Availability
Showing In Stock Items. Show All 46 Items.
Holley drive-by-wire accelerator pedals perfect complements to any vehicle using DBW. They offer plug-and-play compatibility with Holley EFI and simply bolt into the stock locations when used with Holley's DBW pedal brackets (sold separately). Features: * Simplifies engine swaps with DBW accelerator systems * Works great with Holley EFI installation * Provides modern look and performance for classic vehicles * Fits in OE location when used with Holley DBW pedal brackets
( 1 )
$152.95
Wilwood has engineered two reverse floor-mount brake pedal assemblies, one with a standard bias adjuster balance bar and the other with a precision Tru-Bar. Both models incorporate an adjustable clutch pedal assembly. Wilwood floor-mount 2-pedal assemblies feature lightweight aluminum frames with high-strength reinforced I-beam style forged pedal arms and stainless steel foot pedal pads. The pedal heads adjust vertically to fine-tune the pedal ratio (5.25:1 to 6.00:1) for more feel or less pedal effort. The non-skid waffled pedal pads can be laterally adjusted for driver preference. A clutch and two brake master cylinders (sold separately) mount to the assemblies with the adjustable balance bar or the friction-free, trunnion-based adjustable Tru-Bar balance bar, providing front-to-rear brake bias fine tuning. Both the balance bar and Tru-Bar incorporate a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Select the Wilwood 2-pedal assembly with the brake pedal option desired. Key features and notes: * Adjustable pedal ratio * Adjustable foot pads * Forged aluminum pedal arms * Adjustable clutch stop * Wilwood's own black e-coat finish * Triple high-strength steel master cylinder mounts -- Traditional flange mounts at a 45-degree angle -- Accommodates three Wilwood compact remote master cylinders (sold separately) * Balance bar utilizes a pin and clevis pushrod attachment system -- Ensures the smallest possible misalignment angle for bind-free operation through the entire range of travel * Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm with spherical rod-end bearing pushrod attachments -- Reduces compliance and friction for more accurate brake feel -- Pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar-style pedals
Not Yet Reviewed
$430.78
—
$659.95
Lokar drive-by-wire electronic throttle controls are the first programmable electronic throttle controls for the automotive aftermarket. These billet aluminum controls feature a non-contact, solid-state Hall effect sensor and are available, pre-programmed, from the factory for most GM, Ford, and Mopar applications. These controls are programmed to optimize electrical output for quicker throttle response, producing no pedal lag and three times the performance of OEM pedals. They also offer improved operator control and pedal stability over rough terrain making them ideal for high performance and off-road applications. The controls include an application-specific pedal wiring harness that works in conjunction with the OEM or aftermarket EFI wiring harnesses. These Lokar electronic throttle controls are available with a brite or black anodized finish and are designed for use with one of Lokar's drive-by-wire pedal assemblies which are sold separately and available in a variety of styles and finishes to match your custom application.
( 8 )
$594.95
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
An unresponsive accelerator pedal along with a check engine light is bad news and leaves your Jeep undrivable. Crown Automotive accelerator pedal assemblies include the pedal position sensor, so you can get back on the road safely. They are direct replacements offering the proper fit and performance, matching that of the originals. Hit the gas with Crown accelerator pedal assemblies.
Not Yet Reviewed
$120.99
FiTech oxygen sensor bung assemblies offer a no-weld installation. Oxygen sensors are vital components that help you adjust to your engine's fuel/air ratio via the electronic control unit (ECU). With these easy-to-install kits, you're on your way to improved performance. Simply drill a hole in your exhaust, install the gasket and sensor fitting, and then secure with the band clamps. Voila! Now you can install an oxygen sensor without welding in a bung, thanks to FiTech.
( 24 )
$21.00
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$66.99
—
$388.99
ACDelco accelerator pedal sensors will help to restore consistent engine response when you depress the gas pedal. The sensors are exact replacement parts offering the correct fit and function to keep your vehicle moving. Value and peace of mind is installed with all AC Delco's quality-built accelerator pedal sensors.
Not Yet Reviewed
$87.99
Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.
( 100 )
$108.99
—
$600.99
Dorman crankcase pressure sensors are designed to match the fit and function of the original sensor on specified vehicles, and each one is engineered for reliable performance. With durable construction and trustworthy quality, these Dorman direct replacements offer the ideal solution for replacement of the original sensor that has failed due to fatigue or electrical malfunction. Choose the proper one for your vehicle.
Not Yet Reviewed
$56.99
—
$65.99
Are you having problems with your electronic throttle? If so, then pick up one of these Dorman accelerator pedal position sensors. They are designed to indicate the position of the accelerator pedal by converting the accelerator pedal movement into two electrical signals so that the computer can provide the proper change in throttle position. Available for a variety of vehicles, the Dorman accelerator pedal position sensors are sure to solve any of your electronic throttle issues.
( 16 )
$50.99
—
$227.99
Accelerator Pedal Position Sensor (APPS) failure may cause a vehicle to dangerously drop speed while operating on the road. NTK accelerator pedal position sensors deliver the correct fit and function to restore safe, efficient driving. They provide the ECM with two DC voltage signals that change as the position of the accelerator pedal changes, and are the exact original equipment design, incorporating the circuitry specified by OEMs with the sensor element, ensuring consistency in signal output. Select the NTK sensor designed for your vehicle.
