Sensors: Oxygen, Map, Knock Sensor & More

Demon Carburetion TPS Kits

These Demon Carburetion TPS kits are designed for use with electronic transmissions that require a TPS signal. They include a TPS switch, billet bracket, connector rod, and adapter lever. The kits install easily on your Demon Carburetion carburetor with no modifications.

1.0 out of 5 stars ( 1 )

$306.95

RideTech RidePro E5 Ride Height Sensor Kits

RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses

2.0 out of 5 stars ( 1 )

$525.00

Dorman Cylinder Deactivation Manifolds

Dorman offers cylinder deactivation solenoids, a.k.a. CD manifolds, that have been rigorously engineered to directly replace the original equipment on select vehicles. This design features multiple upgrades to help ensure performance and reliability—such as an increased sealing surface interface, a redesigned rod sub-assembly, and superior quality O-rings and gasket. Durably constructed, the solenoid rod is hardened for improved wear resistance and to help maintain tighter tolerances. Internal bore step incorporates a radius edge to prevent valve sticking for reliable operation.

5.0 out of 5 stars ( 1 )

$240.99

Wilwood Floor-Mount 2-Pedal Assemblies

Wilwood has engineered two reverse floor-mount brake pedal assemblies, one with a standard bias adjuster balance bar and the other with a precision Tru-Bar. Both models incorporate an adjustable clutch pedal assembly. Wilwood floor-mount 2-pedal assemblies feature lightweight aluminum frames with high-strength reinforced I-beam style forged pedal arms and stainless steel foot pedal pads. The pedal heads adjust vertically to fine-tune the pedal ratio (5.25:1 to 6.00:1) for more feel or less pedal effort. The non-skid waffled pedal pads can be laterally adjusted for driver preference. A clutch and two brake master cylinders (sold separately) mount to the assemblies with the adjustable balance bar or the friction-free, trunnion-based adjustable Tru-Bar balance bar, providing front-to-rear brake bias fine tuning. Both the balance bar and Tru-Bar incorporate a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Select the Wilwood 2-pedal assembly with the brake pedal option desired. Key features and notes: * Adjustable pedal ratio * Adjustable foot pads * Forged aluminum pedal arms * Adjustable clutch stop * Wilwood's own black e-coat finish * Triple high-strength steel master cylinder mounts -- Traditional flange mounts at a 45-degree angle -- Accommodates three Wilwood compact remote master cylinders (sold separately) * Balance bar utilizes a pin and clevis pushrod attachment system -- Ensures the smallest possible misalignment angle for bind-free operation through the entire range of travel * Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm with spherical rod-end bearing pushrod attachments -- Reduces compliance and friction for more accurate brake feel -- Pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar-style pedals

Not Yet Reviewed

$430.78

—

$659.95

Icon Vehicle Dynamics Rear Upper Link Sensor Brackets

Icon Vehicle Dynamics offers rear upper link sensor brackets for a variety of applications, including select late-model Toyota and Lexus trucks. These kits allow for attachment of the OE rear ride height sensor linkage to the ICON billet or tubular rear upper links. The bracket kits are required for all rear sensor equipped vehicles when installing the ICON's billet or tubular rear upper link kit. Quality stainless steel construction ensures a solid mount to the ICON rear upper links. Additional details: * Suspension ride height sensor connector rod bracket * Compatible with OE sensor links * Laser-cut and CNC-formed stainless steel construction * All mounting hardware included

Not Yet Reviewed

$40.28

Twin Power MAP Sensors

Twin Power MAP sensors are high-quality OEM-style replacements for Harley-Davidson® motorcycles. Order the model recommended for your bike application.

Not Yet Reviewed

$35.84