Availability
Showing In Stock Items. Show All 64 Items.
These distributor and coil boot and terminal kits from Taylor are perfect for engine builders or for people doing repairs and maintenance. Kits are available with boots only, terminals only, and are also offered with both boots and terminals. Taylor makes it simple and convenient to get just what you need for your service, repair, or custom setup!
( 118 )
$5.40
—
$33.60
Engine Works has been delivering a comprehensive portfolio of high-quality, high-value, and high performance products since 1995, so you can trust them to get your vehicle "fired up". Engine Works universal HEI/coil wire kits are available in several plug end angles with red, black, or blue wires. Choose the set you prefer.
Not Yet Reviewed
$62.46
Moroso Blue Max distributor boot kits are manufactured from high dielectric strength EPDM to provide excellent insulation. They are available for socket-style or male/HEI-style distributor caps. The socket-style boots feature brass terminals to provide maximum corrosion resistance, while providing high conductivity. The male/HEI boots use a positive locking terminal that won't fall off under high vibration or racing conditions.
( 2 )
$31.99
Are you changing distributors or distributor caps, going from female distributor cap towers to male towers, or vice-versa? Or, are you looking to put a retainer ring on your distributor? If so, then these Summit Racing™ distributor boots and terminals are just what you need. Our high dielectric strength boots and stainless steel and brass terminals give you assurance that you are doing the job right.
( 8 )
$4.99
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 197 )
$88.99
—
$92.99
Allstar Performance has a wide selection of items to assist with your building project including Race spark plug wire sets. Regardless of whether your venue is the track, open wheel, off-road pulling, tractor pulling, Drag race, hot rod, or road race, Allstar Performance is sure to have the performance parts and accessories that you need to help get you to the winner's circle.
Not Yet Reviewed
$144.99
On Sale
MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their own wire sets or need to replace damaged boots. The boots are made from a high-temperature silicone compound and feature a gray finish. The terminals have large crimp tabs to grasp the wire, and wide contacts to grip the distributor cap receptacle.
( 103 )
$59.25
$12.98
—
$53.35
Lokar Vintage Series spark plug wires are available in a variety of vintage-inspired colors that will provide your ride's engine with a nostalgic look without sacrificing performance. These Lokar 7.80mm wires feature a spiral wound core with RFI suppression, 1,000 ohm/ft. resistance, and a durable lacquer covered cotton woven housing over EPDM silicone. The wire sets are available for V8 engines with HEI or standard style distributor caps as well as LS Chevy engines with valve cover mounted coil packs. All Lokar Vintage wires come with the plug wire boots pre-installed.
( 1 )
$165.95
—
$231.95
Moroso Ultra 40 spark plug boot and terminal kits are manufactured from high-temperature silicone. They are available in straight, 90 degree, and 135 degree ends.
( 11 )
$29.99
On Sale
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 131 )
$112.95
$101.65
Pico ignition wire boots are available in sizes and styles for many popular applications. These spark plug distributor boots are manufactured from high-quality materials—so you can be confident of their long-lasting performance. If you've changed distributor types, need a different boot angle, or just need to repair your ignition wires, order the Pico boots recommended for your vehicle.
( 3 )
$97.99
Engine Works has been delivering a comprehensive portfolio of high-quality, high-value, and high performance products since 1995, so you can trust them to get your vehicle "fired up". Engine Works 8.5mm spark plug wire sets are available in many different plug boot configurations with red, blue, or black wires, covering a wide range of engines and vehicle applications. Choose a set designed for your application in your preferred color.
( 1 )
$54.96
These spark plug and coil wire repair kits from Taylor are easy replacements for damaged individual wires. They're available for an assortment of wire types in a variety of colors and sizes to suit your application.
( 22 )
$20.52
—
$35.85
On Sale
Simplify your ignition system installation. MSD replacement coil wires are used when attaching an MSD Blaster coil to an their HEI dust cover or distributor. The pre-assembled wires include two 90 degree boots and two dual crimp terminals.
