Spark Plug Wire Sets for Cars, Trucks & SUVs

BluePrint Engines Spark Plug Wire Sets

BluePrint Engines offers performance spark plug wire sets assembled with 90, 135, or 180 degree spark plug boot ends. The distributor ends are not assembled, leaving the customer the ability to custom assemble the wires to their desired lengths. Each kit includes a crimping tool, both male and female distributor ends, and a coil wire. Additional notes: * 90 degree spark plug boot ends are typically found on small block Chevy engines * 135 degree spark plug boot ends are typically found on big block Chev y engines * 180 degree spark plug boot ends are typically found on small block Chrysler and Ford engines

5.0 out of 5 stars ( 1 )

$79.99

—

$89.99

Summit Racing™ Street / Strip Series 8mm 300 Ohm Ignition Wires

With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! - Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business - Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery - Ultra-high heat silicone spark plug boots provide superior radiant heat protection - High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.

4.51 out of 5 stars ( 1023 )

$58.99

Allstar Performance Race Spark Plug Wire Sets

Allstar Performance has a wide selection of items to assist with your building project including Race spark plug wire sets. Regardless of whether your venue is the track, open wheel, off-road pulling, tractor pulling, Drag race, hot rod, or road race, Allstar Performance is sure to have the performance parts and accessories that you need to help get you to the winner's circle.

Not Yet Reviewed

$144.99

Engine Works 8.5mm Spark Plug Wire Sets

Engine Works has been delivering a comprehensive portfolio of high-quality, high-value, and high performance products since 1995, so you can trust them to get your vehicle "fired up". Engine Works 8.5mm spark plug wire sets are available in many different plug boot configurations with red, blue, or black wires, covering a wide range of engines and vehicle applications. Choose a set designed for your application in your preferred color.

4.0 out of 5 stars ( 1 )

$54.96

Moroso Ultra 40 Race Ignition Wire Sets

Moroso new Ultra 40 Race ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Features of these 8.65mm wires include a Kevlar® core that's four times stronger than Aramid cores, a class-leading 40 ohms of resistance per foot, nickel copper alloy conductors for superior spark energy transfer, an extra-thick EPDM layer for greater dielectric strength, high-temperature silicone boots that can withstand heat up to 600 degrees, and locking stainless steel plug terminals. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection, and their extra-thick diameter extends wire life by adding additional insulation against heat, chaffing, and contaminants.

4.73 out of 5 stars ( 135 )

$266.99

Stromberg E-Fire High Performance Spark Plug Wires

Stromberg E-Fire High Performance spark plug wires are designed for flathead Ford applications—whether you have a front mount (59A) or top mount (8BA) distributor. Designed to work with both electronic and points-style distributors, E-FIRE plug wires give you strong fire power with high-level RFI/EMI resistance. The spiral-wound, stainless steel suppression core is protected by tough fiberglass reinforcing braid for strength and flexibility. And the 100 percent silicone insulation resists high temperatures, moisture, oil and chemicals, and protects against arcing and voltage leaks. With low 500 Ohm/ft resistance, they get more energy into your plugs. With the Ford flathead engine firmly in mind, Stromberg designed the 90-degree cap terminals and boots to be pre-fitted for smarter 'distributor first' installation. This eliminates the difficult task of trimming front mount wires up close to the radiator where access is limited—and also leaves you free to use the supplied 90-degree spark plug boots or choose your own hot rod terminals. All leads are 7mm diameter, so they fit through your flathead plug wire looms or tubes. They're cut to length, too, with a long coil wire to reach your firewall.

5.0 out of 5 stars ( 3 )

$75.00

Davis Unified Ignition LiveWires

You need a good spark to make good energy and power. Davis Unified Ignitions LiveWires are spark plug wires that deliver the spark that you need for the energy that you want. Made with space-age, non-flammable, heat-treated glass braid, LiveWires provide heat protection up to 1,400 degrees F and offer excellent resistance to moisture and chemicals. They feature a spiral-core stainless steel wire wrapped around a magnetic core, offering extremely low-ohm resistance for optimum spark travel. And there is no radio interference, enabling them to work well with delay boxes and stutter boxes. LiveWires have a durable silicone jacket and insulation with heat-shrink applied between the boot and sleeving to keep dirt and moisture away from the wire terminals. Another excellent feature of these custom-fit, ready-to-go wires is that they're foolproof. Each wire is numbered on both ends for the correct cylinder—making installation, removal, and reinstallation hassle-free. LiveWires are available in eye-catching colors to match the sparking power that they provide. Quality wires are more than just wire and coverings. Make sure that you're wired to fire with LiveWires from Davis Unified Ignition and Performance Distributors.

