Availability
Chevrolet Performance individual bolts are offered to replace your missing or damaged automotive bolts. They can be used in multiple applications and are available in a variety of sizes, materials, and finishes. Keep some bolts from Chevrolet Performance on hand.
( 2 )
$6.99
ICT Billet LS idle air control valve and throttle position sensor bolt kits are application-specific for use in mounting the TPS and IAC to the throttle body on LS style engines. These replacement kits consist of two each: M4-12mm and M4-8mm bolts, and four washers to facilitate installation. They fit 1997-2014 GM LS series engines.
( 2 )
$17.99
ICT Billet LS crankshaft and camshaft sensors bolt kits facilitate installation—or update aging hardware during maintenance. These complete kits include one 6mm bolt and four 8mm fasteners for various GM LS applications.
Not Yet Reviewed
$17.99
Summit Racing™ idle air control valve and throttle position sensor bolt kits are application-specific for use in mounting the TPS and IAC to the throttle body on LS-style engines. These replacement kits consist of two each: M4-12mm and M4-8mm bolts, and four washers to facilitate installation. They fit 1997-2014 GM LS Series engines.
( 7 )
$2.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$74.99
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$10.99
—
$88.99
Hella mass airflow sensors will correctly calculate the intake air mass in your internal combustion engine. The efficient running of your engine depends on several things, and these sensors are one of those important parts. They are quality-built, direct replacements for your malfunctioning or damaged mass airflow sensors. The amount of electronic components in vehicles is constantly growing, and Hella is ready to help you service them to keep your vehicle properly maintained for the road ahead.
Not Yet Reviewed
$138.99
—
$354.99
Haltech wideband hardware packs include the oxygen sensor, adapter harness, and weld-in bung to plug-and-play with a Nexus Series harness. Select the pack for LSU 4.9 or NTK.
Not Yet Reviewed
$180.00
—
$215.00
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement wideband oxygen sensors are built to fit and function just like the originals. They're designed for use with a wideband controller or gauge. The 02 sensors are available in different models: * Model 010712: Modified NTK LZA08-H5 Suits NEXUS Series devices and used with NTK compatible wideband controllers to measure Lambda Notes: Genuine NTK sensor modified by Haltech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip. * Model 010714: Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector * Model 010718: Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with factory calibration resistor connector (not a Deutsch DT-6 connector)
( 1 )
$180.00
Crown Automotive air temperature sensors are replacement parts which gauge the temperature of the incoming air to the engine. This information is provided to calculate the correct amount of fuel needed for proper economy and performance. When your sensors become damaged or less effective, even those of you not mechanically inclined will find that you can install these sensors easily. Crown makes them to OE specifications for fit, function, and form.
( 2 )
$30.99
Don't take chances with an old, questionable, or malfunctioning knock sensor that diminishes your vehicle's fuel economy, or worse, your engine. The engine knock sensors play a dual role in helping to monitor and protect your engine. Like other sensors, knock sensors monitor engine operation to optimize performance. In addition, knock sensors protect the engine against power-robbing and potentially destructive engine knock. Standard Motor Products replacement knock sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Performance.
( 12 )
$38.99
Artec Industries ABS reluctor rings provide your on-board computer with correct data from the anti-lock braking system, eliminating codes and limp mode issues. These tone rings are made from quality steel and available in a range of tooth sizes to fit a variety of models. They're built specially for the axle swap applications on your Jeep JK.
Not Yet Reviewed
$54.99
—
$98.99
Don't take chances with old, questionable, or faulty intake air temperature sensors that can send misleading information to you and your vehicle's computer. Standard Motor Products offers replacements designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These intake air temperature sensors are available for a wide range of makes and models, and some units also include a wiring harness. Trust your vehicle's electrical system needs to Standard Motor Performance.
( 11 )
$66.99
Holley drive-by-wire accelerator pedals perfect complements to any vehicle using DBW. They offer plug-and-play compatibility with Holley EFI and simply bolt into the stock locations when used with Holley's DBW pedal brackets (sold separately). Features: * Simplifies engine swaps with DBW accelerator systems * Works great with Holley EFI installation * Provides modern look and performance for classic vehicles * Fits in OE location when used with Holley DBW pedal brackets
( 1 )
$149.95
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
Mount your mass airflow sensor with ICT Billet mounting flanges. Designed to be welded, they are radius-cut on the bottom to accept 4 in. pipe. They include mounting bolts, and of course, they are all manufactured from aerospace-grade 6061 billet aluminum.
( 6 )
$29.99
—
$289.99
Summit Racing™ mass airflow sensor mounting flanges are weldable and radiused on the bottom. They are manufactured from aluminum and include steel bolts. Mount your mass airflow sensor with Summit Racing™ mounting flanges.
Not Yet Reviewed
$15.99
Summit Racing™ Easy O2 sensor mounts simplify the addition of wideband to your car! Not a welder? No problem--our 304 stainless steel oxygen sensor mounts are easy to install. Simply drill a hole in the exhaust, install the gasket, and bolt the clamp—no welding is necessary! Add O2 sensors with our no-hassle Summit Racing™ Easy O2 sensor mounts, available for a variety of pipe diameters.
( 55 )
$43.99
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These Genuine Bosch knock sensors use a 5/16 in. mounting bolt, and include matching plug and two pins. Knock sensors detect pre-ignition and detonation, an irregular knocking vibration of the engine which could potentially be damaging. Sensors are in place to contribute to the improvement and fuel economy of engine performance.
Not Yet Reviewed
$80.00
—
$110.00
AEM Electronics No-Weld O2 sensor mounts enable users to mount a wideband O2 sensor without having to weld a sensor bung onto the exhaust. This is especially helpful for those that don't know how to weld or can't find someone that does. Simply drill a hole in the exhaust, install the gasket, and bolt the clamp. It's that easy!
( 23 )
$66.45
FAST throttle position sensors are designed to bolt onto the throttle blade shaft and relay throttle opening/closing information to the system ECU. These throttle position sensors are constructed from highly conductive, plastic-resistance material with a "sensitive" rotator for accurate throttle position measurement.
( 4 )
$49.95
—
$80.95
Summit Racing™ mass airflow sensors are a great way to increase horsepower and torque. These sensors easily bolt on in place of the OEM unit, and are made from durable aluminum to insulate the incoming air charge from high underhood temperatures. Their state-of-the-art electronics improve ignition and injector control for all-around improved performance.
Not Yet Reviewed
$239.99
There'll be no more pegging for your Ford with SCT Big Air 5000 slot-style mass air meters. These direct bolt-on replacements feature OEM-quality calibration for factory-level drivability, repeat accuracy, and reliability. Are you adding power? Don't forget about your stock MAF meter--it won't be able to handle it! Go with add-on performance from SCT and their Big Air 5000 Ford slot-style mass air meters.
( 4 )
$269.00
Granatelli Motor Sports slot-style mass airflow sensors have been calibrated on their in-house MAF dyno and flow bench to optimize performance for your specific application. Designed to help you improve your mileage and throttle response, they also improve your overall performance from 2,000 rpm to redline without voiding your factory warranty. Granatelli Motor Sports slot-style mass airflow sensors can be installed in 10 to 15 minutes with basic hand tools and are compatible with most electronics and aftermarket bolt-on performance equipment.
( 7 )
$225.19
—
$355.06
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
