Availability
Showing In Stock Items. Show All 27 Items.
Aeromotive VaporWorx fuel pressure sensor datalogging kits are designed to monitor and record the fuel pressure in a vehicle's fuel system, allowing users to precisely analyze and adjust fuel pump speed based on real-time pressure readings, ensuring optimal fuel delivery and performance, particularly in high-performance applications where fuel demand can fluctuate significantly. Essentially, these kits provide valuable data to fine-tune a fuel system for efficiency and power delivery by monitoring pressure changes under various driving conditions. Key points about VaporWorx fuel pressure sensor datalogging kits: * Perfect for datalogging systems or as a replacement kit for your VaporWorx PWM kit (sold separately) * Precise fuel pressure monitoring—the kit includes a dedicated fuel pressure sensor that accurately measures the pressure in the fuel rail, providing detailed data for analysis * Pump speed adjustment—by reading the fuel pressure data, the VaporWorx controller can dynamically adjust the fuel pump speed to maintain the desired fuel pressure at all times, optimizing fuel delivery based on engine demands * Datalogging capability—the system allows users to record fuel pressure data over time, enabling them to identify potential issues like pressure drops during acceleration or inconsistencies under different driving conditions * Performance enhancement—by precisely regulating fuel pressure, users can optimize engine performance, improve throttle response, and potentially increase horsepower * Troubleshooting Tool—datalogging data can assist in diagnosing problems related to fuel pressure regulation, such as a failing fuel pump or a faulty fuel pressure regulator Note: Some applications, depending on where the sensor is mounted, may require a 10-20uf capacitor to be installed across the output and ground. The 5-volt supply not included.
Not Yet Reviewed
$79.55
ICT Billet offers MAF (mass airflow) harness extensions in a variety of lengths and configurations. They're made with OEM tooling, OEM Delphi connector, lock seals, and terminals—and utilize factory harness wire colors. Don't chance a poorly running engine due to cheap wire connectors; choose the quality of ICT Billet MAF harness extensions.
Not Yet Reviewed
$78.99
Get your vehicle running smoothly again with an Cardone remanufactured mass airflow sensor. These economical MAF sensors precisely track OE output curves and maintain spec tolerances to ensure accurate scan tool readings for proper operation. All critical components are 100 percent re-soldered to ensure excellent electrical connections, and tested with automated computerized equipment for functionality and reliability. Sensors are tested on vehicles to ensure form, fit, and durability. Meet all performance requirements throughout the entire operating range of your vehicle with Cardone remanufactured mass airflow sensors.
( 27 )
$54.99
—
$207.99
Avoid conductivity issues that can cause your engine to run poorly and be difficult to diagnose. ICT Billet MAF/IAT breakout harnesses are assembled with OEM tooling and use OEM harness wire colors, as well as OEM Delphi connector, lock, seals, and terminals. ICT Billet MAF/IAT harnesses are offer in different styles for retaining MAF in factory position while breaking (relocating) IAT sensor to different location, converting small 3-wire MAF to larger 5-wire MAF/IAT sensor, or when you need more length when relocating intake/air filter to opposite side of engine from factory harness and IAT is relocated external to the MAF sensor. Choose the one that meets your "breaking" needs.
Not Yet Reviewed
$65.99
Cardone new mass airflow sensors meet or exceed OE specifications. These new MAFs are built with Cardone engineered technology. They precisely track OE output curves and maintain spec tolerances to ensure accurate scan tool readings for proper operation. And every component is rated to handle a broad range of temperatures and altitudes. Select new parts that offer quality and value--choose Cardone new mass airflow sensors.
