Availability
K&N throttle control modules are designed to improve throttle response and acceleration, as well as pedal sensitivity without modifying factory ECU settings. These modules process input data from the gas pedal and bypasses the factory signal to your vehicle's ECU, sending a modified signal directly to the throttle body. This creates an increase in throttle responsiveness that will make your car feel like a whole new machine. Features and benefits: * Easy plug-and-play installation * No software required and can be tuned on the go * Sends a modified signal directly to the throttle body * Includes the module, wiring harness, adjustable dial, hardware, and instructions
Not Yet Reviewed
$314.99
Dorman throttle body modules are remanufactured units that are thoroughly tested to restore proper performance in your vehicle. Correct throttle body operation ensures maximum efficiency, and Dorman modules are direct replacements (specific vehicle applications) made from high-grade electronic components that can withstand temperature fluctuations and prevent future failures.
Not Yet Reviewed
$268.99
KW cancellation kits eliminate persistent trouble codes that exist when upgrading a suspension on a vehicle with electronically regulated dampers. KW offers the only solutions whereby the serial damper regulation is shut down and, at the same time, trouble codes get avoided. The functioning of your control unit remains completely intact. Upgrade your advanced suspension the easy way with an assist from KW cancellation kits, available for a variety of applications, such as Chevy Corvette and Audi models.
Not Yet Reviewed
$493.95
Standard Motor battery current and voltage sensors measure the temperature of the battery, regulating voltage to the vehicle charging system to function properly at all times. Standard Motor ensures these sensors are direct-fit, by testing every unit before it is packaged. These sensors are unrivalled for fit, form, function, and quality. Replace your worn or faulty battery current and voltage sensor with one from Standard Motor.
Not Yet Reviewed
$259.99
—
$443.99
Mopar Replacement ABS modules are genuine OE replacements. That means your Chrysler, Dodge, Fiat, Jeep, and even some Mitsubishi models will receive the perfect part to repair and/or restore performance and safety, just as it should be. These modules are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Order the ABS module recommended to fit your application.
( 14 )
$257.99
—
$556.99
It's bad news when your wheels lock up and throw you into a skid. The problem could be with your anti-lock braking system. Dorman offers a full line of economical ABS control modules for use on dozens of makes/models. These units are remanufactured from quality materials and fully tested for performance. The modules read the data from your speed sensor and send the correct pressure to each wheel--enabling you to maintain steering control and stop quickly under most conditions. Dorman plug-and-play replacements are upgraded with durable main pump transistors to avoid pump relay burnout. When the ABS light on your dash comes on, retain control of the anti-lock brakes with a newer, dependable module from Dorman.
( 42 )
$298.99
Mopar Replacement stability system control modules are genuine OE-replacements. That means your Chrysler, Dodge, Plymouth, Jeep, and even some Mitsubishi models will receive the perfect part to repair and/or restore performance and safety, just as it should be. These modules are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value.
Not Yet Reviewed
$522.99
Mopar Replacement ammonia module sensors offer high-quality, along with an original equipment fit and function to keep your favorite Dodge or Ram rolling down any road you choose to travel. When you need to replace and you want the proper fit, correct calibration, and reliable operation choose genuine Mopar Replacement ammonia module sensors.
Not Yet Reviewed
$436.99
MSD Power Grid wide band oxygen sensor modules provide valuable air/fuel ratio data to your MSD Power Grid, data logger, or air/fuel ratio gauge. These modules feature: * Plug-and-play with MSD Power Grid * Easy set-up; no free-air calibration required * Completely sealed unit for durability in race environments * Bosch 4.9 oxygen sensor * 0 to 5 V output to run an air/fuel gauge or data logger * Dual-color LED provides on board diagnostics * Multiple modules can be used on a single Power Grid * Data logs air/fuel ratio and heater voltage * Fuel calibration options for gasoline, methanol, ethanol, E85, propane, and diesel * Custom fuel calibration option can be programmed by user
( 2 )
$334.95
MSD Atomic TBI throttle position sensor modules are designed for use with the MSD Atomic throttle body fuel injection system. They connect inline to the Atomic TBI communication network and provide a common 0-5 V throttle position output signal required for the operation of an electronic overdrive transmission or other accessory.
