Availability
Showing In Stock Items. Show All 14 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1972 )
$112.95
—
$699.95
$101.65
—
$454.95
On Sale
Get some serious protection from exhaust heat by installing a set of Taylor Extreme Series Spiro-Pro spark plug wire sets. They're the finest high performance street and race wires available today. These replacement wires have maximum firepower without radio interference, and provide up to 10 times less resistance than standard resistor core wire. Spiro-Pros are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone distributor boots with grips; and ceramic spark plug boots that can withstand up to 2,000 degrees F. Taylor Extreme Series Spiro-Pro spark plug wire sets are available in multiple terminal and boot end options, as well as your choice of colors.
( 26 )
$160.20
$144.18
On Sale
Mallory Pro Sidewinder spark plug wire sets are the company's most advanced wires. Their special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference—and at the same time allows the type of ignition system performance previously available only with Mallory Pro wires. The high-temperature silicone jackets can withstand more than 500 degrees F. Pro Sidewinders are available in ready-to-use sets cut for specific applications, or extra-long universal sets. Features: * Low 300 ohm resistance spiral core delivers high energy output for maximum spark at the plug * Great RFI suppression meets the demands of today's on-board electronics, such as electronic ignition, sound systems, and computer controls * 8mm ozone-resistant red silicone jacket repels water, oil, grease, and fuel—and withstands temperatures up to 500 degrees * Available in ready to install kits for various applications or universal V8 kits
( 34 )
$145.75
—
$199.95
$80.95
—
$149.95
On Sale
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 302 )
$102.90
—
$179.30
$92.61
—
$161.37
On Sale
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 662 )
$77.95
—
$154.90
$70.16
—
$139.41
On Sale
Mallory's Pro Wire spark plug wire sets are designed to meet the demands of every performance driving application. These wires feature a high-tech, carbon-impregnated fiber core to deliver energy while suppressing interference for on-board electronics. An 8mm silicone jacket repels water, oil, grease, and fuel, while withstanding temperatures of up to 500 degrees F.
( 8 )
$101.95
—
$110.95
$66.95
—
$83.95
On Sale
Whether your vehicles are old or new, they periodically need tuneups. Crown Automotive spark plug wire sets are replicas of the OE wires for correct lengths and quality every time. These 7mm wires have spiral core technology and RFI suppression in order to play nicely with other electronics. Leave the guesswork behind with Crown Automotive spark plug wire sets.
( 9 )
$16.99
—
$66.99
$15.29
—
$60.29
On Sale
For street or race track use, ACCEL 8.8mm custom fit ignition wire sets will provide your motorcycle the ultimate in ignition wire performance. These ready-to-install custom fit wires provide better performance, both electrically and mechanically. ACCEL 8.8mm wires have an extra thick jackets covering strong fiberglass braids that covers a layer of premium silicone and all that covers high capacity conductors; either stainless steel alloy for conductivity and mechanical strength or carbon graphite for Harleys with electronic ignition to protect control modules. All 8.8mm custom fit wires employ factory installed positive locking stainless steel terminals with dielectric strength silicone boots on the plug end and high conductivity brass coil terminals on the coil end for an easy, secure, leak proof, weatherproof installation. Winning technology for your motorcycle from ACCEL.
Not Yet Reviewed
$52.69
$47.45
On Sale
ACCEL motorcycle 8mm S/S custom fit ignition wire sets feature extra-thick 8mm silicone jackets and silicon insulation to eliminate RFI interference that interrupts electronic ignitions. S/S wire can deliver up to five times more peak energy than "Screaming Eagle" wire sets and it can do so at high temperatures. The ultra-strong Aramid core and fiberglass braiding provide resistance to vibration and "wire stretch" for wire sets that are durable and reliable. S/S spark plug wire is available in custom fit sets that are preterminated and ready for a quick and easy installation. ACCEL motorcycle 8mm S/S custom fit ignition wire sets are recommended for use on all carbureted and fuel injected motorcycles and are available in 4 colors--blue, black, red, and yellow.
Not Yet Reviewed
$60.39
$33.21
On Sale
ACCEL motorcycle S/S wire sets provide maximum RFI protection to shield sensitive electronics. These custom wire sets feature extra-thick, 8mm silicone jackets and silicon insulation to eliminate electrical leakage or radio-frequency interference that interrupts electronic ignitions, especially the Delphi. ACCEL motorcycle S/S wire sets feature: * Designed specifically for Harley Twin Cam applications * Compatible with both carbureted and fuel injected systems * Up to 5 times more peak energy than other "performance" wires * Available in several colors * Custom-fit sets are ready to install--no cutting or splicing required * 8mm 500 ohms per foot
Not Yet Reviewed
$65.85
$36.22
On Sale
ACCEL SuperStock 4000 Series spark plug wire sets will upgrade your OE ignition system for high-spark delivery levels and RFI suppression. They extrude the silicone jacket over a tightly woven, rugged fiberglass braid that meets or exceeds OE specifications. ACCEL offers their SuperStock 4000 Series wire sets in various color schemes to match nearly any application! More product features include: * Jackets rated up to 450 degrees F * 7mm or 8mm yellow, red, black, and blue silicone jackets * Orange and other color-matched spark plug boots with terminals * Available for pre and post-HEI vehicles * Custom-fit, universal, and import
( 133 )
$68.99
—
$79.05
$51.74
—
$71.15
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 463 )
$218.95
$120.95
On Sale
ACCEL SuperStock 5000 Series spark plug wire sets are available in many sizes, styles, and colors to cover most any needs and vehicles. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The result is higher performance through improved efficiency, quicker throttle response, and reduced emissions. The wires feature silicone construction and are rated for 450 to 550 degrees F (depending on the set). The wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Choose your set.
( 51 )
$97.49
—
$110.95
$73.12
—
$99.85
On Sale
ACCEL 8.8mm spiral wire sets are custom-tailored for true street/strip performance use. They feature oversize 8.8mm ultra performance wires and spark plug boots, double silicone construction with a fiberglass braid, and a spiral-wound steel core conductor. The sets are available with distributor terminal ends and spark plug boot end options for fitment on a variety of specific applications. If you're looking for excellent ignition performance for your street/strip ride, order the ACCEL 8.8mm spiral wire set designed for your vehicle.
( 5 )
$166.95
$108.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
