Availability
Ideal for drag racing, the HalTech laser ride height sensors control wheelies by measuring the distance from the sensor to the ground and feeding that information to the ECU. You can then set up a maximum lift distance and map the ignition and fuel against the front-end lift and the road speed. When the front end lifts, the ECU will start cutting ignition or fuel or both. Once the front end comes down and contacts the ground the ECU restores the fuel and ignition to its original setting. These kts include connection cable, matching male Deutsch DTM-3 connector, protective glass lens, and setup guide.
Not Yet Reviewed
$860.00
AEM Electronics VCU300 low-voltage harnesses are pre-terminated and designed to be installed in the front half of an electric vehicle. This harness offers flying leads for VCU300 power, wake switch, accelerator pedal, brake switch and heater with pre-wired connections for Comms port (DB9), Inline CAN, and AEM ancillary devices. Connector interface features include: * AEM VCU300 (VCU) * Battery Management System--Master (BMS) * Power Distribution Unit (PDU) * Main relay * Fuse * VCU300 power flying lead * 12 V battery flying leads (12 V battery) * Wake switch flying lead * Accelerator pedal position flying leads (APP) * Brake flying leads (Brake) * Heater flying lead * Insulation monitoring device lead (IMD) * DB9 communications port (COMMS) * AEM keypad (Keypad) * AEM dash (Dash) * Inline signals * Inline CAN
Not Yet Reviewed
$999.95
AEM Electronics VCU275 low-voltage harnesses are pre-terminated and designed to be installed in the front half of an electric vehicle. This harness offers flying leads for VCU275 power, wake switch, accelerator pedal, brake switch and heater with pre-wired connections for Comms port (DB9), Inline CAN, and AEM ancillary devices. Connector interface features include: * AEM VCU275 (VCU) * Battery Management System--Master (BMS) * Power Distribution Unit (PDU) * Main relay * Fuse * VCU275 power flying lead * 12 V battery flying leads (12 V battery) * Wake switch flying lead * Accelerator pedal position flying leads (APP) * Brake flying leads (Brake) * Heater flying lead * Insulation monitoring device lead (IMD) * DB9 communications port (COMMS) * AEM keypad (Keypad) * AEM dash (Dash) * Inline signals * Inline CAN
Not Yet Reviewed
$1,049.95
Dorman NOx (Nitrogen Oxide) sensors are high-temperature designs that detect NOx levels in diesel-fueled vehicles that must comply with state emissions regulations. As state emissions requirements become more demanding for diesel vehicles, it is imperative to have a quality sensor to notify the driver when high amounts of NOx levels are in the engine. Bring your vehicle up to compliance with Dorman NOx sensors.
( 2 )
$775.99
Standard Motor offers over 40 steering angle sensors that show the rate of turn, wheel angle, and other data for a high-quality direct-fit replacement. Designed to deliver trouble-free, consistent performance, all steering angle sensors are made from high-quality materials for ultimate durability and are manufactured to meet or exceed strict quality requirements. Select the Standard Motor steering angle sensor recommended for your application.
Not Yet Reviewed
$787.99
—
$872.99
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$756.99
—
$885.99
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$758.99
—
$1,052.99
One of the best creature comforts ever invented for drivers is cruise control. Standard Motor Products offers a full line of replacement cruise control distance sensors for fitment on a variety of vehicles. These precisely engineered sensors undergo rigorous testing to meet or exceed OE specs. Standard Motor cruise control distance sensors make long drives comfortable and safe.
Not Yet Reviewed
$759.99
—
$993.99
Standard Motor blind spot detection sensors are direct-fit OE replacements to ensure proper fit and function. They monitor the sides of your vehicle to notify the driver of unseen obstacles—helping you to avoid accidents, minor rear-end collisions, and inaccurate parking, as well as making safer lane changes on the highway. These blind spot detectors have a plug-and-play design for easy installation. Order the model recommended for your vehicle application.
( 1 )
$757.99
—
$1,028.99
Standard Motor Products features the broadest sensor coverage in the market to meet service professionals' needs with the highest quality product every time for reliable performance. Standard Motor flex fuel sensors are designed to exceed OEM specifications for proper fit and precise operation to maintain sensor integrity and ease of installation. Flex fuel sensor features and benefits: * One-piece laser welded body for maximum protection optimum performance * Dual internal talc seal makes oxygen sensors last longer * Breathable PTFE membrane allows increased airflow for a faster switch rate to improve fuel economy and save the motorist money at the pump * Stainless steel shield protects the element from thermal shock and regulates proper airflow to ensure faster sensor response and better performance
Not Yet Reviewed
$860.99
Dorman cruise control distance sensors are designed to match the fit and function of the original sensor on specified vehicles, and are engineered for durability and reliable performance. These replacement sensors restore functionality for an original part that has failed from an electrical malfunction or collision. Order the model recommended for your application.
Not Yet Reviewed
$914.99
—
$1,048.99
Mopar Replacement ABS modules are genuine OE replacements. That means your Chrysler, Dodge, Fiat, Jeep, and even some Mitsubishi models will receive the perfect part to repair and/or restore performance and safety, just as it should be. These modules are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Order the ABS module recommended to fit your application.
( 14 )
$834.99
—
$1,079.99
Dead speed sensor? Swap it out for new Motorcraft replacement speed control sensors--an affordable solution. They are crafted to stringent OE standards to provide exact vehicle-specific fit and functionality. Motorcraft--their name says quality, dependability, and performance parts.
