Availability
Showing In Stock Items. Show All 91 Items.
Clearance
Made For You Bowtie wire looms are molded from 6-6 Zytel nylon that is guaranteed not to fade, distort, stain, or discolor under normal use. They're designed specifically for 1987 and later Chevy center-bolt valve covers. They feature a unique Bowtie design that mounts to the center of your valve covers, and not only adds style but securely holds your plug wires, too. The looms contain Bowtie wire holders, molded nylon wire separators, and stainless steel mounting hardware. Their innovative design creates a neat, professional, custom look while keeping your plug wires out of high-heat areas.
( 4 )
$68.95
$49.50
Clearance
If your door jamb switches stop giving you a visual alert, you can quickly restore the function with replacements from Dorman. After all, leaving a door cracked open can result in a dead battery. These switch units are available for the front or rear doors, plus they look and fit like the OEM parts from the dealer but without the inflated dealership prices! They're mechanically and electrically precise for top-notch, long-lasting performance, and get tested to ensure a trouble-free installation. For quality OEM replacements, choose the Dorman door jamb switches designed for your application.
( 4 )
$140.99
$96.50
Clearance
Tuff Stuff Performance high-amp output Stealth black alternators are just what every ride needs. These units produce the most power at idle to keep your battery fully charged at all times. Tuff Stuff Performance products are hand-built with the best bearings, diodes, and copper windings available. Stealth black alternators are finished in a powdercoat that's 20 times more durable than ordinary paint and provides a consistent sheen for underhood accessories. They're available in a variety of amperages and case styles for fitment on thousands of specific vehicle applications.
( 353 )
$437.99
$223.50
Clearance
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 372 )
$43.99
$27.99
Clearance
Champion Copper Plus spark plugs have been original equipment on a wide variety of engines for many years. They feature nickel alloy centers and ground electrodes with efficient wear characteristics. In addition, the spark plugs' extrusion of copper into the center electrode allows for increased conductivity and heat control. Manufacturers have used them in non-automotive applications, such as lawn and garden and other power equipment. Replace your old plugs with Champion Copper Plus spark plugs for maximum reliability.
( 180 )
$3.99
$1.50
Clearance
Don't take chances with old, questionable, or faulty blower motor resistors that can leave you without heat or air circulation. Standard Motor Products blower motor resistors will control the electrical current flowing from the fan switch to the blower fan, allowing you to set the fan at different speeds. They are designed to exceed OEM specifications for dependable, maintenance-free operation. Restore your vehicle's HVAC functions with high-quality replacement parts from Standard Motor.
( 33 )
$232.99
$119.50
Clearance
NGK Resistor spark plug wire sets utilize a construction method known as "variable pitch" wire winding to create resistance to radio frequency interference. They have a lower resistance than conventional carbon core wires, which translates into longer wire life. At the center of each wire is a fiberglass stranded core, made from the same family of materials as those used in bulletproof vests. This core greatly enhances the overall strength of the wire and prevents the pulling strains that wires are often subjected to. The spark plug wires feature custom-designed terminal boots that provide an exact fit—and high-quality EPDM and silicone coverings to resist high temperatures, oil, and chemical damage. Each wire is fitted with a positive-locking, corrosion-resistant, nickel plated terminal end for a tight fit and maximum resistance to vibration and separation. The wires are numbered to correspond to cylinder numbers, and the coil wires are color-coded for a correct and easy installation. Order the Resistor set designed for your vehicle application.
( 106 )
$58.99
$38.50
Clearance
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 95 )
$67.99
—
$71.99
$46.50
—
$60.50
Clearance
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 101 )
$273.99
—
$433.99
$213.50
—
$226.50
Clearance
Dorman headlight dimmer switches restore your ability to change the headlight beam from high to low and vice versa. These electrical switches are quality floor-mount styles to fit your rig. Renew control of your headlight beams with the headlight dimmer switches from Dorman designed to fit your application.
Not Yet Reviewed
$86.99
$55.50
Clearance
Mopar Replacement universal wiring and pigtail kits facilitate repairs or upgrades involving OE electrical connectors. These kits include the necessary wire leads and connector ends to service your Mopar application. Harnesses are available for different vehicles and purposes.
