Availability
Showing In Stock Items. Show All 134 Items.
Canton Racing Accusump electric pressure control valve kits are available for discharge/refill in different psi ranges to suit your needs. These valves have the convenience of an electric valve for remote-mounted units and the rapid refill rate of a manual valve as required in racing. The electric pressure control valving will only allow the Accusump to discharge oil when the engine's oil pressure drops below a predetermined level, and only refills when the pressure rises above that level. Each kit comes with a regulator, electric valve, wire, toggle switch, pipe nipple, terminals, and instructions.
( 8 )
$88.00
—
$98.00
ICP sensor failure is a common problem with high-mileage diesels typically resulting in trouble starting, rough idling, and sudden power loss. Keep your vehicle running right with Mishimoto injector control pressure (ICP) sensors that meet all OEM specifications to properly restore engine performance and startup capability. Each kit includes a high-quality sensor, new pigtail harness to eliminate issues from the potentially contaminated stock connector, a durable O-ring seal to ensure leak-free fitment, and heat-shrink butt connectors for easy installation. As with all their products, these ICP sensor kits are backed by the Mishimoto Lifetime Warranty for peace of mind and dependable performance. Select the proper kit for your diesel truck.
Not Yet Reviewed
$64.95
Rostra vehicle speed sensors are speed signal generators that will help you convert to the signal type that you need. The GM sensors include a wiring harness, a GM cable adapter, and a sensor adapter. The universal sensors include a wiring harness and a magnetic pickup to provide a usable speed sense signal.
( 35 )
$58.35
—
$102.99
Standard Motor Products steering wheel position sensors are direct-fit OE replacements that ensure ease of installation. These sensors are made of high-quality materials to withstand extreme conditions and they undergo extensive testing to ensure reliability.
Not Yet Reviewed
$88.99
—
$101.99
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 104 )
$62.99
These AEM Electronics wideband UEGO sensors are used in AEM single channel UEGO systems. They may also work with other wideband UEGO controllers. Features include: * Much more accurate AFR readings than OEM sensors * Response time of less than 100 milliseconds * Measure from 11:1 AFR to atmospheric air * Latest Nernst cell/oxygen pump hybrid technology * Planar-configured zirconium dioxide sensor * Integrated heater element warms up in less than 20 seconds * PTFE insulators withstand temperatures of up to 1,400 degrees Fahrenheit (800 degrees Celsius) * Low current draw
( 22 )
$111.95
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 107 )
$50.99
—
$106.99
ACDelco Gold manifold absolute pressure sensors are high-quality replacements for many vehicles on the road today. MAP sensors are part of the fuel and engine management system, measuring the intake manifold pressure. Their signal is used by the engine control module, along with the throttle position sensor, to calculate the amount of air entering the engine--so that the correct amount of fuel is injected for optimum combustion. Order the model recommended for your application.
( 8 )
$72.99
—
$85.99
ACDelco GM Genuine Parts fuel pressure sensors send readings to the powertrain control module, which uses the data to adjust fuel delivery parameters. These true GM OE sensors are factory-recommended replacements, manufactured to provide the performance, durability, and service life you expect from General Motors. Monitor your fuel system accurately with the model designed for your application.
( 3 )
$54.99
—
$105.99
ACDelco throttle position sensors electronically inform the powertrain control module (PCM) of the throttle valve angle. The PCM uses this input to regulate your fuel and ignition systems. These replacement sensors are available in dozens of models for fitment on thousands of vehicles spanning a half-century. For the proper fit and performance, order the ACDelco throttle position sensor recommended for your application.
( 19 )
$50.99
—
$65.99
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. Camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Standard Motor Products replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.
( 14 )
$50.99
—
$104.99
Hitachi offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Hitachi's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 4 )
$51.99
—
$111.99
Aeromotive VaporWorx fuel pressure sensor datalogging kits are designed to monitor and record the fuel pressure in a vehicle's fuel system, allowing users to precisely analyze and adjust fuel pump speed based on real-time pressure readings, ensuring optimal fuel delivery and performance, particularly in high-performance applications where fuel demand can fluctuate significantly. Essentially, these kits provide valuable data to fine-tune a fuel system for efficiency and power delivery by monitoring pressure changes under various driving conditions. Key points about VaporWorx fuel pressure sensor datalogging kits: * Perfect for datalogging systems or as a replacement kit for your VaporWorx PWM kit (sold separately) * Precise fuel pressure monitoring—the kit includes a dedicated fuel pressure sensor that accurately measures the pressure in the fuel rail, providing detailed data for analysis * Pump speed adjustment—by reading the fuel pressure data, the VaporWorx controller can dynamically adjust the fuel pump speed to maintain the desired fuel pressure at all times, optimizing fuel delivery based on engine demands * Datalogging capability—the system allows users to record fuel pressure data over time, enabling them to identify potential issues like pressure drops during acceleration or inconsistencies under different driving conditions * Performance enhancement—by precisely regulating fuel pressure, users can optimize engine performance, improve throttle response, and potentially increase horsepower * Troubleshooting Tool—datalogging data can assist in diagnosing problems related to fuel pressure regulation, such as a failing fuel pump or a faulty fuel pressure regulator Note: Some applications, depending on where the sensor is mounted, may require a 10-20uf capacitor to be installed across the output and ground. The 5-volt supply not included.