Not Yet Reviewed
$174.99
ICT Billet MAP sensor harness adapters make change happen—easily! They offer a selection of pre-terminated manifold absolute pressure sensor adapters to get you plugged in properly. ICT Billet wire adapter harnesses are assembled with OEM tooling, connectors, lock seals, and terminals, and utilize factory harness wire colors. They're available in WeatherPack, Bosch, Delphi/GM, and Metri-pack connector styles for use on many Chevrolet small block LS-based engine applications from 1997 and up.
( 3 )
$43.99
Fleece Performance offers fan extension harnesses for a wide range of vehicles, including late model Chevrolet and GMC trucks. These factory-style replacements allow you to repair a broken or damaged harness without replacing the entire fan and clutch assembly. The harnesses are mounted to the fam assembly and connect to the fan and chassis harness. Fully automated in-house cutting and terminal crimping ensure you get the highest quality parts needed to get your truck back on the road quickly. Order the harness recommended for your fan clutch model.
( 1 )
$45.99
—
$49.99
Lingenfelter Performance Engineering mass airflow sensors are large-diameter and low-restriction. These assemblies will provide accurate airflow--even at high power levels. Recommended for supercharged, turbocharged, and other high output engine applications, these 100mm tube MAFs are precision CNC-machined from aluminum, and then anodized black for durability and appearance. Replace your GM frequency-type sensor with Lingenfelter mass airflow sensors.
( 1 )
$332.45
Does some custom exhaust work require you to relocate your oxygen sensors? Then Kooks Headers oxygen sensor harnesses are just for you. They're available in several different lengths and for various applications. These harnesses are also assembled from high-quality components to meet or exceed OEM specifications. For an easy, hassle-free installation on your next exhaust project, choose Kooks oxygen sensor harnesses.
( 8 )
$27.68
—
$110.38
ICT Billet crankshaft position sensor harness adapters are assembled using OEM tooling, OEM Delphi connector and terminals, and USA-made, factory-color OEM-grade TXL wire. They also have the OEM audible "click" when the connector is attached to the harness, just like factory. Pass up poor quality connectors that may leave you with connectivity issues and poor engine performance. Choose genuine ICT Billet crankshaft position sensor harness adapters that are computer tested for accuracy, ensuring a reliable fit and performance. Select the proper harness adapter to mate your sensor and harness.
Not Yet Reviewed
$43.99
Avoid conductivity issues that can cause your engine to run poorly and be difficult to diagnose. ICT Billet MAF/IAT breakout harnesses are assembled with OEM tooling and use OEM harness wire colors, as well as OEM Delphi connector, lock, seals, and terminals. ICT Billet MAF/IAT harnesses are offer in different styles for retaining MAF in factory position while breaking (relocating) IAT sensor to different location, converting small 3-wire MAF to larger 5-wire MAF/IAT sensor, or when you need more length when relocating intake/air filter to opposite side of engine from factory harness and IAT is relocated external to the MAF sensor. Choose the one that meets your "breaking" needs.
Not Yet Reviewed
$65.99
Twin Power crankshaft position sensors provide an exact OEM fit and function. Being stuck on the side the road is not fun. These sensors are endurance tested to 60,000 miles to ensure sensor longevity, as well as 100 tested to OEM specifications and assembled with OEM-style connectors. Your motorcycle's crankshaft position sensor is one of the most important parts—without it, your bike will not run. Trust Twin Power to keep your Harley® on the road with their sensors.
( 2 )
$51.36
Crown Automotive oxygen sensors make modern electronic fuel injection and emission control possible. They help determine—in real time—if the air/fuel ratio of a combustion engine is rich or lean. If your sensor functions fail and testing confirms that your unit is faulty, simply order the Crown replacement compatible with your Jeep, Chrysler, Plymouth, or Dodge vehicle. These components are assembled from the finest grade materials and are always field-tested to ensure quality performance.
( 4 )
$36.99
—
$107.99
Dorman water-in-fuel sensors are quality replacements that match the function and performance of the original equipment sensor to prevent water damaging a diesel fuel injector. Made of top-grade materials, the WiF sensors have undergone extensive testing to ensure durability and withstand exposure to diesel fuel. They are available as sensors, assemblies, and units with separator or drain valves. For cost-effective solutions for your vehicle maintenance and/or repairs, choose Dorman—original equipment quality at a more affordable price.
Not Yet Reviewed
$28.99
—
$86.99
Clearance
Caspers Electronics air/fuel pigtails allow aftermarket air-fuel gauges to be added to your current front oxygen sensor signal, with complete plug-in capability. The signal wire exits the plug-in assembly and allows the addition of wire to your gauge. Choose from flat or square styles to suit your automotive needs.
Not Yet Reviewed
$21.39
—
$25.99
$13.50
Standard Motor water in fuel sensors are engineered for precision fit, performance, durability, and a long service life. As a global manufacturer, Standard Motor Products has complete control of the manufacturing process from componentry to finished product. Their manufacturing process includes extensive use of robotics for precision assembly, with 100 percent product in-line and end-of-line inspection, from raw material to packaging of the finished product. These direct-fit OE replacements ensure proper fit and performance. Order the fuel/water separator sensor recommended for your application.
Not Yet Reviewed
$187.99
—
$276.99
Clearance
Aisin ride height sensors are vehicle specific, featuring OE form, fit, and function. They are built using Aisin's original equipment technology and know-how to ensure top-notch product quality and reliability for every application. Each one is ready to install with no modifications required. Additional features of Aisin ride height sensors include: * Assemblies include sensor and linkage arm (adjustable or non-adjustable, depending on application) * Sends continuous electric signals to the computer * Maintains correct headlight alignment and suspension height (varies with make and model)
Not Yet Reviewed
$118.99
$68.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