4.3 out of 5 stars ( 464 )

$149.00

Taylor Spiro-Pro Spark Plug Wire Sets

Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.

4.63 out of 5 stars ( 666 )

$71.45

—

$94.40

Taylor Extreme Series Spiro-Pro Spark Plug Wire Sets

Get some serious protection from exhaust heat by installing a set of Taylor Extreme Series Spiro-Pro spark plug wire sets. They're the finest high performance street and race wires available today. These replacement wires have maximum firepower without radio interference, and provide up to 10 times less resistance than standard resistor core wire. Spiro-Pros are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone distributor boots with grips; and ceramic spark plug boots that can withstand up to 2,000 degrees F. Taylor Extreme Series Spiro-Pro spark plug wire sets are available in multiple terminal and boot end options, as well as your choice of colors.

4.35 out of 5 stars ( 26 )

$149.05

—

$160.20

Scott Performance High Performance Spark Plug Wire Sets

Scott Performance high performance spark plug wire sets feature 10mm 30 ohm fiberglass jacketed wire with helically wound alloy cores. The plug/distributor boots are high-temp silicone materials and the terminals are stainless steel. All spark plug wire sets are handmade and individually tested to assure quality and performance. They're available in different colors and multiple configurations to provide the perfect fit for your engine. Order the spark plug wire set suited for your application.

4.46 out of 5 stars ( 48 )

$149.66

—

$206.12

Taylor High Energy Spark Plug Wire Sets

Taylor High-Energy spark plug wire sets are an outstanding choice for replacement or a performance upgrade. These wires feature heat-resistant silicone jackets and boots, double spring-locking spark plug terminals for better gripping, an 8mm size for high-compression engines, and a resistor core to suppress radio interference. The spark plug wires can withstand temperatures of up to 500 degrees F—and they're available in a variety of options for distributor terminal and boot ends, assembled or not, and universal or direct-fit for specific applications.

4.36 out of 5 stars ( 226 )

$50.90

—

$62.90

PerTronix Flame-Thrower Spark Plug Wire Sets

Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy

4.42 out of 5 stars ( 118 )

$73.20

—

$103.95

Chevrolet Performance Bowtie Emblem Spark Plug Wire Looms

These Chevrolet Performance Bowtie Emblem spark plug wire looms feature six supports that are manufactured from stainless steel and have the Bowtie Emblem laser-cut into the support. They include nylon spark plug wire retainers and mounting hardware. The Chevrolet Performance Bowtie emblem spark plug wire looms bolt to the side of the cylinder head and run to the back of the block for easy connection to the distributor. These wire looms are designed for use with 8mm spark plug wires and can solidly hold the wire under any conditions. Dress up your engine compartment and keep your ignition from any unwanted crossfires with these Chevrolet Performance Bowtie emblem spark plug wire looms.

3.43 out of 5 stars ( 7 )

$240.05

Moroso Street Dress-Up Spark Plug Wire Kits

Moroso street dress-up spark plug wire kits contain one set of Moroso Blue Max spiral core spark plug wires, four 2-hole wire looms, four chrome loom brackets, six spark plug separators, and a chrome distributor hold-down. These kits are designed to route the wires over the top of the valve cover and down to the spark plug on engines equipped with exhaust headers.

Not Yet Reviewed

$164.99

—

$171.99

Sierra Marine MAGFORCE Ignition Wires

Sierra Marine MAGFORCE ignition wire sets are "electronics friendly". These spark plug wires protect all of your electronic devices and electronic engine controls from radio-frequency interference and electromagnetic interference, while delivering the maximum amount of voltage. Their exact-fit design ensures easy installation and years of trouble-free service. Sierra MAGFORCE ignition wire sets feature: * Moisture-proof, molded distributor insulators * High-quality conductive center carrier * Mag/wire-wound core delivers maximum voltage without RFI and EMI interference * High-tensile strength membrane for added durability and heat resistance * Innovative nylon reinforcing tape for added strength and durability * 8mm high-tear strength silicone jacket protects conductor up to 500 degrees F * High-temperature, pre-greased silicone insulators * Posi-lock stainless steel terminals resist corrosion

4.87 out of 5 stars ( 15 )

$55.99

—

$96.99

RESTOPARTS® Supplied Spark Plug Wires

RESTOPARTS® Supplied offers replacement spark plug wires for hundreds of Chevrolet, Buick, Pontiac, Cadillac, and Oldsmobile vehicles from the 1960s and '70s. These OE-style wires are assembled with distributor terminal ends, just like your factory originals. When restoring a classic car, even the small details matter—like unseen ignition components. Order the GM wires recommended for your application.

