Availability
Showing In Stock Items. Show All 390 Items.
Summit Racing™ MDS solenoid plugs are designed to plug the hole where the old MDS solenoids used to live. Commonly used when swapping MDS engines into older non-MDS cars or retro fitting non-MDS cams.
( 4 )
$40.99
Wiring Specialties Pro Series coil pack harnesses are designed for a direct drop-in installation. These new nylon loomed harnesses will look and perform flawlessly. Select the ignition coil wiring unit tailored for your year/make and engine application. Pro Series coil pack sub-harnesses feature: * Brand new construction * High-temperature nylon looming with adhesive shrink tubing * High-temperature wire (280 degrees F) * OEM connector specs (no cheap aftermarket connectors that fall apart) * Designed for a factory-like installation * OEM wiring connections and 'T' junctions—no soldered * Fully tested after production for an easy plug-and-play replacement * Turnkey engine start guarantee
( 24 )
$169.99
ICT Billet LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Choose ICT Billet LS coil wire harness extension length and model recommended for your application.
( 2 )
$43.99
—
$105.99
Holley LS extended-length main engine harnesses are 22 in. longer than previous harnesses. Designed to fit most 24x and 58x LS engines from 1997-2012, they are a perfect fit for installers wanting to mount any Holley EFI ECU inside of the passenger compartment where it is away from the elements, and easy to access, such as on a roll bar or under the passenger seat. Notes: * Plug-and-play with Dominator, HP, Terminator X, and Terminator X Max ECUs * LS1/6 harness interfaces with 24x crank and 1x cam sensors * LS2/3/7 harness interfaces with 58x crank and 4x cam sensors
( 1 )
$672.95
Whether you want to add an automatic transmission to your vehicle with a FiTech fuel injection system or need to replace a damaged harness, FiTech transmission control harnesses get the job done. Repair or customize your vehicle's sensor layout the proper way with the FiTech transmission control harness designed for your application.
( 1 )
$153.00
The camshaft position sensors on your engine will only work with the correct pigtail connections. Chevrolet Performance offers these pre-made pigtails to properly fit the crank position sensor or the cam position sensor on select models. Trust Chevrolet Performance for OEM wiring replacement parts and more!
( 5 )
$44.99
Painless Performance EFI harnesses are designed for the 1998-2002 LS1 mechanical throttle body engines using a 1999 and up LS1/LS6 ECM with a 4L60E/4L65E automatic or T56 manual transmission. These engines were found in 1998-2002 Camaro and Firebird. These GM LS1/LS6 harnesses will also work on 1997-2004 Throttle-By-Wire (TBW) LS1/LS6 engines which have been changed to mechanical throttle body or any 1999-2006 (4.8, 5.3, and 6.2) Vortec truck engine which has been changed to a factory or aftermarket LS1 intake manifold, mechanical throttle body, and injectors.
( 1 )
$769.98
On Sale
Summit Racing™ oxygen sensor extension harnesses are a must with full-length headers and other specific applications. These extension harness sets feature a direct plug-in design to eliminate the cutting and lengthening of oxygen sensor wires, along with high-temperature sleeving to help protect the wires from heat. They're available in a variety of plug styles, harness lengths, and other options. Order the pair recommended for your vehicle.
( 13 )
$50.99
On Sale
You already have the wire and Holley EFI ECU connector kits have the rest of what you need to rewire your EFI installation. Fully terminate your own custom main harness with Holly EFI ECU connector kits. Features include: * Pre-terminated J1A/J1B Tyco Superseal connectors * 20 to 22 gauge pre-terminated wires * 16 to 18 gauge pre-terminated wires * Cavity plugs
( 3 )
$158.95
ICT Billet throttle body extension harnesses are assembled with OEM tooling, OEM Delphi components (connector, lock, seals, and terminals), and OEM harness wire colors. Don't take a chance with cheap wire connectors; poor quality materials can have conductivity issues that will cause your engine to run poorly and be difficult to diagnose. ICT Billet throttle body extension harnesses provide quality you can trust. Order the model recommended for your application.
( 1 )
$43.99
ICT Billet LS VVT to non-VVT camshaft sensor adapters convert your VVT harness to a non-VVT sensor. These harnesses are plug-and-play and are assembled using OEM tooling with OEM Delphi connectors and terminals. Order the model recommended for your vehicle and engine application.
( 4 )
$43.99
Dorman power window switches are high-quality replacements to facilitate the ups-and-downs of window operation. They're designed to meet all OEM specifications and install in the stock location. Dozens of styles are available for fitment in specific vehicles.