( 1 )
$49.99
—
$75.99
$22.50
—
$29.50
Clearance
Astemo offers throttle position sensors a wide range of domestic and import vehicles. These stock replacements are built to OEM specifications for performance and longevity. A throttle position sensor is used to measure how open the throttle valve is—and therefore controls the amount of air which can flow into the engine's intake manifold. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the TPS model recommended for your application.
Not Yet Reviewed
$63.99
$42.50
Clearance
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 39 )
$19.99
—
$154.99
$3.50
—
$115.50
Clearance
Mopar Replacement distributor caps are genuine parts you can count on to supply the OE fit and function you're expecting. Manufactured for quality materials, they offer the perfect choice to repair and maintain your Mopar ride with renewed energy to spark performance.
( 2 )
$42.99
$24.50
Clearance
These Dorman throttle position sensors are made of high-quality materials and enable you to monitor the position of your throttle. They replace your factory throttle body position sensor. Dorman has the best quality OEM replacement throttle body position sensors you'll find on the market.
( 3 )
$39.99
$23.50
Clearance
Don't take chances with old or questionable relays that can leave you stranded. Standard Motor Products relays are designed to exceed OEM specifications for accurate, maintenance-free operation. These replacement units are available in dozens of configurations for easy installation on countless applications. Trust your vehicle's needs to Standard Motor Performance.
( 61 )
$8.99
—
$176.99
$6.50
—
$103.50
Clearance
Dorman starter bolts are the way to go when you want to mount your starter right. Designed to be direct replacements for the stock bolts, you can rest assured that you're using the right hardware for your installation. Don't take chances when installing your starter--mount it with Dorman starter bolts!
( 17 )
$2.99
$1.50
Clearance
The knock sensor is able to detect mechanical stress and produces a voltage when the car knocks or pings. Under heavy acceleration, it sends signals to the ECU and the ECU retards the ignition timing to compensate for the knocking, which in effect protects the pistons and rings from damage. Knocking also occurs when using low-grade fuel and having the knock sensor allows you to use different grade fuels without causing engine damage. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts knock sensors line has superior coverage for domestic and import applications.
( 3 )
$23.99
—
$26.99
$16.50
Clearance
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 140 )
$20.99
—
$32.99
$12.50
—
$24.50
Clearance
Autolite copper core spark plugs feature a cold-formed steel shell with precision-rolled threads, a full copper core electrode for better performance, and a one-piece terminal post to add strength. The ignition plugs use a copper-glass seal that bonds the insulator and terminal post center electrode together. This ensures full voltage at the spark gap and a 100 percent leak-proof, gas-tight seal. Autolite features an extensive application guide to cover just about everything with an internal combustion engine. Keep your engine running smoothly and reliably with Autolite replacement copper core spark plugs.
( 245 )
$4.99
$1.50
Clearance
Astemo offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 5 )
$96.99
—
$111.99
$67.50
—
$77.50
Clearance
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 3 )
$27.99
—
$81.99
$19.50
—
$61.50
Clearance
NGK Standard Series spark plugs are designed for stock replacement applications. These plugs have a hotter spark, which means better combustion—and that improves performance, while producing less harmful emissions. They're available in a variety of options for both universal and specific vehicle applications. Get the spark plugs used by winning racers: NGK Standard Series.
( 235 )
$10.99
$5.50
Clearance
Astemo MAP sensors support accurate measurement for reliable engine performance. Typically found in the induction system of the engine, the manifold absolute pressure sensors help the engine control module to manage engine characteristics to achieve the most efficient and longest lasting results. The sensor works by sending electrical signals to the ECM within a specified voltage range created by highly sensitive and accurate piezoelectric crystals, which, when compressed by the pressure in the induction system, generates an electrical output. Designed to meet the exact needs of each specific vehicle, the Astemo MAP sensors are the premium choice. Order the MAP sensor model designed for your application needs.
Not Yet Reviewed
$77.99
$54.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
