Availability
Showing In Stock Items. Show All 31 Items.
Tilton severe-duty Super Starters pack a lot of power into a compact package--a hefty 3.0 hp, in fact. That's enough to crank over just about anything, and they only weigh about 12 lbs. They feature full ball-bearing or needle-bearing construction that's little affected by heat or cold, and most are "clockable" for multiple choices of solenoid positioning. These starters are recommended for engines over 400 c.i.d., as well as high-compression V8s.
( 33 )
$420.75
—
$467.50
Ford Performance Parts mini high-torque starters are a great addition to your car. They feature a high-output motor with internal gear reduction that provides more cranking power than stock, yet is 30 percent smaller. Their smaller size brings the weight down 5 lbs. from OE starters and provides a great deal more header clearance. These are the perfect starters for vehicles with high-compression engines and tight-fitting headers.
( 80 )
$305.99
Powermaster Ultra Torque starters live up to their name by delivering 250+ ft.-lbs. of torque. They feature a machined aluminum adjustable mounting block, work with most oversized kickout oil pans, and work great for big cubic inch engines. The starters use a 2.5 kW, in a 3.4 hp motor.
( 234 )
$303.99
—
$341.99
Summit Racing™ Protorque Starters are 100 percent new! Our lightweight Nippondenso-type starters offer a 4.0:1 gear-reduction ratio and a whopping 1.9 HP. That's 222 ft.-lbs of racecar cranking power. If that's not enough cranking power to suit you, there are even more powerful 3.1 hp monsters, which are a pound lighter! They have a 4.44:1 reduction ratio and churn out an awesome 342 ft.-lbs. of torque. Both of our Summit Racing™ powerhouses are suitable for engines up to 502 c.i.d., and compression ratios of up to 18.0:1. GM versions are adjustable for five mounting positions; Ford types, for 18. And, to prevent corrosion and electrical shorts, both starters wear a gold dichromate finish.
( 599 )
$261.99
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 239 )
$449.95
—
$499.95
Sikky Manufacturing LSX starters offer reliable cranking power for engines up to a whopping 18.0:1 compression ratio. They are fitted with aluminum adapter/mounting blocks and their extremely low-profile provides maximum header clearance, especially on LS swapped vehicles.
( 1 )
$298.29
—
$474.99
When you turn the key and your vehicle is slow to turn over—or worse, there's no ignition at all—one of the prime suspects is a faulty starter. Getting the engine up and running for each drive begins with this unit, so it's wise to trust your replacement parts to ACDelco. The aftermarket parts giant manufactures starters to precise OE specifications for perfect fit and performance on virtually any vehicle on the road today. Don't wait until a weak, aging starter fails completely; install an ACDelco product …and turn the key with confidence!
( 196 )
$279.99
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 894 )
$257.99
—
$324.99
Upgrade your existing starter's performance with a new Powermaster Ultra Duty Diesel starter. These starters are stronger, faster, and tougher! They are able to turn over the most aggressive diesel engines in the harshest of environments. Featuring a 3.80:1 gear reduction, 260 ft. lbs. of torque and 3.6 horsepower these Powermaster Ultra Duty Diesel starters can handle anything.
( 243 )
$270.99
Meziere True Start 200 Series high-torque starters are designed to fit into tight areas. They provide adequate torque and spin speed for most Pontiac engines with moderate compression ratios, using Meziere's robust drive and custom planetary gear reduction. To alleviate starter failure, standard testing includes amp draw, power and rotational speed under load, as well as free rev-testing to ensure proper balance of internal rotating parts. These True Start starters will do well on any normally aspirated engine up to 420 cu. in. with compression ratio up to 12:1. In fact, they're recommended for nearly 600 applications from the 1960s, '70s, and '80s. Additional details: * Fits traditional Pontiac with 166-tooth flexplate * Proprietary Meziere drive ensures reliability * Slim inline design clears narrow frame rails and headers * Convenient clocking in 15 degree increments * Two high-strength precision starter bolts with washers and shim included
( 2 )
$512.76
With 1.9 hp and a 4:1 gear reduction ratio, these CVR Protorque starters are sure to get your engine cranking. These starters feature a unique aluminum housing to eliminate hot start problems and are adjustable (where applicable) to help clear suspension parts, oil pans, and exhaust systems. These CVR Protorque starters are sealed units with rubber O-rings and grommets and also have easily replaceable plungers and contacts.
( 156 )
$250.99
CVR Protorque Ultra starters live up to their name by delivering 250+ lb.-ft. of torque. They feature a specially wound field coil and armature to deliver that torque throughout the cranking range. The machined aluminum adjustable mounting block works with most oversized kickout oil pans, and are great for big cubic inch engines. The starters use a 2.5 kW, 3.4 hp motor that'll support up to 18:1 compression ratio.
