Availability
Showing In Stock Items. Show All 166 Items.
AEM Electronics offers a variety of replacement parts—including these harnesses for X-Series wideband with oxygen sensor gauges. They provide plenty of length for routing where necessary.
Not Yet Reviewed
$33.74
Standard Motor T-Series crankshaft position sensors will keep your engine firing in the proper order. They send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. These sensors are manufactured from quality materials to provide the service, along with value, that you need. If you're experiencing crankshaft position sensor failure, order the T-Series replacement designed for your specific car, truck, van, or Jeep.
Not Yet Reviewed
$10.99
—
$44.99
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Its offerings represent two-thirds of the total engine management line and the parts are an ideal fit whenever a commercially acceptable product is called for. Standard Motor T-Series air charge temperature sensors (ACT, also referred to as MAT or IAT) measure the air temperature entering the engine and sends this information to your vehicle's PCM. They offer high-quality materials to ensure durability, a direct-fit replacement for ease of installation, and testing for performance and reliability. Choose the value and quality of Standard's T-Series to service your vehicle.
Not Yet Reviewed
$16.99
Standard Motor Products T-Series replacement coolant temperature sensors are designed to meet the original equipment form, fit, and function. How well your vehicle performs depends on its coolant temperature sensor, so Standard T-Series sensors are manufactured from high-quality materials for dependability. If your check engine light is on, it could be to a faulty coolant temperature sensor. If that's the case, simply replace the worn, corroded coolant temperature sensor with a new ones from Standard Motor Products.
( 1 )
$5.99
—
$17.99
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series EGR valve position sensors offer high-quality materials and components for dependability in accurately monitoring the position of the exhaust gas recirculation valve. Choose the value and quality of Standard's T-Series to service your vehicle.
Not Yet Reviewed
$28.99
If your ride is equipped with a faulty engine camshaft position sensor, replace it with a new one from Standard Motor Products. These camshaft position sensors read the location of the cam and pistons so that your spark plug knows when to fire. Standard Motor Products T- Series replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.
( 1 )
$13.99
—
$25.99
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series knock sensors play a dual role in helping to monitor and protect your engine. They offer high-quality materials to ensure durability, a direct-fit replacement for ease of installation, and testing for performance and reliability. Choose the value and quality of Standard's T-Series to service your vehicle.
( 2 )
$23.99
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Its offerings represent two-thirds of the total engine management line and the parts are an ideal fit whenever a commercially acceptable product is called for. Standard Motor T-Series ABS speed sensors supply information regarding wheel movement to the ABS computer. They offer high-quality materials to ensure durability, a direct-fit replacement for ease of installation, and testing for performance and reliability. Features: * OE-matching Hall sensor signal ensures optimum performance * Fiberglass-filled thermoplastic Hall sensor covering withstands heat stress for extended durability and longevity * FPM O-ring protects against leaks to ensure long service life
Not Yet Reviewed
$9.99
—
$49.99
Standard T-Series is a competitively priced line containing some of the most popular part numbers to help you meet your needs. Standard Motor T-Series MAP sensors restore the ability to gain correct measurements of pressure inside your intake manifold. They offer high-quality materials to ensure durability, a direct-fit replacement for ease of installation, and testing for performance and reliability. Choose the value and quality of Standard's T-Series to service your vehicle.
( 1 )
$43.99
ICT Billet offers MAF (mass airflow) harness extensions in a variety of lengths and configurations. They're made with OEM tooling, OEM Delphi connector, lock seals, and terminals—and utilize factory harness wire colors. Don't chance a poorly running engine due to cheap wire connectors; choose the quality of ICT Billet MAF harness extensions.
Not Yet Reviewed
$43.99
—
$78.99
Free your IAT from the heat with Caspers Electronics MAF/IAT breakout harnesses. They are easy-to-install and allow you to move your IAT sensor to a cooler location for a more accurate temperature reading and improved drivability. Relocate your IAT with Caspers Electronics breakout harnesses.
