Availability
Moroso street dress-up spark plug wire kits contain one set of Moroso Blue Max spiral core spark plug wires, four 2-hole wire looms, four chrome loom brackets, six spark plug separators, and a chrome distributor hold-down. These kits are designed to route the wires over the top of the valve cover and down to the spark plug on engines equipped with exhaust headers.
Not Yet Reviewed
$145.99
—
$171.99
To take advantage of the programmable Digital-7's Individual Cylinder Management system, a synchronization pickup must be incorporated so the ignition knows exactly which cylinder is firing. With this information, the MSD can begin your unique timing sequence through each cylinder! MSD offers two ways to accomplish this: Spark plug wire sync kits and cam sync pickups.
( 3 )
$178.95
In case you damage or misplace the fiber optic cable to your MSD spark plug wire sync kits, MSD offers this 12 ft. long optic cable as a quality replacement. These fiber optic cables are engineered to emit a clear signal to the power grid for individual cylinder timing, and are supplied with a yellow protective sleeve.
Not Yet Reviewed
$19.13
MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their own wire sets or need to replace damaged boots. The boots are made from a high-temperature silicone compound and feature a gray finish. The terminals have large crimp tabs to grasp the wire, and wide contacts to grip the distributor cap receptacle.
( 103 )
$14.42
—
$274.95
Designed exclusively for extreme-duty racing conditions, it's hard not to like all of the features in MSD's new Professional Racing Series spark plug wire boot and terminal kits. The boots feature a proprietary blend of materials to withstand much higher temperatures over a longer period of time than standard boots.
( 42 )
$39.50
—
$46.09
Labeling plug wires is fast and easy when you use DEI spark plug wire marker kits. The sleeves are made from high-temperature Mil Spec black heat shrink, and are tough enough to handle extreme underhood temperatures. The high shrink ratio of 3:1 allows the markers to slide over plug boot ends and still shrink tightly to the wires. DEI spark plug wire marker kits are numbered 1 through 8 in a high-visibility white ink that is oil and chemical resistant.
( 22 )
$13.99
Taylor offers these 8mm silicone spark plug boot and terminal kits for custom installs and repairs. They feature vibration-proof, spring-lock spark plug terminals, along with high-temperature boots.
( 124 )
$12.90
—
$33.60
ACCEL ceramic single wire replacement kits make a great replacement for the one wire that got cut, burned, or broken. Each kit includes a 60 in. long, 8mm Extreme 9000 ceramic wire with a ceramic boot preinstalled, 90 degree boots, and terminals for points and HEI caps. Select the spark plug boot end style needed for your application.
( 37 )
$39.47
—
$46.07
These spark plug and coil wire repair kits from Taylor are easy replacements for damaged individual wires. They're available for an assortment of wire types in a variety of colors and sizes to suit your application.
( 22 )
$16.20
—
$35.85
Moroso Ultra 40 spark plug boot and terminal kits are manufactured from high-temperature silicone. They are available in straight, 90 degree, and 135 degree ends.
( 11 )
$29.99
—
$43.99
Summit Racing™ spark plug boot and terminal kits let you complete or customize your wire set. Just one wire lead with the wrong boot can cause all kinds of havoc. Custom-fit your wires exactly the way you want. With these ultra high-temperature silicone boots and stainless steel terminals, you can be assured that you are doing the job right.
( 13 )
$9.99
—
$10.99
Dragon Fire boot and terminal LS conversion kits convert your non-LS distributor boot ends into LS coil packs. The components include 7mm to 8.5mm wires with brass terminals, stainless steel snap-locks, and extra-thick boots.
( 3 )
$29.95
On Sale
ACCEL universal single wire replacement kits are great for that one wire that got cut, burned, or broken. Each kit includes a 60 in. long, 8mm carbon/graphite core with boots and terminals for 90 degree male, 90 degree female, and straight points female towers. Service your spark plug wires with ACCEL.
( 7 )
$27.36
$20.52
—
$24.38
On Sale
Replace your worn-out or damaged boots with ACCEL boot and terminal kits. The premium-grade, silicone spark plug boots provide superior connection protection from dielectric leakage, moisture, dirt, and other chemical contaminants. High dielectric strength EPDM or premium-grade silicone distributor/coil boots provide excellent resistance to flashover and crossfire and protect the distributor cap and coil tower connections. Stainless steel spark plug terminals feature positive-locking snap clips to ensure long life, performance, excellent corrosion resistance, and a positive connection. Spring-loaded brass or stainless steel distributor terminals provide maximum electric conductivity and corrosion resistance.