( 3 )
$299.95
Get rid of laggy acceleration and improve throttle response with AEM Electronics throttle control modules! Utilizing five preset and three customizable throttle curve profiles, the downloadable TCM app for iOS and Android phones can easily and wirelessly tailor your desired driving experience. Installation takes only minutes and plugs inline between your vehicle's accelerator pedal harness—no additional wiring is required. The user-friendly and intuitive AEM (TCM) downloadable app puts you in control, allowing you to dial-in your throttle curve just the way you want! Product features and benefits: * Quick and easy plug-and-play design that is removable without a trace * Works on gas, diesel, alternative fuel and Hybrid vehicles * Improves throttle response and transforms the feel of the vehicle * Multiple switchable profiles including various sport modes, eco modes, and custom maps * Bluetooth iOS and Android mobile app * Custom throttle mapping allows you to perfectly tune your throttle pedal * Works on stock and modified vehicles with electronically controlled throttle * No clunky boxes, wires, or controllers like other devices * Connects to the throttle harness, leaving your OBD-II port free
Not Yet Reviewed
$271.95
FAST XFI wideband auxiliary air/fuel ratio modules include a wideband oxygen sensor and an O2 sensor processing unit that plugs directly into your FAST XFI harness. Making it easy to use was a priority for FAST, so these sensor kits utilize fully automatic sensor calibration. No need to manually "free-air" calibrate the sensor; just turn the power on, and in just seconds these FAST units output an accurate and consistent air/fuel signal. Additionally, each sensor kit is a standalone unit—so using multiple kits for measuring all your engine's cylinders is a breeze. With industry-leading plug-and-play installation, accuracy, and ease of use, it's clear that FAST XFI wideband auxiliary air/fuel ratio modules are the best choice for serious engine tuners.
Not Yet Reviewed
$285.95
MSD Power Grid wide band oxygen sensors are replacements for the MSD Power Grid wideband O2 sensor module. The LSU 4.9 is the robust design combined with a high production quality standard. They will also work with Holley Sniper EFI and Terminator X Systems. MSD Power Grid wide band oxygen sensors feature anti-seize pre-applied to sensor threads for an easy install and removal, and they are compatible with gasoline, methanol, ethanol, E85, propane, and diesel.
( 1 )
$299.95
aFe Sprint Boosters offer your ride an adrenaline kick! Designed for ETC systems, or drive-by-wire, these simple-to-install power modules plug into the OE connector located behind the accelerator pedal--no wires to cut. aFe Sprint Boosters deliver improved acceleration and reduce throttle response time. They will not affect your vehicle's electronic system and offer three settings for better drivability: factory (off), sport (green), and race (red). Raise the performance level of your ride with aFe Sprint Boosters.
( 20 )
$311.85
JMS Chip PedalMAX Terrain drive-by-wire boosters are very similar to the standard PedalMAX series but have two added features: They have the ability to reduce or increase the throttle sensitivity (reduction feature works great for inexperienced drivers or for poor traction conditions); and they can save your knob setting--just unplug the knob and it's saved! Now you can match your throttle response to your exact terrain with JMS Chip PedalMAX Terrain drive-by-wire boosters. Order the model recommended for your vehicle.
( 1 )
$309.75
Dorman NOx (Nitrogen Oxide) sensors are high-temperature designs that detect NOx levels in diesel-fueled vehicles that must comply with state emissions regulations. As state emissions requirements become more demanding for diesel vehicles, it is imperative to have a quality sensor to notify the driver when high amounts of NOx levels are in the engine. Bring your vehicle up to compliance with Dorman NOx sensors.