( 13 )
$23.79
—
$24.79
Granatelli offers innovative mass airflow sensors as an upgrade for your stock MAF. The sensors feature state-of-the-art hybrid electronics, which provide improved ignition and injector timing control that results in a 10 to 15 hp gain at the rear tires. They're easy to install and housed in a rugged, injection-molded body to reduce heat soak, which is a common problem with stock metal sensors.
( 6 )
$491.22
—
$500.65
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 239 )
$322.46
Just like you, the staff at AEM frequently race. They buy and install parts, too—and they don't like to compromise. So, if the cables or sensors for your AEM Performance electronics gauge become damaged, AEM Electronics gauge power harnesses are offered to restore both their digital and analog-style gauges to full function. Order the replacement recommended for your original part.
( 1 )
$20.66
Chevrolet Performance MAP sensors are high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes--and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. The MAP sensors are available to fit most GM engines, including the LS Series. They're built from factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$39.99
—
$72.99
HalTech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles
( 2 )
$375.00
—
$550.00
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement wideband oxygen sensors are built to fit and function just like the originals. They're designed for use with a wideband controller or gauge. The 02 sensors are available in different models: * Model 010712: Modified NTK LZA08-H5 Suits NEXUS Series devices and used with NTK compatible wideband controllers to measure Lambda Notes: Genuine NTK sensor modified by HalTech to improve sensor longevity and accuracy at extremely rich air to fuel ratios by the addition of a thin walled spring steel radial shroud at the sensor tip. * Model 010714: Bosch LSU 4.2 Includes: Pre-terminated with female Deutsch DT-6 connector * Model 010718: Bosch LSU 4.9 Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with factory calibration resistor connector (not a Deutsch DT-6 connector)
( 1 )
$130.00
—
$144.00
Summit Racing™ offers high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes—and the computer uses this information to measure engine load so that the ignition timing can be advanced or slowed as needed. The World's Speed Shop® designed these devices to fit most GM engines, including the LS Series. Summit Racing Equipment® MAP Sensors feature factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$36.99
HalTech Dual Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. * Suits: Bosch LSU 4.9 Sensor * Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, 2 Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
Not Yet Reviewed
$550.00
HalTech wideband hardware packs include the oxygen sensor, adapter harness, and weld-in bung to plug-and-play with a Nexus Series harness. Select the pack for LSU 4.9 or NTK.
Not Yet Reviewed
$180.00
ICT Billet LS idle air control valve and throttle position sensor bolt kits are application-specific for use in mounting the TPS and IAC to the throttle body on LS style engines. These replacement kits consist of two each: M4-12mm and M4-8mm bolts, and four washers to facilitate installation. They fit 1997-2014 GM LS series engines.
( 2 )
$17.99
Summit Racing™ idle air control valve and throttle position sensor bolt kits are application-specific for use in mounting the TPS and IAC to the throttle body on LS-style engines. These replacement kits consist of two each: M4-12mm and M4-8mm bolts, and four washers to facilitate installation. They fit 1997-2014 GM LS Series engines.
( 7 )
$2.99
HalTech wideband adapter harnesses are used to integrate wideband sensors to your Nexus Series harnesses and ECUs. The adapter harnesses are terminated with a DTM6 plug to either a Bosch LSU 4.9 or NTK connector. The flying lead adapter harness is terminated with a DTM6 receptacle to AMP Superseal pins and should be used in conjunction with the HalTech LSU 4.9 or NTK adapter harness and hardware packs. Select the correct harness(es) to suit your wideband sensor and Nexus device.
Not Yet Reviewed
$31.00
AEM Electronics cam angle sensor discs are 24-tooth direct replacements for the factory CAS discs and may be necessary with some Series 1 or 2 EMS when you need to run a different CAS. Before purchasing, be sure that the center of the AEM CAS disc looks exactly like the stock disc in your distributor, and match the hubs of your disc to your AEM disc before ordering.
( 1 )
$54.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
