Availability
Showing In Stock Items. Show All 28 Items.
These AEM Electronics coolant temperature sensor kits allow you to monitor the temperature of your coolant. They include an aluminum weld-in bung, a connector plug with a flying lead, and a sensor.
( 6 )
$54.45
Summit Racing™ oxygen sensor service kits include three O2 sensor sockets in multiple designs for use with many different applications of both heated and non-heated oxygen sensors. Each one features steel construction and a black phosphate finish. Two thread chasers are also included to remove rust, clean, and repair damaged threads. Summit Racing™ oxygen sensor service kits are packaged in a blow-molded case for storage and easy portability. 5-piece O2 kits contain: * 7/8 in. (22mm) offset oxygen sensor socket * Low-profile 7/8 in. (22mm) offset oxygen sensor socket * 7/8 in. (22mm) long oxygen sensor socket * M12 x 1.25mm thread chaser * M18 x 1.5mm thread chaser
Not Yet Reviewed
$29.99
On Sale
MSD Atomic EFI TBI fuel pressure sensor kits are replacement support components designed to maintain your throttle body's performance. Atomic EFI systems by MSD were designed with two goals—to simplify EFI and improve overall performance. Simplicity is achieved through less wiring and fewer connections, and readily available replacement components such as these Atomic EFI TBI fuel pressure sensors. These support component kits include senor and O-rings to make it easy to uphold optimum performance.
Not Yet Reviewed
$87.15
$47.93
On Sale
If you require additional outputs and/or upgraded hardware over existing sensors, AEM Electronics MAP sensor kits will put a smile on your face. Their quality construction and precision accuracy make them a perfect choice for demanding performance applications.
( 12 )
$87.15
$56.65
FiTech oxygen sensor bung assemblies offer a no-weld installation. Oxygen sensors are vital components that help you adjust to your engine's fuel/air ratio via the electronic control unit (ECU). With these easy-to-install kits, you're on your way to improved performance. Simply drill a hole in your exhaust, install the gasket and sensor fitting, and then secure with the band clamps. Voila! Now you can install an oxygen sensor without welding in a bung, thanks to FiTech.
( 22 )
$21.00
Lowdoller Motorsports turbo intake air temperature sensors offer benefits including fast and accurate readings, enhanced engine safety, and better tuning control. These sensors provide the ECU (Engine Control Unit) with precise and immediate temperature data, which is especially critical in turbo and supercharged engines where air temperatures can fluctuate significantly. By accurately measuring the temperature and, by extension, the density of the air intake, the engine control unit can make real-time adjustments to fuel injection. This ensures the engine maintains the ideal air/fuel ratio for maximum power and efficiency under operating conditions.
Not Yet Reviewed
$36.00
Artec Industries ABS reluctor rings provide your on-board computer with correct data from the anti-lock braking system, eliminating codes and limp mode issues. These tone rings are made from quality steel and available in a range of tooth sizes to fit a variety of models. They're built specially for the axle swap applications on your Jeep JK.
Not Yet Reviewed
$50.59
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. Camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Standard Motor Products replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.
( 13 )
$46.38
Dorman has you covered on all of your vehicle speed sensor needs. The speedometer gauge on your dashboard is getting its data from somewhere--and these are the units. Dorman takes pride in having produced high-quality OE replacement parts with state-of-the-art equipment since 1918. Take advantage of having access to an industry-leading brand originally intended only for dealers. Dorman vehicle speed sensors are available for many makes and models of cars and trucks. Match your vehicle specs with the sensor that'll get you back up to speed!
( 7 )
$33.99
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$36.99
Griffin Radiator coolant temperature sensors are the replacements needed for your Griffin fan wiring kit. Don't take a chance of potential overheating; replace your aging sensor with the perfect fit of Griffin Radiator coolant temperature sensors.
( 4 )
$52.00
Holley's Terminator X and Terminator X Max give you complete control of your engine, self-learning fuel strategies, and the race-winning technology of Holley EFI at a budget-friendly price. To maintain the ultimate performance Holley also offers service parts. Holley Terminator X MAP sensor adapter sets are fittings for different vacuum hose diameters. They are identical to the ones supplied with all Terminator X or Terminator X Max EFI kits. The set includes 1/8 in., 3/16 in., and 1/4 in. hose barb adapters that will provide the same fit and function as the originals.
Not Yet Reviewed
$21.03
A bit touchy? JMS Chip PedalMAX remote throttle knobs override the settings of your JMS unit. Simply plug them in and adjust the sensitivity of your throttle. The kits include a remote voltage knob and wire.
( 4 )
$49.75
Davies Craig coolant temperature sensors are designed to be used with their inline adapters. Keep your readings accurate and your performance optimal with sensors from Davies Craig.
( 4 )
$48.82
Dorman ABS speed sensors are designed to supply information regarding wheel speed to the ABS computer. One of the most common omissions in maintaining a modern anti-lock brake system (ABS) is checking out the speed sensors. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again.
( 36 )
$49.99
ACDelco offers air charge temperature sensors for thousands of applications from the 1980s and up. These direct-fit OE replacements install easily and deliver factory-style performance. Maintaining the right temperature for the correct mix of air and fuel is crucial to engine efficiency. Order the sensor recommended for your vehicle.
( 20 )
$45.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
