Availability
Showing In Stock Items. Show All 59 Items.
AEM Electronics cam angle sensor discs are 24-tooth direct replacements for the factory CAS discs and may be necessary with some Series 1 or 2 EMS when you need to run a different CAS. Before purchasing, be sure that the center of the AEM CAS disc looks exactly like the stock disc in your distributor, and match the hubs of your disc to your AEM disc before ordering.
( 1 )
$54.45
Chevrolet Performance MAP sensors are high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes--and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. The MAP sensors are available to fit most GM engines, including the LS Series. They're built from factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$72.99
Caspers Electronics knock sensor wiring harnesses with LS1 cam sensor adapter allow the cam sensor used on the front of an LS2/3/4/7/9 engine to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. They are ideal for LS2/3/4/7/9 motor conversions and are compatible with the PCM harness in LS1/LS6 vehicles. Additionally, they include a knock sensor extension, which allows the single-wire LS1 knock sensors located on top of the LS1 manifold to be relocated on both sides of the LS2-series block, using the factory LS1 engine harness. The Caspers Electronics knock sensor wiring harnesses with LS1 cam sensor adapter have the correct length and thermal protection required when routing near hot engine components.
( 5 )
$55.99
Spicer Drivetrain ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of your ABS system, and pulses at low-speed can be frustrating and dangerous. Spicer tone rings will maintain your vehicle's sensor readings and allow your ABS system to function at its peak.
( 1 )
$51.99
—
$69.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$58.99
Holstein Parts ABS sensor line has superior coverage for domestic and import applications. Anti-lock Braking, ABS Systems allows the driver to maintain control of the car in an emergency braking situation. The ABS system relies on sensors to monitor the wheel's speed and communicate with the ABS computer to ensure ideal performance. The data from the ABS sensor then allows the computer to balance the speed of each wheel to prevent the brakes from locking up and avoiding dangerous skidding situations. Holstein Parts focuses on using only the highest quality materials for their products, all parts are manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part.
( 3 )
$66.99
Summit Bucks
These Delphi camshaft position sensors feature a digital output design for maximum signal to noise ratio. They are not impacted by temperature changes and provide long-lasting sensor protection. These Delphi camshaft position sensors are also manufactured to meet or exceed OE requirements to ensure quality and long-lasting durability.
( 12 )
$57.99
Summit Bucks
Delphi engine crankshaft position sensors exceed OE requirements and undergo certified electrical testing. They feature enhanced sensing functionality that delivers reduced emission, improved reliability, and superior drivability. Delphi engine crankshaft position sensors are not impacted by temperature changes and provide robust, long-lasting sensor protection. Choose Delphi for the OE replacement parts that your car was born with.
( 16 )
$76.99
How fast is your cam spinning and why is it important to know? Beck/Arnley camshaft position sensors enable you to accurately measure camshaft speed. This speed determines when your air/fuel mixture should be ignited in your engine cylinders and sends data from your camshaft to your engine management system to keep your vehicle running smoothly and more economically. When you need to replace your camshaft position sensors choose parts made right from Beck/Arnley.
( 1 )
$59.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$50.99
—
$104.99
Get your vehicle running smoothly again with an Cardone remanufactured mass airflow sensor. These economical MAF sensors precisely track OE output curves and maintain spec tolerances to ensure accurate scan tool readings for proper operation. All critical components are 100 percent re-soldered to ensure excellent electrical connections, and tested with automated computerized equipment for functionality and reliability. Sensors are tested on vehicles to ensure form, fit, and durability. Meet all performance requirements throughout the entire operating range of your vehicle with Cardone remanufactured mass airflow sensors.
( 27 )
$75.99
—
$96.99
Re-engineered to address failure points in the original materials and design, Dorman headlight level sensors are designed with thicker materials to eliminate water intrusion. Also as an added feature, this new design allows replacement of just the failed sensor, without the expense and hassle of installing a complete headlight leveling sensor assembly.
Not Yet Reviewed
$82.95
Summit Bucks
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 19 )
$79.99
Dorman crankshaft position sensors are direct-fit replacements that are easy to install and offer long, reliable service. They are constructed from high-quality plastic with metal-reinforced mounting points to protect against failure. Dorman sensors accurately measure crankshaft location to detect misfires and control engine timing. They are manufactured to strict engineering quality standards and are available for a wide variety of applications.
( 2 )
$73.99
—
$92.95
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. These Dorman camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Dorman camshaft position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Dorman.
( 16 )
$67.99
—
$81.99
Motorcraft MAP sensors are the best choice to restore the performance of your Ford, Lincoln, or Mercury vehicle. These manifold absolute pressure sensors are designed and built from premium materials to fit and function, just like the originals you are replacing. Genuine Motorcraft MAP sensors are also engineered with the current innovations and improvements, ensuring a smooth running engine with the most current technology.
( 8 )
$66.99
Motorcraft replacement oxygen sensors are designed to meet Ford Motor Company requirements for durability and emission performance. They will work with the electronic systems in Ford, Lincoln, and Mercury vehicles.
( 5 )
$53.99
Motorcraft throttle position sensors replace your vehicle's worn or malfunctioning part. These replacement throttle position sensors relay throttle opening/closing information to the system's ECU.
( 15 )
$60.99
Motorcraft EGR pressure feedback sensors are engineered to provide original equipment performance and reliability. Sensors undergo comprehensive lab and real world testing in order to meet Ford's rigorous engineering standards. Each sensor is fully sealed and OE electrical connectors are used to provide an accurate fit. Finally, 22 performance, electrical, reliability and durability tests occur during the validation process before it reaches your vehicle. Motorcraft EGR pressure feedback sensors adhere to strict OE specs which minimizes repeat repairs and false check engine warnings.
Not Yet Reviewed
$72.99
ABS pulses at low speed can be frustrating and dangerous. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of the anti-lock braking system. Yukon Gear & Axle ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. They maintain your vehicle's sensor readings and allow your ABS system to function at its peak when you need it. Order the ring recommended for your application.
( 2 )
$73.99
Cardone new mass airflow sensors meet or exceed OE specifications. These new MAFs are built with Cardone engineered technology. They precisely track OE output curves and maintain spec tolerances to ensure accurate scan tool readings for proper operation. And every component is rated to handle a broad range of temperatures and altitudes. Select new parts that offer quality and value--choose Cardone new mass airflow sensors.
( 5 )
$95.99
Dorman ABS speed sensors are designed to supply information regarding wheel speed to the ABS computer. One of the most common omissions in maintaining a modern anti-lock brake system (ABS) is checking out the speed sensors. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again.
( 36 )
$68.99
—
$84.99
Summit Bucks
Delphi EGR valve position sensors are built with the latest OE technology to provide the cleanest signal and efficiently monitor your EGR valve. Delphi sensors have durable, one-piece construction and offer interference protection against noise and other sensor outputs. When you need to replace your sensors, Delphi EGR valve position sensors have the quality, performance, fit, and value that you want.
Not Yet Reviewed
$74.99
BBK oxygen sensor extension harness sets are direct plug-in designs to prevent the cutting and lengthening of your oxygen sensor wires. They are ideal for full-length headers and other specific applications.
( 45 )
$69.99
—
$89.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
