Availability
Showing In Stock Items. Show All 25 Items.
Powermaster PowerMax Plus starters are rated with high cranking torque and feature an offset gear reduction for increased performance. Their mounting blocks are made from durable billet aluminum and can be rotated in four positions to fit multiple locations. PowerMax Plus starters are available in either a natural or chrome finish and contain a tested dyno report in every box!
( 198 )
$177.99
Summit Bucks
When you turn the key and your vehicle is slow to turn over—or worse, there's no ignition at all—one of the prime suspects is a faulty starter. Getting the engine up and running for each drive begins with this unit, so it's wise to trust your replacement parts to ACDelco. The aftermarket parts giant manufactures starters to precise OE specifications for perfect fit and performance on virtually any vehicle on the road today. Don't wait until a weak, aging starter fails completely; install an ACDelco product …and turn the key with confidence!
( 210 )
$101.99
—
$264.99
Ford Performance Parts mini high-torque starters are a great addition to your car. They feature a high-output motor with internal gear reduction that provides more cranking power than stock, yet is 30 percent smaller. Their smaller size brings the weight down 5 lbs. from OE starters and provides a great deal more header clearance. These are the perfect starters for vehicles with high-compression engines and tight-fitting headers.
( 82 )
$251.99
—
$305.99
Tilton severe-duty Super Starters pack a lot of power into a compact package--a hefty 3.0 hp, in fact. That's enough to crank over just about anything, and they only weigh about 12 lbs. They feature full ball-bearing or needle-bearing construction that's little affected by heat or cold, and most are "clockable" for multiple choices of solenoid positioning. These starters are recommended for engines over 400 c.i.d., as well as high-compression V8s.
( 35 )
$480.25
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 907 )
$290.99
With their gear-reduction drives, heavy-duty Powermaster PowerMax starters really crank out the power--180 lb.-ft. of torque. So, they can handle engines with moderate compression ratios. If your stock starter clears your oil pan, the Powermaster PowerMax starters will, too. Some will also clear kicked-out pans. Powermaster PowerMax starters can be mounted in multiple orientations to fit your needs. Starter dyno reports are included.
( 1149 )
$169.99
Summit Bucks
You have the starter and bracket, but what about the fasteners? ACDelco offers durable starter bolts made from premium materials for reliability. Engineered to exacting OE standards, they've undergone stringent evaluation to guarantee proper fit and performance. The bolts are available in a variety of styles, lengths, and finishes. Order the model recommended for your vehicle.
( 12 )
$5.99
Powermaster Ultra Torque starters live up to their name by delivering 250+ ft.-lbs. of torque. They feature a machined aluminum adjustable mounting block, work with most oversized kickout oil pans, and work great for big cubic inch engines. The starters use a 2.5 kW, in a 3.4 hp motor.
( 239 )
$336.99
Summit Bucks
ACDelco GM Genuine Parts starters have components that are newly manufactured and are GM-recommended replacements for your vehicle's original starter. ACDelco GM Genuine Parts starters consist of a powerful DC motor coupled to the starter drive pinion. The starter drive pinion engages the engine flywheel to crank the engine, providing the same high standard performance, durability, and service life you expect from General Motors. Stay with the brand your vehicle came with and get the quality you know and trust with ACDelco.
( 22 )
$154.50
—
$190.99
Bosch remanufactured starter motors are built for extreme heat, cold, and high demand. Every engine starter component is 100 percent factory-tested prior to and during remanufacturing to assure it meets or exceeds OE specs. Additional notes on Bosch Professional Preferred remanufactured starters: * Each unit is remanufactured, not rebuilt * Includes the highest quality of materials and the most technologically advanced processes * Offers premium starting performance * All shaft splines and load-bearing surfaces are lubricated with OE high-temperature grade * Armature continuity is tested, gauged, straightened, and shimmed
( 13 )
$77.50
—
$147.99
Dorman starter bolts are the way to go when you want to mount your starter right. Designed to be direct replacements for the stock bolts, you can rest assured that you're using the right hardware for your installation. Don't take chances when installing your starter--mount it with Dorman starter bolts!
