Availability
Showing In Stock Items. Show All 11 Items.
Made For You horizontal top mount wire looms are made from 6-6 zytel nylon that is guaranteed not to fade, distort, stain, or discolor under normal use. They're designed specifically for 1987 and later Chevy center-bolt valve covers. The looms contain mounting brackets, molded nylon wire separators, and stainless steel mounting hardware. Their innovative design creates a neat, professional, custom look while keeping your plug wires out of high-heat areas.
( 70 )
$60.95
—
$64.95
On Sale
Keep your wires separated with Mr. Gasket wire looms and divider kits. Available in a variety of styles, materials, and finishes, these wire dividers fit 7 and 8mm wires with ease. Whether you're at the strip, cruising the streets, or sitting at a car show, Mr. Gasket wire looms and divider kits will be sure to keep your wires away from your headers and the engine compartment looking clean.
( 38 )
$83.05
R&M billet wire looms use injection-molded insulators anchored to stylish billet aluminum brackets with recessed socket head cap screws to hold your plug wires. Not only does this setup look great, but it also allows you to route your wires away from exhaust heat without worrying about them coming loose. They're made for a variety of engines and are available in a wide range of colors and finishes. Features include: * Quality-machined 1/8 in. billet aluminum * Specifically designed for each application * Heat-resistant, glass-filled polyester, non-conductive clamps included * Limited lifetime warranty
( 502 )
$98.99
Dragon Fire High Performance Series spark plug wire sets deliver industry-leading performance, quality craftsmanship, and long-term reliability. At the core of these wires is a strong Kevlar® center with a low-resistance spiral-wound alloy conductor, tightly wrapped for maximum spark energy transmission up to 80,000 VAC. A high dielectric strength co-polymer compound coating is applied to the conductor to help eliminate voltage leaks and Radio/Electromagnetic Frequency Interference (RFI/EMI). The conductor is fully insulated in a durable, extra-thick silicone and EPDM sleeve for superior protection. All terminals are protected by heavy-duty, extra-thick walled, high-temp silicone boots to ensure optimal spark delivery and long service life. Heat Rated to 600° F. Designed as a direct replacement set, these spark plug wires are heat-rated to 600 degrees F. Order the set recommended for fitment on your vehicle.
( 15 )
$59.95
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 138 )
$64.60
—
$79.55
NGK Resistor spark plug wire sets utilize a construction method known as "variable pitch" wire winding to create resistance to radio frequency interference. They have a lower resistance than conventional carbon core wires, which translates into longer wire life. At the center of each wire is a fiberglass stranded core, made from the same family of materials as those used in bulletproof vests. This core greatly enhances the overall strength of the wire and prevents the pulling strains that wires are often subjected to. The spark plug wires feature custom-designed terminal boots that provide an exact fit—and high-quality EPDM and silicone coverings to resist high temperatures, oil, and chemical damage. Each wire is fitted with a positive-locking, corrosion-resistant, nickel plated terminal end for a tight fit and maximum resistance to vibration and separation. The wires are numbered to correspond to cylinder numbers, and the coil wires are color-coded for a correct and easy installation. Order the Resistor set designed for your vehicle application.
( 106 )
$51.99
—
$76.99
Sierra Marine MAGFORCE ignition wire sets are "electronics friendly". These spark plug wires protect all of your electronic devices and electronic engine controls from radio-frequency interference and electromagnetic interference, while delivering the maximum amount of voltage. Their exact-fit design ensures easy installation and years of trouble-free service. Sierra MAGFORCE ignition wire sets feature: * Moisture-proof, molded distributor insulators * High-quality conductive center carrier * Mag/wire-wound core delivers maximum voltage without RFI and EMI interference * High-tensile strength membrane for added durability and heat resistance * Innovative nylon reinforcing tape for added strength and durability * 8mm high-tear strength silicone jacket protects conductor up to 500 degrees F * High-temperature, pre-greased silicone insulators * Posi-lock stainless steel terminals resist corrosion
( 15 )
$55.99
—
$94.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1949 )
$172.95
$95.95
These aluminum mounting brackets from Taylor Vertex allow you to mount your vertical ignition wire loom kits to your vehicle's heads. Imagine freeing your center bolt valve covers from clutter and gaining access to them without ignition wire interference!
Not Yet Reviewed
$50.90
Dress up your engine compartment and organize your plug wires all in one fell swoop with these Billet Specialties billet wire looms. Their stout aluminum construction showcases a mirror-polished finish and either plain or various machined top designs. Their 2-piece design features adjustable tabs that attach to the base of the valve covers via their mounting bolts.
( 102 )
$109.95
Dress-up your engine and protect your ignition wires with Summit Racing™ aluminum wire looms. They come in a variety of styles and finishes—and include all necessary mounting hardware. The separator/looms fit most 7, 8, or 9mm plug wires.
( 47 )
$63.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