( 96 )
$32.91
$26.83
—
$32.91
Moroso Ultra 40 coil wire kits are available sleeved and unsleeved. The kits allow installation of an ignition coil in a remote location or they can be used as replacement wire in a wire set. They feature Moroso Ultra 40 high performance ignition race wire that maximizes energy transfer and minimizes EMI and RFI interference noise. It is available in blue or black. The unsleeved kits contain 72 in. wire, and the sleeved kits contains 48 in. wire with 48 in. high-temperature sleeving. Sleeving adds extra dielectric strength, extends spark plug wire life, and protects against exhaust heat, chaffing and contaminants. All Moroso Ultra 40 coil wire kits include: * 2 HEI 90-degree distributor boots * 2 HEI 90-degree spark plug boots * 4 HEI terminals * 2 Non-HEI 90-degree boots * 4 Non-HEI terminals * 2 coil boots
( 12 )
$37.99
—
$60.99
PerTronix MAGX2 Ceramic boot wires are designed to prevent burnt wires from the high temperatures generated by your performance engine. Each wire is constructed from two layers of ultra-high temperature silicone and rated up to 600 degrees F. The ceramic boots provide protection to direct heat up to 2,000 degrees F. Available in universal sets with straight, 45 or 90-degree boots, these kits include the distributor boots and terminals for both male and female style distributor caps. Additional notes: * Two paths for the current: Features a spiral wound stainless steel alloy wrapped around a carbon impregnated fiberglass center core * Low 500 ohm per foot resistance
( 4 )
$145.85
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 662 )
$49.85
—
$157.00
Taylor coil wire kits include all of the terminals, boots, and spark plug wire you need to hook up just about any ignition coil. They include both male and female terminals for the distributor end, as well as for the coil attachment.
( 93 )
$13.14
—
$24.90
Scott Performance high performance spark plug wire sets feature 10mm 30 ohm fiberglass jacketed wire with helically wound alloy cores. The plug/distributor boots are high-temp silicone materials and the terminals are stainless steel. All spark plug wire sets are handmade and individually tested to assure quality and performance. They're available in different colors and multiple configurations to provide the perfect fit for your engine. Order the spark plug wire set suited for your application.
( 47 )
$81.30
—
$208.69
Allstar Performance snap-on spark plug wire retainers are a quick and easy way to prevent your spark plugs from coming loose from your distributor cap. They are made from durable, lightweight plastic in your choice of colors. Compatible with countless Chevy HEI distributors, they also work with most OE and aftermarket HEI distributors.
( 12 )
$6.99
You need a good spark to make good energy and power. Davis Unified Ignitions LiveWires are spark plug wires that deliver the spark that you need for the energy that you want. Made with space-age, non-flammable, heat-treated glass braid, LiveWires provide heat protection up to 1,400 degrees F and offer excellent resistance to moisture and chemicals. They feature a spiral-core stainless steel wire wrapped around a magnetic core, offering extremely low-ohm resistance for optimum spark travel. And there is no radio interference, enabling them to work well with delay boxes and stutter boxes. LiveWires have a durable silicone jacket and insulation with heat-shrink applied between the boot and sleeving to keep dirt and moisture away from the wire terminals. Another excellent feature of these custom-fit, ready-to-go wires is that they're foolproof. Each wire is numbered on both ends for the correct cylinder—making installation, removal, and reinstallation hassle-free. LiveWires are available in eye-catching colors to match the sparking power that they provide. Quality wires are more than just wire and coverings. Make sure that you're wired to fire with LiveWires from Davis Unified Ignition and Performance Distributors.
( 462 )
$129.00
—
$189.00
Flame-Thrower spark plug wires from PerTronix deliver a "high performance" look to your engine compartment, along with true high performance! They're available in universal or application-specific sets; assembled or not; for a variety of engines; with different distributor terminal and spark plug boot end options; multiple colors, sizes, and more. Features include: * Low 500 ohm per foot resistance * Silicon jackets to resist high temperatures, moisture, oil, and chemicals * EPDM (Ethylene Propylene Diene Monomer) rubber inner insulation for superior heat resistance and prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility * Two current paths for reliability and redundancy
( 118 )
$55.65
—
$144.25
Moroso coil wire kits include all of the terminals, boots, and spark plug wire you need to hook up just about any ignition coil. They include both male and female terminals for the distributor end as well as for the coil attachment.
( 5 )
$31.99
—
$45.99
RESTOPARTS® Supplied offers replacement spark plug wires for hundreds of Chevrolet, Buick, Pontiac, Cadillac, and Oldsmobile vehicles from the 1960s and '70s. These OE-style wires are assembled with distributor terminal ends, just like your factory originals. When restoring a classic car, even the small details matter—like unseen ignition components. Order the GM wires recommended for your application.
Not Yet Reviewed
$43.50
—
$84.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
