Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Sensors: Oxygen, Map, Knock Sensor & More
Flaming River Microsteer Speed Sensors
Flaming River Microsteer universal Electric Power Assisted Steering systems can be easily fitted to virtually any vehicle, without the need to change steering rack or fit a hydraulic system where manual steering currently exists. However, Flaming River Microsteer speed sensors are necessary for use with manual systems that do not have a speed signal present that can be used for the speed sensitive setup.
Not Yet Reviewed
$198.99
Canton Racing Accusump EPC Conversion Kits
So, you wish you had surge control with your Accusump pre-oiling electric valve? Now you can with Canton Racing Accusump EPC conversion kits. These EPC conversion kits allow you the convenience of an electric valve with the rapid refill rate of the manual valve needed for racing. The electric pressure control valves permit automatic charge and discharge as needed to maintain oil pressure during cornering, acceleration, and braking. Prelubing your engine components is important and so is being ready for that next oil surge to keep you in the race.
Not Yet Reviewed
$98.00
On Sale
Hooker Clamp-On Oxygen Sensor Bungs
More simplistic EFI systems have made conversions extremely popular, but adding the sensor often means making major changes to your exhaust system. Hooker clamp-on oxygen sensor bungs are designed to work with your current exhaust for an easy installation. Drill an appropriate size hole in the indicated location, clamp on the 304 stainless steel bung, and install the sensor. Simplify EFI conversions with Hooker clamp-on oxygen sensor bungs.
( 30 )
$51.19
$46.07
—
$51.19
Caspers Electronics Camshaft Position Sensor Adapter Harnesses
Caspers Electronics camshaft position sensor adapter harnesses allow the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connection located at the back of the intake manifold. These harnesses are perfect for LS2 motor conversions—and are compatible with the PCM harness in LS1 Corvette and F-Body cars. They are fully plug-and-play with factory connector and sensor. The high-temperature nylon loom remains flexible, while not melting sitting on top of the motor.
( 7 )
$29.79
Caspers Electronics Knock Sensor Wiring Harnesses with LS1 Cam Sensor Adapter
Caspers Electronics knock sensor wiring harnesses with LS1 cam sensor adapter allow the cam sensor used on the front of an LS2/3/4/7/9 engine to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. They are ideal for LS2/3/4/7/9 motor conversions and are compatible with the PCM harness in LS1/LS6 vehicles. Additionally, they include a knock sensor extension, which allows the single-wire LS1 knock sensors located on top of the LS1 manifold to be relocated on both sides of the LS2-series block, using the factory LS1 engine harness. The Caspers Electronics knock sensor wiring harnesses with LS1 cam sensor adapter have the correct length and thermal protection required when routing near hot engine components.
( 5 )
$55.99
FAST EFI Sensor Kits
You don't have to be intimidated when changing over from a carbureted system to electronic fuel injection. These FAST EFI sensor kits provide you with everything you need to make the conversion. They include a manifold absolute pressure (MAP) sensor, coolant temperature sensor (CTS), air temperature sensor (ATS), and a throttle position sensor (TPS). The sensors are manufactured from quality materials, are available for both Ford and GM-style systems, and include a wide variety of applications. The kits work great on normally aspirated, as well as supercharged, turbocharged, 4, 6, and 8-cylinder engines. Now you can take the mystery out of EFI by using one of these complete FAST EFI sensor kits.
( 1 )
$137.95
—
$234.95
JMS Chip ThrottleMax Throttle Body Swap Controllers
JMS Chip ThrottleMax throttle body swap controllers allow you to convert your Mustang's digital throttle body to an analog style throttle body. These kits include the wiring harness as well as the controller to make for an easy conversion.
( 1 )
$399.75
ACDelco ABS Wheel Speed Sensors
Why tempt fate? Replace faulty measuring devices ASAP with ACDelco ABS wheel speed sensors—to restore proper braking function and performance. Hundreds of models are available for fitment on vehicles from the 1980s and up. These recommended replacements ensure the same durability, quality performance, and service life you expect from General Motors parts.
( 11 )
$13.99
—
$42.99
Clearance
ACDelco GM Genuine Parts Brake Pedal Position Sensors
ACDelco GM Genuine Parts brake pedal position sensors monitor the movement or position of the brake pedal to directly activate the brake, brake lights, and turn off the cruise control (if applied). These original equipment brake pedal position sensors have been manufactured to offer the same level of performance, durability and service life you expect from General Motors.
Not Yet Reviewed
$42.99
On Sale
JET Powr-Flo Mass Airflow Sensors
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 247 )
$287.99
$259.19
Clearance
ACDelco GM Genuine Parts Vehicle Speed Sensors
ACDelco GM Genuine Parts vehicle speed sensors report vehicle speed to the instrument panel and engine control module, and are GM-recommended replacements for your vehicle's original components. The sensors signals are used by multiple control modules to adjust or perform functions, such as cruise control, steering assist, and climate control. These GM Genuine Parts vehicle speed sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 1 )
$10.99
$4.50
—
$27.99
MSD Atomic TBI Throttle Position Sensor Modules
MSD Atomic TBI throttle position sensor modules are designed for use with the MSD Atomic throttle body fuel injection system. They connect inline to the Atomic TBI communication network and provide a common 0-5 V throttle position output signal required for the operation of an electronic overdrive transmission or other accessory.
( 3 )
$306.95
Bosch Coolant Temperature Sensors
Bosch coolant temperature sensors accurately monitor fluid in your vehicle to ensure a long and healthy life for your engine. Offering OE or better performance, their robust design delivers high resistance to engine vibrations. Get the right information to your vehicle ECU to keep your engine running strong, safe, and efficient. Order the Bosch coolant temperature sensor designed for your specific application.
Not Yet Reviewed
$129.99
ACDelco ABS Wheel Speed Sensor Wiring Harnesses
ACDelco ABS wheel speed sensor wiring harnesses are quality replacement harnesses designed to meet or exceed OE specifications for extended service life. They're made from top-quality components and match OE fit and function for an easy installation. Signs of wear on the original equipment include corrosion on the wire, cracks in the insulation jacket, failure to stop, or problems with your brakes. These harnesses send readings from the sensor to the ABS module in order to control your anti-lock braking system. The replacements are factory-recommended for specific applications.
Not Yet Reviewed
$73.99
Clearance
Dorman ABS Speed Sensors
Dorman ABS speed sensors are designed to supply information regarding wheel speed to the ABS computer. One of the most common omissions in maintaining a modern anti-lock brake system (ABS) is checking out the speed sensors. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again.
( 37 )
$42.99
—
$46.99
ACDelco Air Temperature Sensors
ACDelco offers air charge temperature sensors for thousands of applications from the 1980s and up. These direct-fit OE replacements install easily and deliver factory-style performance. Maintaining the right temperature for the correct mix of air and fuel is crucial to engine efficiency. Order the sensor recommended for your vehicle.
( 20 )
$8.99
ACDelco GM Genuine Parts Brake Fluid Level Sensors
ACDelco GM Genuine Parts brake fluid level sensors detect the fluid level within the brake fluid reservoir. These brake fluid level sensors are GM recommended replacements for your vehicle's original parts. These GM OE brake fluid level sensors have been manufactured to provide you with the same performance, durability, and service life you expect from General Motors.
Not Yet Reviewed
$9.99