( 15 )
$275.99
If your starter is no longer engaging your Harley's® engine, get it involved with All Balls Racing high-torque starters. They're manufactured with all-new components fine-tuned for starting your Harley-Davidson® V-Twin engine. Make it the perfect performance union with All Balls Racing starters. The high-torque starters feature: * Clutches with 20 percent oversize rollers * Idler gears manufactured from cold-headed steel * End-frames which are cold-chamber die-cast and precision-machined * Armature hairpins resistance-fused to the commutator * A 10/32 in. threaded output shaft * Conversion bolt for the earlier 1/4 in.-20 threaded output shafts * Choice of finish, including chrome or black powdercoat
( 3 )
$256.65
—
$500.94
ACDelco remanufactured starters are 100 percent performance-tested to ensure the ability to start your engine. They're engineered to fit your vehicle and built to provide the same performance, durability, and service life you've come to expect—at a great value! Damaged and obsolete parts are replaced, and the units receive 100 percent new bearings, bushings, and brushes for the ultimate in reliability. Over a thousand models are available; order the starter recommended for your vehicle. Don't wait until a weak, aging starter fails completely; install an ACDelco product … and turn the key with confidence!
( 53 )
$257.99
—
$267.99
Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!
( 184 )
$263.99
—
$269.99
TCI Permanent Magnet racing starters are engineered for racing and tight engine swaps where a smaller, lighter weight starter is desired. These are new, not rebuilt, starters that weigh almost 50 percent less than stock for less front-end pounds, and to provide extra room for headers and oil pans, as well as increased ground clearance. TCI Permanent Magnet racing starters are built with heavy-duty pinion bearings and a heavy-duty contact disc solenoid with 12 clocking positions for more consistent starts.
( 14 )
$385.95
TCI Racing starters are engineered for racing and tight engine swaps where a smaller, lighter weight starter is desired. These starters are new, not rebuilt. They not only reduce front-end pounds for better weight distribution, but they will also provide extra room for headers, oil pans, and increased ground clearance. TCI Racing starters are built with full ball bearings for less friction and more torque and a heavy-duty contact disc solenoid for more consistent starts. Their efficient design draws less amperage, leaving more power for your ignition system.
( 9 )
$437.95
Tuff Stuff Performance stock starters exceed OEM specifications for maximum performance. These full-size aluminum cast stock starters provide the torque necessary in several applications. The stock starters are available in triple chrome plated, natural, and powdercoat finishes—and they're assembled in-house in the USA. Tuff Stuff's diligent quality control ensures consistent, reliable high performance parts, so you know their "chrome will get you home"! Dozens of models are available; choose the starter designed for your vehicle.
( 188 )
$280.99
—
$306.99
HardDrive Easy Start kits provide a better gear ratio for better staring. The kits include a clutch basket with a bearing, a 66T starter ring, and a 9T starter pinion. These components will improve the starting on your high-compression engines by improving the starter-to-clutch basket gear ratio. Get going easier with HardDrive Easy Start kits.
Not Yet Reviewed
$336.56
Twin Power starters will bring your Harley® back to life and let it roar. These starters are 100 percent new, not remanufactured. They are direct replacements for OEM starters and will give years of service.
( 1 )
$387.95
—
$541.25
Bosch remanufactured starter motors are built for extreme heat, cold, and high demand. Every engine starter component is 100 percent factory-tested prior to and during remanufacturing to assure it meets or exceeds OE specs. Additional notes on Bosch Professional Preferred remanufactured starters: * Each unit is remanufactured, not rebuilt * Includes the highest quality of materials and the most technologically advanced processes * Offers premium starting performance * All shaft splines and load-bearing surfaces are lubricated with OE high-temperature grade * Armature continuity is tested, gauged, straightened, and shimmed
( 13 )
$265.99
HardDrive offers Fire Power starter motors for a wide range of Harley-Davidson© street bikes from 2007 and up. These direct factory replacements are brand new, not rebuilt, and will provide the same fit and performance as your original starter. (Replaces OEM part 31618-06)
Not Yet Reviewed
$349.25
—
$379.05
Rick's Motorsport starter motors are available for many street bikes, UTVs, ATVs, dirt, watercraft, and snowmobile applications. These starter motors are manufactured from high-quality materials that meet or exceed OEM specifications. If you're having problems with your starter, try replacing your factory starter motor with one of these today! All Rick's Motorsport starter motors come with a one-year warranty.
( 4 )
$257.95
—
$324.95
Denso remanufactured starters are subjected to a rigorous test and replacement routine that produces the lowest return rates in the replacement aftermarket. And every starter is exactingly bench-tested to ensure factory-original performance. Remanufactured components offer tremendous value, and by recycling valuable parts and precious raw materials, they're the environmentally responsible choice as well. Denso First Time Fit remanufactured starters are the ideal choice. Key features and benefits of Denso remanufactured starters include: * Solenoid coil 100 percent voltage tested. * All terminal bolts replated or replaced with copper to ensure a clean source of electrical current * Commutator polished, gauged, and performance tested * Housing re-tapped to OE standards and damage-checked for heat warping, corrosion, or improper surface alignment; then refinished * Pinion gear inspected and replaced as needed to meet engineering specifications * Field coil inspected and high-voltage tested * Armature cleaned and high-voltage tested to ensure reliable performance * All-new bearings, brushes, and seals * Maximum cranking torque under all conditions * Designed to start in extreme cold and hot weather conditions
( 22 )
$256.99
—
$292.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