( 5 )
$62.99
—
$135.99
Cardone remanufactured camshaft synchronizers provide reliable performance at the best price. Each unit is tested, verifying its signal strength, wire harness polarity, ignition coil quality and overall pick-up performance, ensuring that your vehicle always starts on command. Cardone remanufactured camshaft synchronizers require an alignment tool (sold separately) to help facilitate an easy and proper installation. Features and Benefits include: * Precise machining tolerances prevent oil leakage, poor timing, setting of the Check Engine light, and premature failure * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * All electronic module components are 100 percent computer tested to ensure full functionality * Guaranteed fit and function * Meets or exceeds OEM performance
Not Yet Reviewed
$82.99
Cardone new camshaft synchronizers feature a premium, sturdy design for long-lasting dependability. Each unit is built to meet or exceed OE fit, form, and function—and is thoroughly inspected to guarantee optimum, trouble-free performance. Cardone new camshaft synchronizers require an alignment tool (sold separately) to facilitate an easy and proper installation.
( 1 )
$93.99
Dorman MAP (manifold absolute pressure) sensors significantly cut repair costs, providing a cost savings advantage. For accurate air intake system pressure readings, the MAP sensor will measure the amount of pressure inside the manifold. Constructed of plastic and brass material for increased durability, these are direct replacement units for a proper fit every time. Replacing a failed sensor will restore proper engine function and drivability to your rig. Dorman MAP sensors are thoroughly tested to meet quality standards, and no special tools are required for installation.
Not Yet Reviewed
$57.99
—
$76.99
Dorman barometric pressure sensors are an essential component of the vehicle's engine management system. The primary function of the BAP sensor is to measure the atmospheric pressure and temperature of the environment the car is driving in, making necessary adjustments to the fuel trim and engine timing. Monitoring the air pressure and temperature outside of the engine is critical for better overall vehicle performance, helping to prevent acceleration issues, stalling, and costly engine damage. Dorman direct replacement barometric pressure sensors are easy to install, thoroughly tested and affordable, ensuring that the right engine adjustments are made when driving in different climate areas. Barometric Pressure sensor features: * High-quality direct replacement for a proper fit every time * Replacement prevents drivability issues and reduced engine performance * No special tools required for installation * Part has undergone vehicle try-on testing to meet product standards and quality
Not Yet Reviewed
$63.99
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These "Red" single-channel hall effect sensor components are made from high-quality materials and built to ensure proper fit and function. * Thread: M12 x 1.0 * Suits: Wheel Speed, Crank/Cam etc. * Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)
( 1 )
$88.00
HalTech offers replacement coolant temperature sensors for a variety of applications. They're available in different thread configurations: Model 010300 includes: Matching Delphi plug and pins Model 010302 includes: Matching Delphi plug and pins Model 010304 includes: Matching male Deutsch DTM-2 connector
( 1 )
$52.00
Summit oxygen sensors will keep your engine running reliably by properly monitoring the amount of oxygen in your exhaust stream. Our sensors are manufactured to the highest quality standards.
( 1 )
$80.99
—
$94.99
HalTech offers a wide range of automotive parts to service or maintain your vehicle. These replacement air temperature sensors are designed to fit and perform just like the originals. They're available in a variety of fitting styles and sizes for both universal and model-specific applications.
Not Yet Reviewed
$52.00
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement fuel level sender signal conditioners include a matching set of Deutsch DTM 4 connectors. They're used to filter the fuel level signal voltage from the fuel sender and improve accuracy.
Not Yet Reviewed
$88.00
MotoRad crankshaft position sensors guarantee OEM accuracy and improved engine operation. These replacement components are manufactured with factory-style materials and original specs to ensure proper fitment and performance. They're available for a wide range of vehicles. Additional product details: * Fluorelastomer O-rings provide superior resistance to high temperature and all oil formulations for long-life durability * Proprietary ferromagnetic material withstands extreme operating temperatures to ensure a precise voltage signal to ECM * Tier 1 OE sensor protects against power spikes and stray electromagnetic fields for optimal positioning * Enamel-coated ultrafine copper wire for optimal heat protection
Not Yet Reviewed
$58.99
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. These Dorman camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Dorman camshaft position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Dorman.
( 16 )
$69.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
