Availability
Showing In Stock Items. Show All 12 Items.
Are you in need of an air-fuel-ratio monitor kit for your HP Tuned vehicle? Measure your AFRs with extreme precision using Ballenger Motorsports' AFR500v3 wideband control kits preconfigured specifically for vehicles using HP Tuners' software. As one of the most critical tools a tuner requires for properly calibrating a vehicle, the AFR500 air fuel ratio monitor provides professional grade measurement of air-fuel-ratio without breaking the bank. Ballenger AFR500v3 kits offer a linear analog output to be used as an input to engine control systems, gauges, or data acquisition systems. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. Key features and benefits: * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Display gasoline (standard) * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Digitally derived output with a higher resolution digital/analog converter * 4 times the measurement resolution (4096 increments compared to the previous 1024) * ASIC chips (a common point of failure from electrostatic damage) have been replaced with a custom board providing better protection and upgrade capabilities * Ability to display from 0.0 to 6.0 in lambda setting for better flexibility with alternate fuels, such as diesel * Ability to upgrade firmware for future sensor types * All harnesses, control units, accessories, etc. are backward and forward-compatible * Options are selectable at any time via internal jumpers * NTK Calibration grade sensor highly recommended for low AFR methanol applications
Not Yet Reviewed
$549.99
FAST has revolutionized the tuning industry with the most advanced, app-based, wireless air/fuel meters, in both dual and single sensor options. These kits use an underhood-mounted Bluetooth module, connected to Bosch LSU 4.9 oxygen sensors in one or both of your engine's exhaust outlets—giving you the full story on the state of your engine's tune. With the dual sensor unit, you can read both wideband oxygen sensors individually, or average them together for super accurate readings of the engine's true air/fuel ratio. Easy to use with any iOS or Android device, the FAST wireless air/fuel meter app includes a simple, built-in data logger that records up to two minutes of air/fuel and RPM data. Fuel calibrations are preloaded for measuring gasoline, all popular ethanol blends, methanol, diesel, and more. Advanced features include 0-5 V output for external data loggers and digital gauges. Additionally, a selectable module output is provided that can be used as: an RPM-activated window switch; a lean air/fuel ratio safety cut-off; or an innovative anti-theft feature. This would allow you to manually activate/deactivate a vehicle immobilizing relay—a simple way to protect your vehicle from theft! Additional details: * Monitor air/fuel ratio directly from any iOS or Android smartphone * Supports all popular fuel types * Clean install, no extensive wiring or permanent gauges needed * Includes oxygen sensor bungs and 39.37 in. of sensor wiring With features unlike anything else on the market, it's clear that FAST wireless air/fuel meter kits are the best choice for the serious engine tuner.
( 4 )
$734.95
Looking for a solution to measure your vehicle's air-fuel ratio with CAN configuration? Designed for professional tuners and DIY enthusiasts alike, Ballenger AFR500CANv3 wideband monitor kits provide plug-and-play digital CAN Bus messaging and the ability to configure for CAN-enabled systems with specific presets for HP Tuners, making them a seamless and convenient option for measuring air-fuel-ratio in your HP Tuned build. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. They come equipped with PC software for programming your CAN or OBDII message structure--no adapters or extra hardware are required for PC programming. Key features and benefits: * CAN flying lead and USB programming harness * PC software for full digital programmability * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * Display lambda * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * CAN specific manual addendum * HP Tuners/OBDII CAN connection * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Programmable CAN termination resistor * Sensor averaging filter setting * Oxygen percent output * Fault condition diagnostics * IP, pump cell current output * Sensor temperature output * Heater duty cycle output * Battery voltage output
Not Yet Reviewed
$639.98
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$511.99
—
$514.99
HalTech Dual Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. * Suits: Bosch LSU 4.9 Sensor * Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, 2 Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
Not Yet Reviewed
$550.00
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 21 )
$520.99
—
$572.99
HalTech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles
( 2 )
$550.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