Not Yet Reviewed

$112.99

—

$140.99

Summit Racing™ Race Series 50 Ohm 8.5mm Ignition Wires

Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.

4.34 out of 5 stars ( 202 )

$91.99

On Sale

MSD 8.5mm Super Conductor Spark Plug Wire Sets

MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.

4.65 out of 5 stars ( 1994 )

$204.95

$108.85

—

$204.95

Taylor ThunderVolt 8.2mm Spark Plug Wire Sets

ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available

4.65 out of 5 stars ( 659 )

$107.65

PerTronix Flame-Thrower 7mm Stock Look Spark Plug Wire Sets

PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility

4.13 out of 5 stars ( 141 )

$64.50

—

$72.10

Taylor Street Thunder Spark Plug Wire Sets

Taylor Street Thunder spark plug wire sets offer great performance at an affordable price. They feature 8mm diameter black silicone construction with synthetic jacketing to resist heat, oil, and abrasion. Their 500 ohm per ft. resistance delivers greater spark energy, while improving power and fuel efficiency. By using a Kevlar® helically spiral-wound core conductor, Street Thunder wires provide greater strength and durability to suppress electromagnetic and radio frequency interference. Matching black silicone boots protect against high exhaust temperatures and double spring locking terminals make quick vibration-proof connections. Taylor Street Thunder spark plug wires are available in universal, race-fit, or custom-fit styles. Select the set that best suits your application.

4.58 out of 5 stars ( 445 )

$59.20

On Sale

ACCEL SuperStock 5000 Series Spark Plug Wire Sets

ACCEL SuperStock 5000 Series spark plug wire sets are available in many sizes, styles, and colors to cover most any needs and vehicles. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The result is higher performance through improved efficiency, quicker throttle response, and reduced emissions. The wires feature silicone construction and are rated for 450 to 550 degrees F (depending on the set). The wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Choose your set.

4.33 out of 5 stars ( 48 )

$114.95

FiTech Go-Spark Ceramic Spark Plug Wire Sets

Enjoy better reliability and performance with FiTech Go-Spark ceramic spark plug wire sets. Each spark plug is preassembled from ceramic and carefully crafted with the proper end angles in mind, sparing you the hassle of custom trimming. Select the spark plug wire set designed for your application needs.

5.0 out of 5 stars ( 1 )

$135.00

Denso Ignition Wire Sets

Denso ignition wire sets fit right, look right, and work perfectly. Their end caps are identical to OE and are designed to "click" into place for easy installation and a secure fit. An installer can feel and hear that a solid connection has been made, even in a difficult-to-see location. Through a patented process, the terminals are attached with an extremely strong connection ensuring the cable and boot will not separate during removal and installation. Each wire in the set is pre-cut to exact length so the wire sets are ready to install right out of the box. Denso 7 and 8mm ignition wire sets are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40 to 428 degrees F and pass tests covering everything from electrical properties, to shrinkage, to chemical resistance, and accelerated life testing. Features and benefits of Denso Ignition Wire Sets include: * High-temperature silicone jacket to withstand heat, cold, chemicals, and moisture * Reinforcing member for added strength and terminal retention * Silicone insulation for superior dielectric and heat performance * Conductive silicon layer on 7 and 8mm wires for high-temperature performance and EMI/RFI noise suppression * Fiberglass braid for maximum strength on 7 and 8mm wires * Carbon-impregnated fiberglass core for superior conductivity on 7 and 8mm wires * Core reinforced with KEVLAR® on smaller diameter wires * Conductive layer impregnated with Ferrite on smaller diameter wires * Wire-wound layer on smaller diameter wires to suppress EMI/RFI noise * Superior dielectric and thermal qualities * Factory-original fit, appearance, and performance * World-class chemical and oil resistance

3.9 out of 5 stars ( 10 )

$36.99