Availability
Showing In Stock Items. Show All 25 Items.
Mount your mass airflow sensor with ICT Billet mounting flanges. Designed to be welded, they are radius-cut on the bottom to accept 4 in. pipe. They include mounting bolts, and of course, they are all manufactured from aerospace-grade 6061 billet aluminum.
( 6 )
$289.99
Wilwood has engineered two reverse floor-mount brake pedal assemblies, one with a standard bias adjuster balance bar and the other with a precision Tru-Bar. Both models incorporate an adjustable clutch pedal assembly. Wilwood floor-mount 2-pedal assemblies feature lightweight aluminum frames with high-strength reinforced I-beam style forged pedal arms and stainless steel foot pedal pads. The pedal heads adjust vertically to fine-tune the pedal ratio (5.25:1 to 6.00:1) for more feel or less pedal effort. The non-skid waffled pedal pads can be laterally adjusted for driver preference. A clutch and two brake master cylinders (sold separately) mount to the assemblies with the adjustable balance bar or the friction-free, trunnion-based adjustable Tru-Bar balance bar, providing front-to-rear brake bias fine tuning. Both the balance bar and Tru-Bar incorporate a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Select the Wilwood 2-pedal assembly with the brake pedal option desired. Key features and notes: * Adjustable pedal ratio * Adjustable foot pads * Forged aluminum pedal arms * Adjustable clutch stop * Wilwood's own black e-coat finish * Triple high-strength steel master cylinder mounts -- Traditional flange mounts at a 45-degree angle -- Accommodates three Wilwood compact remote master cylinders (sold separately) * Balance bar utilizes a pin and clevis pushrod attachment system -- Ensures the smallest possible misalignment angle for bind-free operation through the entire range of travel * Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm with spherical rod-end bearing pushrod attachments -- Reduces compliance and friction for more accurate brake feel -- Pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar-style pedals
Not Yet Reviewed
$430.78
Clearance
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$250.99
—
$527.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 93 )
$255.99
—
$547.99
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
On Sale
A cam sync signal is required to run sequential fuel injection, and Holley camshaft sync kits are ready to set the firing order for top performance. Available in a choice of kits for standard cam height small block and big block Chevys, as well as raised cam height big blocks, these Holley kits fit Jesel and other external, dry timing belt cam drive systems. They provide a plug-and-play cam position signal to Holley EFI systems, but are also compatible with any EFI system which can read a digital, square-wave cam input signal. All of the kits feature unique T-nut and bracket designs that allow for complete sensor adjustment from the outside of the bracket with a single jam nut. Let your ECU know which cylinder is number one in the firing order with a signal from Holley Chevy camshaft sync kits. Holley kits include: * 3-wire H all-effect sensor (8 to 20 V) * Anodized billet aluminum bracket * Mounting hardware * Mating connector * Stainless steel 1/4 in.-20 "flying magnet" screw with a high-temperature, rare-earth magnet
Not Yet Reviewed
$359.95
$314.95
—
$368.95
On Sale
Get that stout performance you've always craved out of your automatic transmission with the installation of a B&M remote throttle position sensor! Designed for use with carbureted engines, B&M throttle position sensors are for use with B&M's automatic transmission controllers (sold separately). B&M throttle position sensors feature a simple three-wire design, making it easier to install. The adjustable cable allows for various mounting locations on your engine, and the supplied bracket provides a place to mount the throttle cable, as well as providing a more professional looking appearance.
( 2 )
$326.95
$294.25
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$250.99
—
$525.99
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$253.99
—
$350.99
On Sale
Hypertech REACT Performance throttle enhancers put complete throttle response control at your fingertips. With throttle curves designed to provide a more exciting ride, these innovative optimizers deliver fully customizable power with a simple knob that lets you switch between multiple modes and throttle intensity on-the-fly. Installation is easy—completely plug-and-play with automatic setup sequence, and a magnetic A/C vent mount. Also, Hypertech REACT throttle enhancers will not void your factory warranty. Order the model recommended for your specific vehicle. Features of Performance throttle enhancers: * Modes: Track, Sport, Street, Economy, Stock * Pressing the knob clicks between each drive mode curve * Rotating the knob up increases throttle intensity, rotating down decreases throttle intensity * On-the-fly adjustments * LED setting indicators * Multi-level safety protection—incorporates multiple checks of the accelerator pedal signals coming and going from the microprocessor inside * Custom tuning software * Internet updateable
( 2 )
$299.95
Beck/Arnley ABS speed sensors supply information regarding wheel speed to the ABS computer. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, then the computer modulates the anti-lock feature until the speeds are equal again.
