supply the OE fit and function you're expecting. Manufactured from quality materials, their selection of sensors provides the perfect choice to repair and maintain your Mopar ride with the proper information to be used by the engine management system. Order the sensor designed for fitment with your make and model.
( 3 )
$208.99
ABS pulses at low speed can be frustrating and dangerous. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of the anti-lock braking system. Yukon Gear & Axle ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. They maintain your vehicle's sensor readings and allow your ABS system to function at its peak when you need it. Order the ring recommended for your application.
( 3 )
$109.99
—
$226.99
Mopar Replacement oil pressure sending units are genuine OE-replacements. That means your Chrysler, Dodge, Plymouth, Ram, Jeep—and some VWs—will receive the perfect part to repair and/or restore performance and safety, just as it should be. These sending units are made from high-quality materials to provide reliable, long service with the right fit, function, and value. Get accurate, viewable reads with the Mopar oil pressure sending unit designed for your vehicle application.
( 5 )
$114.99
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$101.99
—
$241.99
ACDelco GM Genuine Parts exhaust temperature sensors are designed to report the exhaust gas temperature to the engine control module. The temperature signal is then used by the control module to adjust fuel delivery and boost pressure to protect the exhaust after-treatment components from overheating and keep them operating efficiently. GM Genuine Parts are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors.
( 3 )
$113.99
Granatelli Motor Sports slot-style mass airflow sensors have been calibrated on their in-house MAF dyno and flow bench to optimize performance for your specific application. Designed to help you improve your mileage and throttle response, they also improve your overall performance from 2,000 rpm to redline without voiding your factory warranty. Granatelli Motor Sports slot-style mass airflow sensors can be installed in 10 to 15 minutes with basic hand tools and are compatible with most electronics and aftermarket bolt-on performance equipment.
( 7 )
$225.19
—
$235.66
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 85 )
$106.99
—
$135.99
Does some custom exhaust work require you to relocate your oxygen sensors? Then Kooks Headers oxygen sensor harnesses are just for you. They're available in several different lengths and for various applications. These harnesses are also assembled from high-quality components to meet or exceed OEM specifications. For an easy, hassle-free installation on your next exhaust project, choose Kooks oxygen sensor harnesses.
( 8 )
$110.38
Bully Dog has always been there to make your vehicle perform the way you want it with their programmers and tuners for gas and diesel powered trucks and SUVs. One of the problems with all modern-day vehicles is the throttle is operated electronically, not by a cable, so the vehicle computer dictates how much throttle to give. Bully Dog Thruster throttle boosters are here to help. This simple to use plug-and-play system gives you the throttle you want when you want. Installation is simple and can be removed anytime. Simply unplug the factory harness from the pedal, plug the Bully Dog Thruster throttle booster into the pedal and the other side into the vehicle harness. A rotary switch allows you adjust the sensitivity on-the-go so you can dial in the throttle you want. Bully Dog Thruster throttle boosters will amaze you with the performance gains you will achieve with this small device.
Not Yet Reviewed
$129.99
—
$138.99
Standard Motor offers over 40 steering angle sensors that show the rate of turn, wheel angle, and other data for a high-quality direct-fit replacement. Designed to deliver trouble-free, consistent performance, all steering angle sensors are made from high-quality materials for ultimate durability and are manufactured to meet or exceed strict quality requirements. Select the Standard Motor steering angle sensor recommended for your application.
Not Yet Reviewed
$211.99
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 108 )
$102.99
—
$165.99
The accelerator pedal sensor measures the position of the pedal and transmits this data to the control unit for setting the throttle elements or to the injection system. The advantage of this approach is that these parameters can be used to prevent wear on the clutch and drivetrain and to reduce CO2 emissions. Hella accelerator pedal sensors maintain safe, smooth operation for your vehicle, and they are high-quality replacements with availability for many European manufacturers. Available for automatic and manual transmissions; choose the pedal sensor needed for your vehicle.
Not Yet Reviewed
$102.99
—
$229.99
ACDelco GM Genuine Parts mass airflow sensors are a key part of the engine management system, and they are GM-recommended replacements for your vehicle's original component. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. These original equipment mass air flow sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 24 )
$105.99
Denso camshaft positioning sensors detect camshaft rotation during the engine-combustion cycle. Denso produces both magnetic resistant element (MRE) type and magnetic pick-up (MPU) type sensors. Features and benefits of Denso camshaft positioning sensors include: * Denso MRE sensors have a pair of MREs on an integrated circuit (IC) chip; this unique design is extremely accurate, even just after an engine is started * The molded IC chip is installed inside a cylindrical magnet so it is positioned closer to the gears that rotate with the camshaft--this design is almost 10 times more sensitive than Hall element type sensors * Denso uses a polyphenylene sulfide resin coating over the molded IC chip and cylindrical magnet for greater strength and superior resistance to substances like fuel, engine oil, and emission byproducts
Not Yet Reviewed
$107.99
—
$162.99
Standard Motor Products fuel pressure sensors ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Don't take chances with your fuel system. If your sensor is faulty, Standard Motor has a line of replacements to fit numerous models.
( 3 )
$107.99
—
$183.99
Dorman impact sensors signal the vehicle's onboard computer system during sudden, extreme deceleration--helping the computer to determine whether or not airbag deployment is necessary. They are plug-and-play for easy, economical installation, with no reprogramming necessary. The sensors are direct replacements for a proper fit; they also turn off the airbag light and help restore your airbag system to proper operation.
Not Yet Reviewed
$115.99
—
$220.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 16 )
$108.99
—
$226.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
