Availability
FAST fluid temperature sensor and converter kits provide an easy and economical way to measure fluid temperature and convert to a universal 0 to 5 V output, perfect for use with EFI systems and dataloggers. Designed around the widely available GM-style intake fluid temperature sensors, these FAST kits are ideal when trying to measure engine oil, coolant, transmission, intercooler/heat exchanger fluids, and rear differential temperatures. FAST fluid temperature sensor and converter kits come complete with fluid temperature sensor and pre-terminated sensor module, and installation is simple, with only three wires to connect.
( 1 )
$87.95
FuelTech hall effect converters are designed to read an analog VR signal and transform init to a digital signal (Hall). This is recommended when using VR speed sensors (found in most ABS systems) or when using VR fuel flow meters. (Note: Not compatible with differential hall-effect or magneto-resistive sensors.)
Not Yet Reviewed
$89.00
Summit Racing™ MAP sensor adapters enable you to use a Holley LS2 harness with LS3 engines. These adapters feature pre-terminated connectors and wiring for a direct plug-and-play installation.
( 4 )
$28.99
Caspers Electronics MAP sensor harness adapters make change happen--easily! Whether you want to convert your LS1/LS2 to an LS3/LS9 MAP, adapt to early or late models, or use the factory sensor location under the hood for your XFI/Fast to GN adapters, Caspers offers a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly.
( 3 )
$24.79
ICT Billet MAP sensor harness adapters make change happen—easily! They offer a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly. ICT Billet wire adapter harnesses are assembled with OEM tooling, connectors, lock seals, and terminals, and utilize factory harness wire colors. They're available in WeatherPack, Bosch, Delphi/GM, and Metri-pack connector styles for use on many Chevrolet small block LS-based engine applications from 1997 and up.
( 3 )
$43.99
Top Street Performance MAP sensor harness adapters allow LS1 and LS2 engines to run the later LS3 MAP sensor. These premium harness adapters provide an easy plug-and-play installation without having to cut and splice into the factory harness. Complete your Velocity intake set-up the easy way! Order a MAP sensor harness adapter from Top Street Performance.
Not Yet Reviewed
$29.62
aFe Sprint Boosters offer your ride an adrenaline kick! Designed for ETC systems, or drive-by-wire, these simple-to-install power modules plug into the OE connector located behind the accelerator pedal--no wires to cut. aFe Sprint Boosters deliver improved acceleration and reduce throttle response time. They will not affect your vehicle's electronic system and offer three settings for better drivability: factory (off), sport (green), and race (red). Raise the performance level of your ride with aFe Sprint Boosters.
( 20 )
$311.85
JMS Chip ThrottleMax throttle body swap controllers allow you to convert your Mustang's digital throttle body to an analog style throttle body. These kits include the wiring harness as well as the controller to make for an easy conversion.
( 1 )
$399.75
Lingenfelter map sensor harness adapters are plug-and-play connectors that will allow the installation of an LS3 MAP sensor in a LS2 or LS1-equipped vehicle.
( 3 )
$28.45
Dorman exhaust gas temperature sensors make replacing seized or damaged sensors a breeze. These EGT sensors are direct replacements and come with a bung repair kit just in case the bung is damaged during removal. This is a cost effective fix, instead of having to replace the entire exhaust pipe. They feature quality engineering and are backed by decades of automotive experience.
Not Yet Reviewed
$49.99
—
$116.99
Are you in need of an air-fuel-ratio monitor kit for your HP Tuned vehicle? Measure your AFRs with extreme precision using Ballenger Motorsports' AFR500v3 wideband control kits preconfigured specifically for vehicles using HP Tuners' software. As one of the most critical tools a tuner requires for properly calibrating a vehicle, the AFR500 air fuel ratio monitor provides professional grade measurement of air-fuel-ratio without breaking the bank. Ballenger AFR500v3 kits offer a linear analog output to be used as an input to engine control systems, gauges, or data acquisition systems. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. Key features and benefits: * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Display gasoline (standard) * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Digitally derived output with a higher resolution digital/analog converter * 4 times the measurement resolution (4096 increments compared to the previous 1024) * ASIC chips (a common point of failure from electrostatic damage) have been replaced with a custom board providing better protection and upgrade capabilities * Ability to display from 0.0 to 6.0 in lambda setting for better flexibility with alternate fuels, such as diesel * Ability to upgrade firmware for future sensor types * All harnesses, control units, accessories, etc. are backward and forward-compatible * Options are selectable at any time via internal jumpers * NTK Calibration grade sensor highly recommended for low AFR methanol applications
Not Yet Reviewed
$549.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$23.50
—
$547.99
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$15.99
—
$955.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$24.99
—
$71.99
Are you experiencing hard starts, stalling issues, rough idle, or hearing a slight pinging within your engine? Don't panic. It may be related to a bad throttle position sensor. Delphi throttle position sensors are designed to sense throttle movement and change of position. They also regulate various engine and vehicle operations, including spark timing, air and fuel ratio, torque converter lockup, air conditioning, and idle speeds. With that said, throttle position sensors are an important component, and if your existing sensor seems to have gone bad, just swap it out for a new one from Delphi.