Not Yet Reviewed
$252.99
On Sale
Must-haves for off-roaders--Hypertech REACT Off-Road throttle enhancers put complete throttle response control at your fingertips. With throttle curves specifically designed to provide better power delivery in your off-road vehicle in various terrains, these innovative optimizers deliver fully customizable power with a simple knob that allows you to switch between multiple modes and throttle intensity on-the-fly. Installation is easy—completely plug-and-play with automatic setup sequence, and a magnetic A/C vent mount. Also, Hypertech REACT throttle enhancers will not void your factory warranty. Features of Off-Road throttle enhancers: * Modes: Mud/Sand, Street, Economy, Crawl, Stock * Mud/Sand curve brings the power on quickly to help clear the tires out and get you going * Crawl curve smooths the pedal response to allow even power delivery over the roughest terrain * Street and Economy curves allow you to make the best of your rig on the street too * Pressing the knob clicks between each drive mode curve * Rotating the knob up increases throttle intensity, rotating down decreases throttle intensity * On-the-fly adjustments * LED setting indicators * Multi-level safety protection--incorporates multiple checks of the accelerator pedal signals coming and going from the microprocessor inside * Custom tuning software * Internet updateable
( 1 )
$299.95
On Sale
Hypertech REACT Tow throttle enhancers put complete throttle response control at your fingertips. With throttle curves designed to improve the power delivery when you're towing or hauling, these innovative optimizers deliver fully customizable power with a simple knob that allows you to switch between multiple modes and throttle intensity on-the-fly. Installation is easy—completely plug-and-play with automatic setup sequence, and a magnetic A/C vent mount. Also, Hypertech REACT throttle enhancers will not void your factory warranty. Order the model recommended for your specific vehicle. Features of Tow throttle enhancers: * Multiple Performance Modes Track, Sport, Street, Economy, Stock * On-The-Fly adjustments * LED setting indicators * On-the-fly adjustments * Multi-level safety protection—incorporates multiple checks of the accelerator pedal signals coming and going from the microprocessor inside * Custom tuning software * Internet updateable
( 1 )
$299.95
BD Diesel throttle sensitivity boosters are designed to achieve quicker acceleration via increased throttle reactiveness. By reducing pedal lag, you force your performance curve to occur sooner and achieve quicker turbocharger spooling. BD Diesel boosters feature an easy plug-and-play installation using factory connections, and they're adjustable to boost signals by 50 or 100 percent.
( 9 )
$295.95
Ride height sensors determine vehicle height. They can wear out and are vulnerable to damage from road debris, accidents, water, and salt intrusion. Arnott aftermarket ride height sensors are designed to level your vehicle by measuring the varying distances between the road and the vehicle's chassis. The ECU is provided with this information and sends a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Arnott ride height sensors are manufactured with quality components, lab tested up to 1 million cycles, and offer plug-and-play installation to restore your vehicle's ability to respond to road conditions, ensuring comfort and capability for a premium ride. Available for numerous applications, select the sensor designed for your vehicle.
Not Yet Reviewed
$265.38
—
$358.93
Ride height sensors can wear out and are vulnerable to damage from road debris, accidents, water, and salt intrusion. By replacing faulty sensors, you can prevent further damage to your vehicle's air suspension system. Arnott suspension ride height sensors are manufactured from quality components to restore the vehicle's ability to respond to road conditions, and increase comfort and dynamic capability for a premium ride. Their aftermarket ride height sensors level your vehicle by measuring the varying distances between the road and the vehicles chassis. The sensors provide your vehicle's Electronic Control Unit (ECU) with the information and send a signal to the air suspension compressor to increase or decrease the air in the air struts appropriately. Choose the sensor designed for your vehicle.
Not Yet Reviewed
$352.53
—
$364.02
Standard Motor Products ride height sensors are direct-fit OE replacements that ensure ease of installation. These sensors are made of high-quality materials to withstand extreme conditions, and they undergo extensive testing to ensure reliability. Order the model recommended for your vehicle application.
Not Yet Reviewed
$254.99
—
$335.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$276.99
—
$390.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