( 2 )
$25.66
$19.25
These Blue Max spark plug boot and terminal kits from Moroso are manufactured from high-temperature silicone. They are available in three different end configurations to suit your needs. These kits come in sets of eight with positive, locking spark plug terminals.
( 5 )
$31.99
—
$49.99
Are you tired of replacing burned spark plug boots? Do you have headers that run too close to your spark plug boots? Are your spark plug boots hard to reach, making it hard to pull them without damage? If you answered yes to any of these questions, Summit Racing™ spark plug boot and heat shield kits could be your answer. They include new terminals as well as dielectric grease to seal out corrosion-causing moisture and help prevent the boot from bonding to the spark plug. With our ultra high-temperature silicone boots protecting the stainless steel terminal and the all-aluminum heat shield protecting the boot, you can be assured of long-lasting heat protection.
Not Yet Reviewed
$32.99
—
$33.99
These distributor and coil boot and terminal kits from Taylor are perfect for engine builders or for people doing repairs and maintenance. Kits are available with boots only, terminals only, and are also offered with both boots and terminals. Taylor makes it simple and convenient to get just what you need for your service, repair, or custom setup!
( 117 )
$5.40
—
$33.60
Granatelli Ford Coil-On-Plug connector kits utilize an exclusive solid stainless connector cable with stainless snap lock spark plug connectors and a patented EMI/RFI protection ring. This helps them exhibit near "0" ohm resistance, with RFI/EMI outputs less than OE. These kits increase power to the spark plug by up to 25 percent over stock, and their high-temperature silicone boots resist temperatures up to 500 degrees F. They're ideal for use with aftermarket headers and turbocharger systems, and installation is as easy as changing the factory units. These kits are engineered to exceed OEM specifications and to be OBD-II computer safe. Available with or without new coil packs.
( 3 )
$187.48
—
$625.28
Moroso Blue Max distributor boot kits are manufactured from high dielectric strength EPDM to provide excellent insulation. They are available for socket-style or male/HEI-style distributor caps. The socket-style boots feature brass terminals to provide maximum corrosion resistance, while providing high conductivity. The male/HEI boots use a positive locking terminal that won't fall off under high vibration or racing conditions.
( 2 )
$31.99
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 431 )
$73.69
ICT Billet universal LS spark plug wire sets are possibly the last ones you will ever need. These kits provide it all, no matter what your build is, where your coils are mounted, or what boots are required for each individual spark plug. Features include: * 5 ft. length plug wires (coil end assembled with 135 degree boot) * Spiral core wire, 350 ohm, with 8mm thick jacket * 8 plug wires, 8 each of 135 degree, 90 degree, and straight boots, and terminals
( 11 )
$139.99
Summit Racing™ Universal LS spark plug wire sets are what you need to move those coils off the valve cover. These kits provide it all, no matter what your build is, where your coils are mounted, or what boots are required for each individual spark plug. Features include: * 5 ft. length plug wires (coil ends pre-assembled with 135 degree boots for the GM LS and Gen V LT Style Coil Packs and 90 degree boots for the IGN-1A or "Smart Coil" Packs) * Spiral core wire, 120 ohm, with 8mm thick jacket * Eight plug wires, eight each of 135 degree, 90 degree, and straight boots, and terminals
( 7 )
$105.99
—
$109.99
Allstar Performance has a wide selection of items to assist with your building project including Race spark plug wire sets. Regardless of whether your venue is the track, open wheel, off-road pulling, tractor pulling, Drag race, hot rod, or road race, Allstar Performance is sure to have the performance parts and accessories that you need to help get you to the winner's circle.
Not Yet Reviewed
$144.99
Scott Drake spark plug wire sets are designed to factory specifications to deliver precise fit and finish. These replacements are constructed from top-quality materials, just like the originals, to restore the ignition performance you want from your classic car. Spark plug wire sets are available with different attributes for specific vehicle applications.
( 1 )
$72.55
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