( 1 )
$788.99
—
$1,028.99
The variable valve timing solenoid alters the supply of oil pressure to the camshaft depending on the engine's speed and load and can either advance or retard cam position, which provides several benefits, including improved engine operation increased engine power, reduced fuel consumption, and decreased emissions. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts variable valve timing solenoids offer superior coverage for domestic and import applications. Order the model designed to fit your application needs.
( 1 )
$865.99
Motorcraft ABS wheel speed sensors are designed for use with electronic systems in Ford and Lincoln vehicles. They are responsible for relaying the wheel speed to the ECU so that it can tell the ABS system how much pressure to safely apply. Maintain your vehicle with the proper fit and function Motorcraft parts, the preferred choice of Ford.
( 2 )
$780.99
—
$811.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$884.99
Is your check engine light on? Is your vehicle hesitating, or even stalling? You may need of a new mass airflow sensor. Bosch mass airflow sensors were developed to replace your OEM components. They're manufactured to strict standards and made of high-quality materials.
( 2 )
$835.99
—
$925.99
Accelerator Pedal Position Sensor (APPS) failure may cause a vehicle to dangerously drop speed while operating on the road. NTK accelerator pedal position sensors deliver the correct fit and function to restore safe, efficient driving. They provide the ECM with two DC voltage signals that change as the position of the accelerator pedal changes, and are the exact original equipment design, incorporating the circuitry specified by OEMs with the sensor element, ensuring consistency in signal output. Select the NTK sensor designed for your vehicle.
Not Yet Reviewed
$765.99
Spectra Premium's line of mass airflow sensors are manufactured to ensure premium performance and durability. MAF sensors measure the amount of airflow entering the intake manifold, allowing the ECM to adjust the correct fuel mass to the engine. These replacements provide more consistent voltage to eliminate engine rough idle problems. Spectra uses ceramic-built printed circuit boards protected by silica gel, providing superior resistance to temperature changes and vibrations. Sensors are available for dozens of Audi applications from 2001 and up.
Not Yet Reviewed
$780.99
Banks Power offers iDash Pro and PedalMonster throttle response enhancers for a wide range of applications, including many Chevrolet, GMC, Cadillac, Dodge, Ford, Ram, Lexus, Scion, Subaru, and Toyota cars, trucks, and vans from 2005 and up. PedalMonster is the only OBD-connected throttle sensitivity controller for gas and diesel vehicles. It's tuned to eliminate factory throttle delay, instantly making your vehicle more fun to drive—and actually fixes dangerous flaws found in every other throttle controller. Additional details: * Total Throttle Control: Unlike conventional cable throttles, where your pedal is directly attached to the engine's butterfly valve, electronic accelerator pedals are not mapped linearly. Part throttle drivability is often dampened as a means to stretch fuel economy, giving a mushy and unresponsive feel when on the road. Banks Power spent months engineering smooth pedal contours that are a pleasure to drive. * Tune Your Sensitivity: Select from PedalMonster's 3 driving environments with a total of 150 unique throttle contours and tune out your pedal's dead spot: -- City: Provides a smooth driving experience with a linear throttle feel and is tuned for daily driving -- Sport: Adds more sensitivity in the throttle's midrange for a sportier throttle contour feel -- Track: Lets you get into your power sooner with less throttle input, helping push through turbo spool lag or delay * Choose Your Control: PedalMonster can be used as a stand-alone device, controled by Banks' free mobile app for a stealthy install. Or, pair the PedalMonster with an iDash Pro or Data Pro to be able to adjust pedal settings on-the-fly and open up a whole world of data not available on your vehicle's dashboard. See what data iDash Pro can display for your vehicle. With Bluetooth connectivity built in, new features and support for other vehicles can be added over-the air. No computer required. * OBD-II Connectivity Brings Safety: PedalMonster is the ONLY throttle sensitivity controller connected via the vehicle's +12 V OBD-II port to read vehicle data. This reliable power connection and vehicle information is used to provide smooth pedal response and enhanced safety features. Key features: * 150 selectable smooth throttle contours * Smartest, safest, throttle sensitivity controller available * Tip-in control gradually adds sensitivity below 10 mph * Reverse Safety returns pedal to stock in reverse * ActiveSafety failsafe system * Powered by fused +12 V via OBD, not +5 V pedal reference circuit like others * Control and view activity in real-time via mobile app or iDash * Simple plug-and-play installation
Not Yet Reviewed
$779.00
Mopar Replacement oxygen sensors offer high-quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, or Jeep rolling down any road you choose to travel. When you need to replace and you want the proper fit, correct calibration, and reliable operation choose genuine Mopar Replacement oxygen sensors. Order the model designed for your specific vehicle application.
( 1 )
$1,052.99
Mopar Replacement accelerator pedal position sensors are genuine OE-replacements. This means your Chrysler, Dodge, Plymouth, Jeep, and even some Mitsubishi models will receive the perfect part to repair and/or restore performance and safety, just as it should be. These sensors are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Order the part application designed to fit your vehicle.
( 3 )
$892.99
Mopar Replacement rain sensors are genuine OE replacements designed to monitor periods of heavy rain and snow. Mopar sensors are engineered from high-quality materials to provide you with reliable, long-lasting service. Made from factory specs, they deliver the right fit and function to repair and/or restore performance and safety, just as it should be. Order the model recommended for your vehicle.
Not Yet Reviewed
$762.99
Mopar Replacement fuel pressure sensors are built to the same original equipment specifications as those produced for vehicle manufacturers to ensure proper system functionality and restoration of vehicle performance. Because sensors wear out, a quality replacement is necessary. Mopar Replacement offers a comprehensive range of OE-quality vehicle system sensors to provide very reliable and accurate measurements and feature extremely fast response times to ensure your vehicle runs as intended.
Not Yet Reviewed
$820.99
—
$875.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
