Availability
Showing In Stock Items. Show All 15 Items.
Top Street Performance premium ignition wires deliver superior performance and durability in various color themes to match your engine bay. Their spiral-wound core suppresses RFI (radio-frequency interference) and features excellent ohm-per-foot resistance. Around the core is a braid that provides superior pull strength, and the outer jacket is composed of premium high-density material with a high-temperature rating and a quality finish to resist damage from water and chemicals. Top Street Performance delivers quality performance with the premium spark plug wire sets designed and styled for your application.
( 5 )
$98.76
Made For You horizontal top mount wire looms are made from 6-6 zytel nylon that is guaranteed not to fade, distort, stain, or discolor under normal use. They're designed specifically for 1987 and later Chevy center-bolt valve covers. The looms contain mounting brackets, molded nylon wire separators, and stainless steel mounting hardware. Their innovative design creates a neat, professional, custom look while keeping your plug wires out of high-heat areas.
( 70 )
$60.95
—
$64.95
Top Street Performance offers ball-milled billet aluminum wire loom sets that not only organize your engine bay but help to beautify as well. With custom brackets, they will fit most applications with perimeter-bolt valve covers. The billet aluminum wire loom sets are offered in polished or chrome finishes. When dressing up your engine, be sure not to miss a single detail. Add the finishing touch to your engine bay with TSP billet aluminum wire loom sets.
Not Yet Reviewed
$54.32
—
$66.66
TSP premium ignition wires deliver superior performance and durability. A spiral-wound core suppresses RFI (radio-frequency interference) and features 500 ohm-per-foot resistance for outstanding performance. Around the core is a fiberglass braid which provides superior pull strength. The outer jacket is composed of premium high-density silicone rated at 450 degrees F and featuring a quality gloss finish to resist damage from water and chemicals. Increase your vehicle's performance over stock with the Top Street Performance 8.5mm spark plug wire sets designed to fit your application!
Not Yet Reviewed
$98.76
Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.
( 51 )
$85.95
—
$106.95
Dress up your engine compartment and organize your plug wires all in one fell swoop with these Billet Specialties billet wire looms. Their stout aluminum construction showcases a mirror-polished finish and either plain or various machined top designs. Their 2-piece design features adjustable tabs that attach to the base of the valve covers via their mounting bolts.
( 102 )
$109.95
Proform's GM licensed Chevrolet linear wire looms use the valve cover mounting bolts to position them along the valve cover to hold the wires in a neat parallel arrangement. They feature a handsome chrome finish with an epoxy-coated Bowtie emblem that is centrally located for maximum visibility. The wire holders are opened and closed with a patented nylon wedge to permit the chrome tops to have a smooth surface free of screw heads.
( 31 )
$95.95
Stromberg E-Fire High Performance spark plug wires are designed for flathead Ford applications—whether you have a front mount (59A) or top mount (8BA) distributor. Designed to work with both electronic and points-style distributors, E-FIRE plug wires give you strong fire power with high-level RFI/EMI resistance. The spiral-wound, stainless steel suppression core is protected by tough fiberglass reinforcing braid for strength and flexibility. And the 100 percent silicone insulation resists high temperatures, moisture, oil and chemicals, and protects against arcing and voltage leaks. With low 500 Ohm/ft resistance, they get more energy into your plugs. With the Ford flathead engine firmly in mind, Stromberg designed the 90-degree cap terminals and boots to be pre-fitted for smarter 'distributor first' installation. This eliminates the difficult task of trimming front mount wires up close to the radiator where access is limited—and also leaves you free to use the supplied 90-degree spark plug boots or choose your own hot rod terminals. All leads are 7mm diameter, so they fit through your flathead plug wire looms or tubes. They're cut to length, too, with a long coil wire to reach your firewall.
( 3 )
$65.00
Who said high quality and high performance can't be cost effective? Moroso Ultra ignition wire sets are equal to or exceed OEM specifications, depending on the application, without the dealer prices. Moroso has more than 50 years of experience in supplying spark plug wires to the top teams of NASCAR and NHRA, as well as auto manufacturers. These sets are available in different thicknesses and colors, assembled or not, with multiple boot end angles. Some models include high temperature sleeves. Order the ignition wires recommended for your application.
( 53 )
$54.99
—
$98.99
These Moroso Mag-Tune spark plug wires are fully tested to ensure secure termination, electrical conductivity, and dielectric strength. They feature moisture-resistant 100 percent silicone boots and snap-lock spark plug terminals. The Moroso Mag-Tune spark plug wires start with a conductive latex-coated, heavy-duty fiberglass core and then add a spiral-wound stainless nickel alloy conductor over the top. Added to that is a fiberglass reinforcing braid, and they finish the construction with a high-temperature EPDM jacketing.
( 125 )
$50.79
—
$93.99
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 146 )
$49.99
—
$103.99
Motorcraft ignition wire sets meet or exceed original equipment quality specifications. They're made from top-quality materials for lasting performance. The wires are available in multiple diameters and distributor terminal end options. Order the set designed for OE fitment on your vehicle application.
( 31 )
$50.99
—
$72.99
Scott Drake spark plug wire sets are designed to factory specifications to deliver precise fit and finish. These replacements are constructed from top-quality materials, just like the originals, to restore the ignition performance you want from your classic car. Spark plug wire sets are available with different attributes for specific vehicle applications.
( 1 )
$60.65
—
$72.55
R&M billet wire looms use injection-molded insulators anchored to stylish billet aluminum brackets with recessed socket head cap screws to hold your plug wires. Not only does this setup look great, but it also allows you to route your wires away from exhaust heat without worrying about them coming loose. They're made for a variety of engines and are available in a wide range of colors and finishes. Features include: * Quality-machined 1/8 in. billet aluminum * Specifically designed for each application * Heat-resistant, glass-filled polyester, non-conductive clamps included * Limited lifetime warranty
( 502 )
$102.99
—
$107.99
Custom route your plug wires with these universal wire separators from Made For You. They're made from 6-6 Zytel nylon that is guaranteed not to fade, distort, stain, or discolor under normal use. The molded nylon wire separators include stainless steel hardware to securely attach both halves. Their 2-piece design creates a neat, professional, custom look while keeping your plug wires out of high-heat areas.
( 15 )
$55.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