( 17 )
$3.99
Summit Bucks
ACDelco remanufactured starters are 100 percent performance-tested to ensure the ability to start your engine. They're engineered to fit your vehicle and built to provide the same performance, durability, and service life you've come to expect—at a great value! Damaged and obsolete parts are replaced, and the units receive 100 percent new bearings, bushings, and brushes for the ultimate in reliability. Over a thousand models are available; order the starter recommended for your vehicle. Don't wait until a weak, aging starter fails completely; install an ACDelco product … and turn the key with confidence!
( 54 )
$74.50
—
$132.99
ATI severe-duty super starters pack a lot of power into a compact package--a hefty 3.0 hp, in fact. That's enough to crank over just about anything, and they only weigh about 12 lbs. These starters feature full ball-bearing or needle-bearing construction that's little affected by heat or cold, and most are "clockable" for multiple choices of solenoid positioning.
Not Yet Reviewed
$685.99
If your starter is no longer engaging your Harley's® engine, get it involved with All Balls Racing high-torque starters. They're manufactured with all-new components fine-tuned for starting your Harley-Davidson® V-Twin engine. Make it the perfect performance union with All Balls Racing starters. The high-torque starters feature: * Clutches with 20 percent oversize rollers * Idler gears manufactured from cold-headed steel * End-frames which are cold-chamber die-cast and precision-machined * Armature hairpins resistance-fused to the commutator * A 10/32 in. threaded output shaft * Conversion bolt for the earlier 1/4 in.-20 threaded output shafts * Choice of finish, including chrome or black powdercoat
( 3 )
$391.34
Bosch's new starters are specifically designed to combat the heat and high electrical demands found in problem applications. These replacement units are 100 percent new and are made of high-quality components—from the castings right down to the nuts and bolts. The starters are available in stock and full size styles for both automatic and manual transmissions. Order the model designed for your vehicle application.
( 4 )
$237.99
Clearance
Denso remanufactured starters are subjected to a rigorous test and replacement routine that produces the lowest return rates in the replacement aftermarket. And every starter is exactingly bench-tested to ensure factory-original performance. Remanufactured components offer tremendous value, and by recycling valuable parts and precious raw materials, they're the environmentally responsible choice as well. Denso First Time Fit remanufactured starters are the ideal choice. Key features and benefits of Denso remanufactured starters include: * Solenoid coil 100 percent voltage tested. * All terminal bolts replated or replaced with copper to ensure a clean source of electrical current * Commutator polished, gauged, and performance tested * Housing re-tapped to OE standards and damage-checked for heat warping, corrosion, or improper surface alignment; then refinished * Pinion gear inspected and replaced as needed to meet engineering specifications * Field coil inspected and high-voltage tested * Armature cleaned and high-voltage tested to ensure reliable performance * All-new bearings, brushes, and seals * Maximum cranking torque under all conditions * Designed to start in extreme cold and hot weather conditions
( 20 )
$193.99
—
$294.99
Rick's Motorsport starter motors are available for many street bikes, UTVs, ATVs, dirt, watercraft, and snowmobile applications. These starter motors are manufactured from high-quality materials that meet or exceed OEM specifications. If you're having problems with your starter, try replacing your factory starter motor with one of these today! All Rick's Motorsport starter motors come with a one-year warranty.
( 4 )
$169.95
—
$274.95
All Balls Racing starter solenoids are must-haves for high performance starters. They feature a heavy-duty copper contact to ensure full current flow.
Not Yet Reviewed
$79.27
HardDrive offers Fire Power starter motors for a wide range of Harley-Davidson© street bikes from 2007 and up. These direct factory replacements are brand new, not rebuilt, and will provide the same fit and performance as your original starter. (Replaces OEM part 31618-06)
Not Yet Reviewed
$349.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
