Selected Filters


Loading...

Availability


1994 CHEVROLET Computers, Chips & Programmers

Part Groups

Results 1 - 12 of 12

On Sale

Holley Dominator EFI Vehicle Management Systems

Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential

4.17 out of 5 stars ( 6 )

$3,149.95

$3,349.95


$2,833.95

$3,013.95

JET Stage 1 Computer Chips/Modules

JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.

3.89 out of 5 stars ( 98 )

$165.99

$337.99

Hypertech ThermoMaster Computer Chips

Hypertech ThermoMaster Power Chips replace your stock PROM, which holds the settings for fuel flow and spark advance. This is a Stage 2 chip that optimizes the spark and fuel curves for max performance. The ThermoMaster Power Chip is designed for use with a 160 deg. thermostat and premium pump gas (91 Octane or better). Maximize the performance of your ride with a Hypertech ThermoMaster Power Chip!

4.1 out of 5 stars ( 30 )

$126.99

$230.99

JET Stage 2 Computer Chips/Modules

JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust

3.6 out of 5 stars ( 113 )

$165.99

$341.99

Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits

Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.

Not Yet Reviewed

$1,364.95

Painless Performance VATS Computer Chips

Painless VATS computer chips allow you to bypass the factory programming, making the wiring in your engine swap a snap. Since 1989, most GM fuel injection systems have incorporated a Vehicle Anti-Theft System (VATS) programmed into the stock EPROM or PCM. This means the engine will not run if it is transplanted into a vehicle without the original vehicle steering column and decoder module. If you have one of these engines and your computer has the factory programming, you need Painless VATS computer chips to make your job trouble-free.

4.0 out of 5 stars ( 11 )

$52.99

Hypertech Street Runner Power Chips

Hypertech Street Runner Power Chips replace your stock PROM, which holds the settings for fuel flow and spark advance. This is a Stage 1 chip that improves the spark and fuel curves for better performance. It provides max power at wide-open throttle but does not affect the idle or part-throttle settings. This means your mileage and emissions aren't affected! The Street Runner Power Chip is designed for use on a stock vehicle using premium pump gas (91 Octane or better). Wake up your ride with a Hypertech Street Runner Power Chip!

4.24 out of 5 stars ( 41 )

$110.50

$219.99

ACDelco Gold Remanufactured Engine Control Modules

ACDelco Gold remanufactured engine control modules are high-quality replacements ideal for many vehicles on the road today. These modules regulate various parts of your vehicle's engine by taking the inputs from sensors and additional modules, and then referencing that information back to other sensors, modules, and areas of the vehicle. Remanufacturing the engine control modules is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and end-of-line tested to ensure they perform to factory specifications. These Gold remanufactured engine control modules will offer the same fit and performance you would expect from ACDelco.

Not Yet Reviewed

$102.99

JET Six Pack Performance Chips

Are you looking for a new performance chip but aren't sure which one to get? Now you don't have to worry--JET has taken away the guesswork with their Six Pack performance chips. They allow the driver to select from six different levels of performance with the push of a button. They include programs for economy, towing, Stage 1 and Stage 2 performance, valet mode, and security.

1.9 out of 5 stars ( 10 )

$293.99

$367.99

ACDelco GM Genuine Parts Remanufactured Engine Control Modules

ACDelco GM Genuine Parts remanufactured engine control modules are a GM recommended replacement for your vehicle's original component. These modules regulate various parts of your vehicles engine by taking the inputs from sensors and additional modules and referencing that information back to other sensors, modules, and other areas of the vehicle. Remanufacturing the engine control modules is an industry standard practice that involves disassembly of existing units, and replacing of components that are most prone to wear with new components. Damaged and obsolete parts are replaced and end of line tested to ensure they perform to ACDelco specifications. These GM Genuine Parts are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors. remanufactured engine control modules will offer the performance, durability and service life you would expect from General Motors.

4.38 out of 5 stars ( 8 )

$108.99

$147.99

JET Powr-Shift Computer Chips/Modules

JET Powr-Shift performance chips/modules will improve the performance of your car, truck, or SUV, adding up to 23 hp instantly with simple, plug-and-play installation. These JET Performance chips provide exclusive, full range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno tested to ensure the most possible horsepower and drivability from each application. JET Powr-Shift chips combine features of a Stage 2 performance chip with a more aggressive transmission program. Choose the one compatible with your vehicle.

4.75 out of 5 stars ( 4 )

$227.99

Dorman Remanufactured Transfer Case Control Modules

These Dorman remanufactured transfer case control modules are pre-programmed out of the box and install easily with plug-and-play wiring connectors. Factory transfer case control modules typically fail through corrosion under normal use; this results in the inability to shift in or out of 4WD mode. The modules are fully stress-tested for durability, so you can be sure that your 4WD won't get stuck in or out of gear next time.

4.37 out of 5 stars ( 19 )

$81.99

  • 1
  • Page 1 of 1