Availability
Showing In Stock Items. Show All 30 Items.
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$74.99
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$80.99
—
$88.99
AEM Electronics No-Weld O2 sensor mounts enable users to mount a wideband O2 sensor without having to weld a sensor bung onto the exhaust. This is especially helpful for those that don't know how to weld or can't find someone that does. Simply drill a hole in the exhaust, install the gasket, and bolt the clamp. It's that easy!
( 23 )
$66.45
FAST throttle position sensors are designed to bolt onto the throttle blade shaft and relay throttle opening/closing information to the system ECU. These throttle position sensors are constructed from highly conductive, plastic-resistance material with a "sensitive" rotator for accurate throttle position measurement.
( 4 )
$76.95
—
$80.95
Summit Bucks
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 24 )
$65.99
Motorcraft throttle position sensors replace your vehicle's worn or malfunctioning part. These replacement throttle position sensors relay throttle opening/closing information to the system's ECU.
( 15 )
$58.99
Summit Bucks
ACDelco offers air charge temperature sensors for thousands of applications from the 1980s and up. These direct-fit OE replacements install easily and deliver factory-style performance. Maintaining the right temperature for the correct mix of air and fuel is crucial to engine efficiency. Order the sensor recommended for your vehicle.
( 20 )
$61.99
Clearance
Astemo MAP sensors support accurate measurement for reliable engine performance. Typically found in the induction system of the engine, the manifold absolute pressure sensors help the engine control module to manage engine characteristics to achieve the most efficient and longest lasting results. The sensor works by sending electrical signals to the ECM within a specified voltage range created by highly sensitive and accurate piezoelectric crystals, which, when compressed by the pressure in the induction system, generates an electrical output. Designed to meet the exact needs of each specific vehicle, the Astemo MAP sensors are the premium choice. Order the MAP sensor model designed for your application needs.
Not Yet Reviewed
$77.99
—
$113.99
$54.50
—
$81.50
Clearance
Astemo offers throttle position sensors a wide range of domestic and import vehicles. These stock replacements are built to OEM specifications for performance and longevity. A throttle position sensor is used to measure how open the throttle valve is—and therefore controls the amount of air which can flow into the engine's intake manifold. Astemo's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the TPS model recommended for your application.
Not Yet Reviewed
$54.99
—
$56.99
Keep your vehicle safe with EBC disc brake pad electronic wear sensors. These units help keep you aware of how much material is left on your brake pads and indicate when you need to replace them. The EBC sensors are available for a variety of submodels from BMW and Audi, in particular.
Not Yet Reviewed
$54.54
—
$64.57
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$60.99
Clearance
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 3 )
$51.99
Hella crankshaft position sensors will accurately measure speed and position of your crankshaft and provide the data to engine control. These are quality-built, direct replacements for your malfunctioning sensors. The amount of electronic components in vehicles is constantly growing, and Hella is ready to help you service them to keep your vehicle properly maintained for the road ahead. Sensors are available for applications from 1992 and up.
Not Yet Reviewed
$50.99
Have a faulty ABS speed sensor on your GM vehicle? Don't tempt fate—replace it ASAP with Chevrolet Performance ABS wheel speed sensors to restore proper ABS function and performance. These GM-recommended replacement parts are manufactured to fit your specific GM vehicle, providing durability and the same quality performance and service life that you expect from General Motors.
Not Yet Reviewed
$52.99
Hella MAP sensors accurately measure the air/fuel ratio of your engine and helps provide the data to the ECM. These are quality-built, direct replacements for your malfunctioning sensors. The amount of electronic components in vehicles is constantly growing, and Hella is ready to help you service them to keep your vehicle properly maintained for the road ahead.
Not Yet Reviewed
$61.99
—
$67.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$56.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
