Availability
Showing In Stock Items. Show All 25 Items.
HalTech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles
( 2 )
$375.00
Timing is everything. Holley EFI cam sync sensor kits provide the components to set your engine's power curve for optimum performance. The complete kits include a sensor, stainless steel flying magnet target with high-temperature rare earth magnet, connector, pins, seal, and washers. The kits are also available without the flying magnet target and washer; plus, the components are also available individually. Eliminate ignition timing variations and mis-adjustments with Holley cam sync sensor kits. Features include: * 3-wire Hall effect camshaft sensor generates digital square-wave signal * Can work with internal and external cam drive systems (i.e. gear, chain, and belt drive systems with or without timing cover) * Can operate from 8 to 20 V * M12x1 threads for finer gap adjustability; approximately 1.5 in. length
Not Yet Reviewed
$262.95
MSD Power Grid wide band oxygen sensor modules provide valuable air/fuel ratio data to your MSD Power Grid, data logger, or air/fuel ratio gauge. These modules feature: * Plug-and-play with MSD Power Grid * Easy set-up; no free-air calibration required * Completely sealed unit for durability in race environments * Bosch 4.9 oxygen sensor * 0 to 5 V output to run an air/fuel gauge or data logger * Dual-color LED provides on board diagnostics * Multiple modules can be used on a single Power Grid * Data logs air/fuel ratio and heater voltage * Fuel calibration options for gasoline, methanol, ethanol, E85, propane, and diesel * Custom fuel calibration option can be programmed by user
( 2 )
$334.95
A cam sync signal is required to run sequential fuel injection, and Holley camshaft sync kits are ready to set the firing order for top performance. Available in a choice of kits for standard cam height small block and big block Chevys, as well as raised cam height big blocks, these Holley kits fit Jesel and other external, dry timing belt cam drive systems. They provide a plug-and-play cam position signal to Holley EFI systems, but are also compatible with any EFI system which can read a digital, square-wave cam input signal. All of the kits feature unique T-nut and bracket designs that allow for complete sensor adjustment from the outside of the bracket with a single jam nut. Let your ECU know which cylinder is number one in the firing order with a signal from Holley Chevy camshaft sync kits. Holley kits include: * 3-wire H all-effect sensor (8 to 20 V) * Anodized billet aluminum bracket * Mounting hardware * Mating connector * Stainless steel 1/4 in.-20 "flying magnet" screw with a high-temperature, rare-earth magnet
Not Yet Reviewed
$349.95
—
$368.95
For years, if you wanted to use your dyno's powerful data acquisition system to display and record air/fuel ratios, you had to piece together an external standalone air/fuel meter, along with a custom-made wiring harness to get a proper signal to record. Seeing the need for an easier way, FAST developed a plug-and-play kit that makes it easy for owners of any SuperFlow 902, AutoDyn, or CycleDyn dyno to measure their test engine's air/fuel ratio. FAST wideband O2 sensor kits for SuperFlow dynos include a wideband oxygen sensor and an O2 sensor processing unit that plugs directly into the AMP-style connector harness on the dyno. Once you configure the dyno's analog channel for the fuel you're using, the dyno will begin to display and record the air/fuel ratio. Making it easy to use was a priority for FAST, so these sensor kits utilize fully automatic sensor calibration. No need to manually "free-air" calibrate the sensor; just turn the power on, and in just seconds these FAST units output an accurate and consistent air/fuel signal. Additionally, each sensor kit is a standalone unit—so using multiple kits for measuring all your engine's cylinders is a breeze. With industry leading plug-and-play installation, accuracy, and ease of use, it's clear that FAST wideband O2 sensor kits for SuperFlow dynos are the best choice for serious engine tuners.
Not Yet Reviewed
$335.95
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
These Demon Carburetion TPS kits are designed for use with electronic transmissions that require a TPS signal. They include a TPS switch, billet bracket, connector rod, and adapter lever. The kits install easily on your Demon Carburetion carburetor with no modifications.
( 1 )
$299.95
KW cancellation kits eliminate persistent trouble codes that exist when upgrading a suspension on a vehicle with electronically regulated dampers. KW offers the only solutions whereby the serial damper regulation is shut down and, at the same time, trouble codes get avoided. The functioning of your control unit remains completely intact. Upgrade your advanced suspension the easy way with an assist from KW cancellation kits, available for a variety of applications, such as Chevy Corvette and Audi models.
Not Yet Reviewed
$493.95
Get that stout performance you've always craved out of your automatic transmission with the installation of a B&M remote throttle position sensor! Designed for use with carbureted engines, B&M throttle position sensors are for use with B&M's automatic transmission controllers (sold separately). B&M throttle position sensors feature a simple three-wire design, making it easier to install. The adjustable cable allows for various mounting locations on your engine, and the supplied bracket provides a place to mount the throttle cable, as well as providing a more professional looking appearance.
( 2 )
$326.95
You have an alternative choice for flex fuel sensors--AEM Electronics ethanol content sensors. While most gas stations label their flex fuel as E85 (85 percent ethanol/15 percent gasoline), the actual content could be quite different. AEM sensors deliver the ability to determine the composition of the fuel blend pumped into your vehicle at any given time. They measure content percentage and fuel temperature allowing users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize their engine's tuning calibration for fuel ethanol content. These kits include plug and pins for electrical connections, as well as either -6AN or hose barb fittings (depending on kit chosen) for integration into the fuel system.
( 4 )
$328.95
Lingenfelter Performance Engineering mass airflow sensors are large-diameter and low-restriction. These assemblies will provide accurate airflow--even at high power levels. Recommended for supercharged, turbocharged, and other high output engine applications, these 100mm tube MAFs are precision CNC-machined from aluminum, and then anodized black for durability and appearance. Replace your GM frequency-type sensor with Lingenfelter mass airflow sensors.