( 75 )
$10.99
—
$480.99
Painless Performance benchtop flash pigtails enable you to tune or read your PCM outside the vehicle. The pigtails connect to any 12 V source and include PCM and OBDII connections. Benchtop flash your LS Series PCMs effortlessly when using Painless Performance benchtop flash pigtails. They are available for a wide range of Chevy applications from the 1990s and up.
( 2 )
$149.99
aFe Control suspension logic ESD kits contain simple plug-and-play modules that eliminate the suspension control check engine light. This allows installation of aftermarket shocks or coilovers on vehicles previously equipped with electronic shock absorbers. ESD (electronic shock delete) kits are sold in sets of four, one for each shock, and feature anodized extruded aluminum heat sinks, abrasion-resistant braided wiring shields, and GM-style Metri-Pack connectors.
( 1 )
$372.00
ICT Billet camshaft position sensor adapter harnesses are used when converting from rear-block sensor to front-cover sensor. They will, for example, adapt a Gen IV LS sensor to a Gen III harness. The harnesses are made with OEM-grade TXL wire and assembled with OEM tooling and OEM Delphi (connector, lock, seals, and terminals). Order the model recommended for your application.
( 2 )
$43.99
ICT Billet has your LS swap covered with ICT Billet wiring pigtails. Options are available for standard and extended lengths on a multitude of applications. All designed to work with OE sensors for the easiest installation possible!
( 10 )
$22.99
—
$58.99
ICT Billet sensor harness extensions make change happen. They offer a selection of pre-terminated sensor to get you plugged in properly. From engine or intake swaps, ICT Billet harnesses have you covered.
( 4 )
$32.99
—
$43.99
ATP Automotive provides one of the widest product offerings of automatic gear-shifting control products, including transmission wiring harnesses, for most import and domestic vehicles. ATP designs and manufactures them to meet or exceed the OEM specifications to properly control your drivetrain. Get exact-fit, no-compromise replacement parts when you order the ATP automatic transmission wiring harnesses designed for your application.
( 1 )
$36.99
—
$117.99
AutoLoc electric window crank switches allow you to operate your power windows with your vehicle's original window crank handle. This eliminates the need to mount aftermarket switches in your door panels. To operate your electric window, simply rotate the window crank up or down 15 degrees. To ensure safety, AutoLoc offers a positive dead lock stop and a return-to-center spring design, which creates a heavy-duty system that won't break or snap. These switches are made of billet aluminum and stainless steel fasteners, and will work with your factory window crank to give your vehicle a traditional look. They're available in multiple shaft styles—and are ideal for all vehicles, including hot rods, custom trucks, and cars!
( 12 )
$199.95
LS Classic Series LS ignition coil wiring harness extensions give you an additional 48 in. of length to enable remote coil mounting. The harnesses are sold in pairs, and feature factory color-coded wires and weatherproof connectors that are designed to plug directly into the factory harnesses. Get the extra-length you need to enable your remote coil mounting, order your LS ignition coil wiring harness extension from LS Classic Series.
Not Yet Reviewed
$139.95
Whether you want to add a second O2 sensor to your FiTech fuel injection system or need to replace a damaged harness, FiTech oxygen sensor sub harnesses get the job done. Repair or customize your vehicle's sensors the proper way with the FiTech oxygen sensor sub harness designed for your application.
( 2 )
$58.00
ICT Billet offers wiring harness extensions for use with many Chevrolet LS-based engine applications from 1997 and up. These connectors are available in a variety of lengths, with 2, 3, 4, 8, or 10 pins. They can help with installing camshaft sensors, alternators, throttle pedals, throttle bodies, temperature sensors, MAP sensors, EVAP solenoids, and more. Each harness extension is made from factory-style materials and specs to ensure proper connection and optimum performance.
( 2 )
$43.99
—
$58.99
When you need to make automotive repairs, ACDelco's selection of replacement wiring harness connectors offers you the best fit and function sockets and pigtails to do a variety of jobs. These quality-built, OE-like connectors and adapters provide you with efficient, less costly repair options for GM and American Motors vehicles. They're available in male or female, with an assortment of pins/cavities to fill your needs. Service your vehicle with a name you know and trust--ACDelco.
( 24 )
$1.99
—
$50.99
Holley drive-by-wire throttle body wiring harnesses are designed for use with the Holley Dominator ECU, as well as the factory drive-by-wire throttle body. These harnesses feature pre-terminated connections, ensuring true plug-n-play installation.
Not Yet Reviewed
$474.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
