Availability
Showing In Stock Items. Show All 13 Items.
On Sale
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 245 )
$149.96
—
$337.49
$134.96
—
$303.74
Are you experiencing hard starts, stalling issues, rough idle, or hearing a slight pinging within your engine? Don't panic. It may be related to a bad throttle position sensor. Delphi throttle position sensors are designed to sense throttle movement and change of position. They also regulate various engine and vehicle operations, including spark timing, air and fuel ratio, torque converter lockup, air conditioning, and idle speeds. With that said, throttle position sensors are an important component, and if your existing sensor seems to have gone bad, just swap it out for a new one from Delphi.
( 13 )
$20.99
—
$166.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$12.99
—
$629.99
JMS Chip PedalMAX drive-by-wire boosters install in just minutes and will help erase pedal turbo-lag, as well as increase throttle reaction and improve acceleration. These throttle response enhancers change the way your gas and diesel vehicles respond--with improved low- and mid-range horsepower, torque, and shift feel of your automatic; they also eliminate stalling on manual vehicles when accelerating. These drive-by-wire boosters have a rugged, waterproof design and offer a simple plug-and-play installation. If you hit the pedal for "take-off" but are unhappy with the delay in your stock throttle, these JMS Chip PedalMAX throttle response parts are the solution. Order the booster recommended for your vehicle.
( 56 )
$274.77
—
$289.75
Davies Craig puts you in total control of your engine cooling with their electric water pump and controller combos. These economical packages deliver a selection of choices; all include lightweight EWP pumps that will cool better, while providing more power, torque, and fuel economy. The controller features a prominent blue LCD screen, and has features to manage the efficient operation of both your electric water pump and engine fan—to eliminate "heat soak" and extend the life of your engine. The pumps are available in aluminum alloy or nylon construction, as well as different flow rates to best fit your specific application. Upgrade your belt-driven, mechanical pump and engine thermostat with the improved performance of Davies Craig electric water pump and controller combos.
( 5 )
$378.93
Astemo offers ignition knock sensors for a wide range of vehicles, particularly many import models. These stock replacements are built to OEM specifications for performance and longevity. The knock sensor identifies the high-frequency engine vibrations characteristic of knocking and transmits a signal to the ECU. The aim is to obtain the maximum energy yield by starting ignition as early as possible. Engines with a knock sensor can reduce fuel consumption and increase torque. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the knock sensor model recommended for your application.
Not Yet Reviewed
$44.99
—
$53.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Beck/Arnley vehicle speed sensors. Depending upon your vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air-control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points.
( 1 )
$20.50
—
$143.99
Clearance
Everyone has a need for Digipower SPEED! These throttle response controllers are capable of processing and modifying the signals thrown from the throttle pedal to the ECU. They enable you to achieve an enhanced and safer driving experience, along with improved engine response, limiting the acceleration, and locking the pedal on the anti-theft mode. The controllers are 100 percent plug-and-play, making them quick and safe to install, while allowing you to keep all the stock features when uninstalled. They will not leave residual codes, and SPEED can be reinstalled countless times in vehicles with similar settings. If your phone is supported, with the SPEED app you'll have the ability to control Speed via Bluetooth. Digipower SPEED features include: * Six driving modes: Stock, ECO, Sport, Performance, Track, and Valet * ECO mode: Save up to 15 percent in ECO mode; ensures optimum performance with fuel economy, and decreases the emission of polluting gases into the environment * Sport mode: Improved engine response with more drivability and performance * Performance mode: Maximum performance in your day-to-day commute * Track mode: Immediate response. Intended for off-road use only. Gains can be extreme, depending on application * Valet mode: Accelerator pedal is now governed with a limiter controlling torque and power. No joy rides or burning rubber here. Just enjoy your time because strangers can do no harm in this mode. * Anti-theft (pedal lock): No acceleration response when the driver presses the pedal. The device will act as a blocker and the pedal will only restart by the unlock command from the app. * Return to stock at anytime * Performance increases over stock from 30 to 50 percent in acceleration * Controls easily with a button or a supported app Bluetooth connection * Sensitivity adjustments: More than a 100 settings. By dragging the cursor to the left, the user lowers the pedal sensitivity; drag it to the right, it increases. It is possible to make the Stock, Sport, Performance and Track modes more or less aggressive. On Valet mode, you can customize the engine's torque and power.
( 2 )
$295.00
$149.50
Clearance
RaceChip RX range extenders allow you to experience ultimate driving pleasure and unlock additional range for your electric vehicle. These innovative products make it easier to handle your electric vehicle in everyday life with improved responsiveness, up to 10 percent more range, three individual driving modes, and easy installation. RaceChip RX is a plug and play "brainbox" that attaches between the accelerator pedal sensor and the engine control unit to optimize characteristic curves according to the driving mode selected. RX is controlled through the RaceChip app via your smartphone's Bluetooth or through the optional controller. Signals emitted by the accelerator pedal sensor are adjusted via specially tuned characteristic curves, resulting in a more linear torque demand on the electric motor and increased energy recovery when the accelerator pedal is released. As a result, less energy is lost, and energy recovery is improved during braking; the same battery capacity will cover a longer distance. After mounting and connecting the "brainbox", set up the RaceChip+ app to control the RX, and you're ready to go. RaceChip RX with app control is available with or without RX controller. Select the range extender designed for your EV. RX range extender components: * Brainbox--compact low-height design makes it easy to store and fix in the footwell of your vehicle without impacting driver's legroom. It can be mounted in other locations, such as in existing bays or slots, as well as on smooth surfaces in the vehicle * App control-- lets you choose between the three individual driving modes and adapt the RX to your personal driving style with the touch of a finger using your smartphone * Three driving modes: -- Sport-- Improves responsiveness and enhances driving pleasure. Experience sportier driving behavior and better acceleration in sport mode. -- Comfort-- Adjust the pedal response to your personal driving style and enjoy a higher level of driving comfort. -- Eco- Improve your CO2 footprint. More range and fewer charging stops save money and the environment by saving power and money. * Optional controller--wireless and equipped with a high-quality 1.7 in. LCD touch display allows seamless control of the RaceChip RX directly from the dash. It can be mounted anywhere inside the vehicle's interior, depending on your operating habits or preferences. Compact, elegant design blends perfectly with your vehicle's aesthetics.
Not Yet Reviewed
$259.00
$179.50
Summit Racing™ mass airflow sensors are a great way to increase horsepower and torque. These sensors easily bolt on in place of the OEM unit, and are made from durable aluminum to insulate the incoming air charge from high underhood temperatures. Their state-of-the-art electronics improve ignition and injector control for all-around improved performance.
Not Yet Reviewed
$239.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