( 1 )
$332.45
JMS Chip PedalMAX drive-by-wire boosters install in just minutes and will help erase pedal turbo-lag, as well as increase throttle reaction and improve acceleration. These throttle response enhancers change the way your gas and diesel vehicles respond--with improved low- and mid-range horsepower, torque, and shift feel of your automatic; they also eliminate stalling on manual vehicles when accelerating. These drive-by-wire boosters have a rugged, waterproof design and offer a simple plug-and-play installation. If you hit the pedal for "take-off" but are unhappy with the delay in your stock throttle, these JMS Chip PedalMAX throttle response parts are the solution. Order the booster recommended for your vehicle.
( 55 )
$274.22
—
$289.75
MSD Power Grid wide band oxygen sensors are replacements for the MSD Power Grid wideband O2 sensor module. The LSU 4.9 is the robust design combined with a high production quality standard. They will also work with Holley Sniper EFI and Terminator X Systems. MSD Power Grid wide band oxygen sensors feature anti-seize pre-applied to sensor threads for an easy install and removal, and they are compatible with gasoline, methanol, ethanol, E85, propane, and diesel.
( 1 )
$299.95
K&N throttle control modules are designed to improve throttle response and acceleration, as well as pedal sensitivity without modifying factory ECU settings. These modules process input data from the gas pedal and bypasses the factory signal to your vehicle's ECU, sending a modified signal directly to the throttle body. This creates an increase in throttle responsiveness that will make your car feel like a whole new machine. Features and benefits: * Easy plug-and-play installation * No software required and can be tuned on the go * Sends a modified signal directly to the throttle body * Includes the module, wiring harness, adjustable dial, hardware, and instructions
Not Yet Reviewed
$280.09
Take your throttle sensitivity adjustment wireless! Superchips Amp'd 2.0 throttle booster with Bluetooth removes throttle response delays, instantly putting you in total control of your vehicle's throttle response. The wireless Bluetooth switch is an industry-exclusive feature, and the Amp'd 2.0 app provides unparalleled control over your throttle experience. The throttle boosters are pre-loaded with five preset throttle curves and thousands of custom curve possibilities. You paid for a powerful vehicle, and you should have full control over how it drives. Take control with Amp'd 2.0! Features: * Includes mobile app for Android/IOS. * Includes coverage on late-model gas and diesel equipped vehicles * GM/Ford/Dodge/Ram/Toyota/Jeep coverage and more * Increases accelerator pedal response over stock * Reduces dead pedal feeling (acceleration lag) * Works with stock or modified vehicles * Build turbo boost quicker on turbocharged vehicles * Five preset throttle curves * Three customizable throttle slots * Easy installation
( 2 )
$279.95
Banks Power PedalMonster is the first OBD-II connected throttle sensitivity controller for gas and diesel vehicles. Controlled via Banks iDash or mobile app, PedalMonster is the only module of its kind to offer safety features like ActiveSafety, Reverse Safety, and Adjustable Low-Speed Trim. Select the model that best suits your application. Product features: * City, Sport, and Track modes, each with 10 sensitivity levels * OBD-II connected * ActiveSafety failsafe circuitry with Health Monitoring * Reverse safety returns pedal to stock in reverse gear * Adjustable Low-Speed Trim controls how fast sensitivity is added at slow speeds * Powered by +12 V via OBD, not low-overhead pedal circuit * Controlled by iDash DataMonster, iDash SuperGauge and mobile app * View PedalMonster's activity in real-time via iDash and mobile app * Simple plug-and-play installation * Warranty friendly. Does not leave footprint after removal
( 38 )
$316.00
Davies Craig puts you in total control of your engine cooling with their electric water pump and controller combos. These economical packages deliver a selection of choices; all include lightweight EWP pumps that will cool better, while providing more power, torque, and fuel economy. The controller features a prominent blue LCD screen, and has features to manage the efficient operation of both your electric water pump and engine fan—to eliminate "heat soak" and extend the life of your engine. The pumps are available in aluminum alloy or nylon construction, as well as different flow rates to best fit your specific application. Upgrade your belt-driven, mechanical pump and engine thermostat with the improved performance of Davies Craig electric water pump and controller combos.
( 5 )
$378.93
JMS Chip ThrottleMax throttle body swap controllers allow you to convert your Mustang's digital throttle body to an analog style throttle body. These kits include the wiring harness as well as the controller to make for an easy conversion.
( 1 )
$399.75
Dorman exhaust gas temperature sensors make replacing seized or damaged sensors a breeze. These EGT sensors are direct replacements and come with a bung repair kit just in case the bung is damaged during removal. This is a cost effective fix, instead of having to replace the entire exhaust pipe. They feature quality engineering and are backed by decades of automotive experience.
Not Yet Reviewed
$394.99
MSD Atomic TBI throttle position sensor modules are designed for use with the MSD Atomic throttle body fuel injection system. They connect inline to the Atomic TBI communication network and provide a common 0-5 V throttle position output signal required for the operation of an electronic overdrive transmission or other accessory.
( 3 )
$299.95
The engineers at BBK have added to their arsenal of EFI performance parts with these mass airflow sensors. Starting with an all-new 356 aluminum casting, each unit is powdercoated and then fully CNC-machined to exact specifications. They are then fitted with one of BBK's new electronically calibrated mass air sensor modules (except where noted), to ensure an accurate air/fuel ratio for the best possible performance potential. Dyno testing has shown horsepower gains, while maintaining an accurate air/fuel ratio.
( 23 )
$269.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