Not Yet Reviewed
$79.55
So, you wish you had surge control with your Accusump pre-oiling electric valve? Now you can with Canton Racing Accusump EPC conversion kits. These EPC conversion kits allow you the convenience of an electric valve with the rapid refill rate of the manual valve needed for racing. The electric pressure control valves permit automatic charge and discharge as needed to maintain oil pressure during cornering, acceleration, and braking. Prelubing your engine components is important and so is being ready for that next oil surge to keep you in the race.
Not Yet Reviewed
$98.00
BBK throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. BBK throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable BBK throttle position sensors.
( 14 )
$69.99
Dorman crankshaft position sensors are direct-fit replacements that are easy to install and offer long, reliable service. They are constructed from high-quality plastic with metal-reinforced mounting points to protect against failure. Dorman sensors accurately measure crankshaft location to detect misfires and control engine timing. They are manufactured to strict engineering quality standards and are available for a wide variety of applications.
( 2 )
$50.99
—
$98.99
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. These Dorman camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Dorman camshaft position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Dorman.
( 16 )
$50.99
—
$101.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$51.99
—
$107.99
Crown Automotive crankshaft position sensors are used to control ignition timing and the fuel injector. They're crafted to compile information about the working condition and speed of the crankshaft, ensuring your engine cylinders are always performing as needed. This enables you to set ignition timing precisely to improve the performance of the engine cylinders. Crown crankshaft position sensors are available for fitment on a wide range of vehicles.
( 7 )
$52.99
—
$71.99
Has your vehicle ever mysteriously died on you, only to start up fine after emergency road service showed up--and then it happens again? Could be caused by malfunctioning crankshaft position sensors. Beck/Arnley sensors help to control many functions on your car, from ignition timing to power output to fuel efficiency, by relating crucial data to your vehicle's ECU. If your crankshaft position sensors become burnt or worn out, solve the "mystery" with new sensors from Beck/Arnley, for a life made easier by parts made right.
( 3 )
$51.99
—
$105.99
OMIX-ADA crankshaft position sensors are direct-fit replacements for the best fit and function. Crankshaft rotational speed and engine rpm are important factors in ignition timing control. Don't let worn-out sensors hamper your vehicle's performance. Replace them with OMIX-ADA crankshaft position sensors.
Not Yet Reviewed
$89.99
—
$109.99
ACDelco GM Genuine Parts fuel rail pressure sensors send electronic signals to the engine control module that communicate the fuel rail internal pressure. These OE sensors are factory-recommended replacements, manufactured to provide the performance, durability, and service life you expect from General Motors. Order the model designed for your application.
Not Yet Reviewed
$74.99
—
$75.99
ACDelco GM Genuine Parts mass airflow sensors are a key part of the engine management system, and they are GM-recommended replacements for your vehicle's original component. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. These original equipment mass air flow sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 22 )
$58.99
—
$88.99
Standard Motor mass airflow sensors are higher quality, precision alternatives to remanufactured models. MAF sensors measure the amount of airflow entering the intake manifold and must communicate clearly with your vehicle's Engine Control Module (ECM). Remanufactured components with debris from prior use can hinder this communication and cause your vehicle to experience drivability issues. With many new—not remanufactured—MAF sensors in the Standard lineup, they cover more than 90 percent of all MAF-equipped vehicles, and all are airflow-calibrated to ensure accuracy. SMP-manufactured sensors are designed with improvements such as thicker walls, upgraded components, and a custom-designed platinum RTD sensor. The result is a line of MAF sensors that provide highly accurate readings and precise airflow output under all operating conditions. Order the model designed for your car, truck, or van.
( 2 )
$56.99
—
$109.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