( 2 )
$284.99
JMS Chip PedalMAX drive-by-wire boosters install in just minutes and will help erase pedal turbo-lag, as well as increase throttle reaction and improve acceleration. These throttle response enhancers change the way your gas and diesel vehicles respond--with improved low- and mid-range horsepower, torque, and shift feel of your automatic; they also eliminate stalling on manual vehicles when accelerating. These drive-by-wire boosters have a rugged, waterproof design and offer a simple plug-and-play installation. If you hit the pedal for "take-off" but are unhappy with the delay in your stock throttle, these JMS Chip PedalMAX throttle response parts are the solution. Order the booster recommended for your vehicle.
( 55 )
$289.75
Standard Motor nitrogen oxide sensors are designed to detect NOx levels in diesel-fueled vehicles that must comply with state emissions regulations. These NOx sensors are direct-fit OE replacements for the originals, ensuring proper fit, form, and function, as well as ease of installation. The high-temperature sensors have a plug-and-play design, so no additional programming is required. Order the model recommended for your application.
( 1 )
$406.99
—
$500.99
Banks Power PedalMonster is the first OBD-II connected throttle sensitivity controller for gas and diesel vehicles. Controlled via Banks iDash or mobile app, PedalMonster is the only module of its kind to offer safety features like ActiveSafety, Reverse Safety, and Adjustable Low-Speed Trim. Select the model that best suits your application. Product features: * City, Sport, and Track modes, each with 10 sensitivity levels * OBD-II connected * ActiveSafety failsafe circuitry with Health Monitoring * Reverse safety returns pedal to stock in reverse gear * Adjustable Low-Speed Trim controls how fast sensitivity is added at slow speeds * Powered by +12 V via OBD, not low-overhead pedal circuit * Controlled by iDash DataMonster, iDash SuperGauge and mobile app * View PedalMonster's activity in real-time via iDash and mobile app * Simple plug-and-play installation * Warranty friendly. Does not leave footprint after removal
( 37 )
$319.00
JET Powr-Flo mass airflow sensors are designed to deliver improved horsepower, torque, and mileage from your car, truck, or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET mass air sensors provide airflow increases of up to 45 percent and installs in 10 minutes or less. They are compatible with other aftermarket upgrades including but not limited to: Performance tuning (chips, modules, etc.), exhaust modifications (cat-back, headers, etc.), cold air intakes, and ignition systems. Order the model designed to fit your needs.
( 236 )
$292.46
—
$337.49
Summit Bucks
ACDelco GM Genuine Parts nitrogen oxide sensors detect the NOx content of exhaust gas from diesel engines, and are factory-recommended replacements. The information from these sensors is used by the engine control module (ECM) to adjust various parameters and reduce harmful emissions. These OE sensors are manufactured to fit specific applications, providing the same performance, durability, and service life you expect from General Motors.
( 9 )
$250.99
—
$356.99
The engineers at BBK have added to their arsenal of EFI performance parts with these mass airflow sensors. Starting with an all-new 356 aluminum casting, each unit is powdercoated and then fully CNC-machined to exact specifications. They are then fitted with one of BBK's new electronically calibrated mass air sensor modules (except where noted), to ensure an accurate air/fuel ratio for the best possible performance potential. Dyno testing has shown horsepower gains, while maintaining an accurate air/fuel ratio.
( 23 )
$269.99
—
$369.99
Summit Bucks
ACDelco GM Genuine Parts mass airflow sensors are a key part of the engine management system, and they are GM-recommended replacements for your vehicle's original component. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. These original equipment mass air flow sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 21 )
$254.99
—
$276.99
Mopar Replacement nitrogen oxide sensors detect the amount of NOx gas being emitted from diesel engines. Each sensors information is used by your vehicles engine control module (ECM) to adjust various parameters and reduce those harmful exhaust gas emissions. They are manufactured to OE specifications and designed to fit your specific Mopar application.
Not Yet Reviewed
$419.99
—
$501.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
