Availability
Showing In Stock Items. Show All 52 Items.
Fleece Performance universal coolant level float switches feature stainless steel bodies with 1 in. NPT thread, 8 in. harness, and 2-pin metripack connector. They have a 3/4 in. float travel and are for use with the Fleece's coolant tank or custom configuration tanks with 1 in. NPT bung.
Not Yet Reviewed
$39.99
These Standard Motor Products replacement coolant level sensors provide the PCM with an analog input signal, along with an oxygen sensor, to go into the closed loop mode of controlling the fuel mixture. They are designed to provide actual engine temperature information to the PCM. The PCM then feeds the sensors a fixed reference voltage of usually 5 volts when the engine is on. The resistance in the sensors is high when cold, and drops as the sensors warm up, to alter the voltage signal back to the PCM. Are you experiencing temperature problems with your vehicle? Try one of these Standard Motor Products replacement coolant level sensors to eliminate any chance of problems.
( 4 )
$36.99
Don't get heated up over inaccurate readings. When your sensors go bad and give you false readings of low coolant warnings, get Crown coolant level sensors. These replacements are available for the vehicles noted. These OE-style components from Crown monitor the internal temperature of the engine accurately.
Not Yet Reviewed
$22.99
—
$25.99
Standard Motor battery current and voltage sensors measure the temperature of the battery, regulating voltage to the vehicle charging system to function properly at all times. Standard Motor ensures these sensors are direct-fit, by testing every unit before it is packaged. These sensors are unrivalled for fit, form, function, and quality. Replace your worn or faulty battery current and voltage sensor with one from Standard Motor.
Not Yet Reviewed
$35.99
—
$38.99
Hella engine coolant level sensors will maintain your vehicle's information process of detecting the engine's operating temperature. Increased fuel consumption, higher idle speeds, and poor starting could be signaling a problem. Hella sensors provide you with quality direct-fit options that will look and function just as the originals to resolve these issues and restore your car's performance.
Not Yet Reviewed
$26.99
—
$36.99
Weak batteries are one of the main reasons why vehicles break down, so efficient energy management is of great importance. Hella intelligent battery sensors (IBS) reliably and accurately measure battery voltage, current, and temperature parameters, sending the information to your vehicle's computer system to ensure your battery is functioning properly and your vehicle is running smoothly. Make a smart choice for your vehicle; choose Hella IBS. Benefits: * Reliable measurement of the parameters: state of charge (SOC), battery health (SOH), and calculation of expected starting ability (SOF) * Versatile design and support for numerous battery models * Direct integration in the vehicle electrical system via the LIN protocol * Precise shunt-based measurement of current within high-voltage applications and batteries with insulation * Vehicle-specific design for a 1:1 replacement
Not Yet Reviewed
$41.99
—
$54.99
OMIX-ADA checks the pulse of your Jeep's braking with their ABS wheel speed sensors. Offering an OE-fit and function, these sensors will detect differences in tire rotation, letting your ABS system engage when needed to control braking. OMIX-ADA ABS wheel speed sensors will help maintain safe braking in your Jeep.
Not Yet Reviewed
$42.99
Available for a variety of European makes and models, URO Parts coolant level sensors meet or exceed OEM specifications for dependable, accurate, and maintenance-free operation. Don't take chances with aging or faulty sensors that provide inaccurate information to the vehicle's systems—trust the high-quality replacement coolant level sensors designed for your specific vehicle.
Not Yet Reviewed
$23.99
On Sale
MSD offers replacement wiring harnesses for the Power Grid Dual NTK wideband oxygen module—a dual channel air/fuel ratio (AFR) system designed to interface with the Power Grid (P/N 7730) to monitor and record the AFR of internal combustion engines. The oxygen sensor module is capable of measuring AFR as low as ? = 0.5 (7.35:1 gasoline AFR equivalent). The AFR range is configurable using the MSDView software in conjunction with the Power Grid Controller (P/N 7730). Excellent MSD range of the NTK sensor gives each unit the ability to accurately monitor AFR's even on alcohol cars. The MSD wideband oxygen sensor module also provides a 0.5-4.5 VDC analog output proportional to the AFR. This analog output can be sent to a gauge or a data acquisition system. A dual-color LED provides the system status at a glance. (To provide accurate backpressure compensated AFR readings on turbocharged applications, the addition of an Exhaust Pressure Module, part number 7767, is required.) MSD can provide a replacement main harness, sensor 1 harness, or sensor 2 harness for your application. Order the model needed to restore proper performance to your vehicle.