( 13 )
$20.99
—
$166.99
Top Street Performance MAP sensor extension harnesses help you complete your Velocity intake set-up. They convert an LS1/LS2-style MAP sensor to the later LS3-style. The harness works with Gen IV MAP sensors found in LS3, LS9, LSA, and Top Street Velocity intake manifold applications.
( 1 )
$29.62
Rostra vehicle speed sensors are speed signal generators that will help you convert to the signal type that you need. The GM sensors include a wiring harness, a GM cable adapter, and a sensor adapter. The universal sensors include a wiring harness and a magnetic pickup to provide a usable speed sense signal.
( 35 )
$58.99
—
$163.99
Clearance
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$208.99
$49.99
—
$572.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$6.99
—
$884.99
MAP (Manifold Absolute Pressure) sensors which fail may cause the engine to have a too rich or lean fuel mixture condition. Crown Automotive MAP sensors restore data transmission to regulate timing control and fuel delivery. They convert engine vacuum/manifold pressure to an electrical signal so that the computer knows how much load the engine is under. This data is the basis for calculating values which keep your vehicle in top running order.
( 4 )
$16.99
—
$46.99
Avoid conductivity issues that can cause your engine to run poorly and be difficult to diagnose. ICT Billet MAF/IAT breakout harnesses are assembled with OEM tooling and use OEM harness wire colors, as well as OEM Delphi connector, lock, seals, and terminals. ICT Billet MAF/IAT harnesses are offer in different styles for retaining MAF in factory position while breaking (relocating) IAT sensor to different location, converting small 3-wire MAF to larger 5-wire MAF/IAT sensor, or when you need more length when relocating intake/air filter to opposite side of engine from factory harness and IAT is relocated external to the MAF sensor. Choose the one that meets your "breaking" needs.
Not Yet Reviewed
$65.99
On Sale
Injen X-Pedal Pro Black Edition throttle controllers are the next step in customizable throttle response controllers. Quickly and easily tune out the delayed throttle response from the factory for a completely new driving experience. You'll be amazed how different your vehicle feels after this quick and simple install. Modern vehicles are infamous for a sluggish and delayed throttle response feel directly from the factory. You'll recognize this built-in delay when trying to accelerate to pass another vehicle or merging into traffic. Injen X-Pedal Pro Black Edition throttle controllers let you adjust the pedal feel and ultimately the throttle response of your vehicle directly on-the-fly. The controllers require less than five minutes to install and deliver immediate, customized performance for your vehicle. Order the kit recommended for your vehicle. Features and benefits include: * Works with performance upgrades * Mode memory * No wires to cut or holes to drill; it's literally a plug-and-play unit * Lock the throttle * Built-in high-speed processor greatly improves throttle signal * Sport Mode: 9 levels, suitable for mountain roads and racing * ECO Mode: 7 levels, suitable for driving in city areas which can improve fuel economy * Anti-skid function allows your vehicle to launch on lower friction surfaces with ease * Launch Control/Drag Race Mode: Lets you reach max acceleration faster * DAC (Digital to Analog Convert
( 8 )
$243.75
$195.00
Are you having problems with your electronic throttle? If so, then pick up one of these Dorman accelerator pedal position sensors. They are designed to indicate the position of the accelerator pedal by converting the accelerator pedal movement into two electrical signals so that the computer can provide the proper change in throttle position. Available for a variety of vehicles, the Dorman accelerator pedal position sensors are sure to solve any of your electronic throttle issues.
( 16 )
$46.95
—
$371.99
Caspers Electronics MAF harness adapters are plug-and-play adapters that convert the 3-wire LT1 engine harness connectors to plug directly into the 5-wire LS1 MAF sensors. They incorporate AirTemp connectors into the adapters to connect directly to the gray AirTemp sensor connectors from the engine harness.
( 3 )
$32.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