( 1 )
$65.35
$35.94
The MSD NTK wideband 02 module can be expanded to operate with a second monitoring channel and MSD offers several components for channel 2 operation. When you need more length MSD oxygen sensor extension harnesses provide 18 in. of length for Sensor 2 of your NTK module.
Not Yet Reviewed
$46.10
ACDelco throttle position sensors electronically inform the powertrain control module (PCM) of the throttle valve angle. The PCM uses this input to regulate your fuel and ignition systems. These replacement sensors are available in dozens of models for fitment on thousands of vehicles spanning a half-century. For the proper fit and performance, order the ACDelco throttle position sensor recommended for your application.
( 19 )
$50.99
—
$52.99
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 23 )
$21.99
—
$47.99
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 107 )
$22.99
—
$53.99
Summit Bucks
Delphi ignition knock sensors maximize your engine's performance--regardless of fuel quality! Their knock sensors hear various knock frequencies under many operating conditions to detect shifts and provide an accurate signal to your engine control module. The sensors meet or exceed OE requirements and reduce potential damage to your internal engine components. Knock, knock-- who's there? Engine. Engine who? Engine gonna buy me a Delphi ignition knock sensor? Listen to your engine--choose Delphi.
( 29 )
$20.99
—
$47.99
ACDelco has you covered on all of your vehicle speed sensor needs. The speedometer gauge on your dashboard is getting its data from somewhere--and these are the units. The same signals are also used by multiple control modules to adjust or perform functions, such as cruise control, steering assist, and climate control. These GM-recommended replacement sensors are available for many makes and models of cars and trucks. Match your vehicle specs with the model that'll get you back up to speed!
( 4 )
$24.99
—
$46.99
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 104 )
$20.99
—
$45.99
ACDelco GM Genuine Parts fuel pressure sensors send readings to the powertrain control module, which uses the data to adjust fuel delivery parameters. These true GM OE sensors are factory-recommended replacements, manufactured to provide the performance, durability, and service life you expect from General Motors. Monitor your fuel system accurately with the model designed for your application.
( 3 )
$22.99
—
$42.99
ACDelco GM Genuine Parts camshaft position sensors are a GM recommended replacement ideal for many vehicles on the road today. They monitor the rotational position of the camshaft(s). These sensors provide a signal to the engine control module, which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. GM Genuine Parts camshaft position sensors have been manufactured to provide you with the performance, durability, and service life you expect from General Motors.
( 11 )
$21.99
—
$47.99
Dorman ABS speed sensors are designed to supply information regarding wheel speed to the ABS computer. One of the most common omissions in maintaining a modern anti-lock brake system (ABS) is checking out the speed sensors. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again.
( 36 )
$22.99
—
$51.99
That glowing light on the dash that says "ABS" isn't a reminder that your vehicle has this safety feature--it's a reminder that it isn't functioning properly. Crown Automotive ABS speed sensors are designed to the same specifications as the OE units for easy fitment and reliability. Each wheel has at least one sensor that monitors speed and sends that information to the control module, where the correct pressure is sent to ensure quick stopping without skidding. The dash light comes on to inform you that at least one sensor isn't working, and the ABS is turned off. Get the correct parts for the right locations with Crown ABS speed sensors.
( 2 )
$20.99
—
$52.99
ACDelco GM Genuine Parts vehicle speed sensors report vehicle speed to the instrument panel and engine control module, and are GM-recommended replacements for your vehicle's original components. The sensors signals are used by multiple control modules to adjust or perform functions, such as cruise control, steering assist, and climate control. These GM Genuine Parts vehicle speed sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 1 )
$23.99
—
$41.99
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$20.99
—
$55.99
Hitachi MAP sensors support accurate measurement for reliable engine performance. Typically found in the induction system of the engine, the manifold absolute pressure sensors help the engine control module to manage engine characteristics to achieve the most efficient and longest lasting results. The sensor works by sending electrical signals to the ECM within a specified voltage range created by highly sensitive and accurate piezoelectric crystals, which, when compressed by the pressure in the induction system, generates an electrical output. Designed to meet the exact needs of each specific vehicle, the Hitachi MAP sensors are the premium choice. Order the MAP sensor model designed for your application needs.
Not Yet Reviewed
$26.99
—
$47.99
URO Parts offers ABS speed sensors for countless import vehicles. The wheel speed sensors are a type of tachometer that measures the rotational speed of a wheel and passes it to your car's engine control module. These replacements are made from high-quality materials to resist heat and ozone, maximizing durability and vibration absorption. Their OE-style design supports factory anti-lock brake sensor function. Fitment is guaranteed, backed by a 24-month unlimited mileage warranty from URO. Order the model recommended for your application.
Not Yet Reviewed
$20.99
—
$33.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
