Availability
Showing In Stock Items. Show All 103 Items.
ACDelco throttle position sensors electronically inform the powertrain control module (PCM) of the throttle valve angle. The PCM uses this input to regulate your fuel and ignition systems. These replacement sensors are available in dozens of models for fitment on thousands of vehicles spanning a half-century. For the proper fit and performance, order the ACDelco throttle position sensor recommended for your application.
( 20 )
$50.99
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 24 )
$33.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 92 )
$35.99
—
$53.99
These Chevrolet Performance Parts MAF sensor housing adapters are designed to get your MAF sensor mounted properly. They are manufactured from quality materials and install onto the MAF sensor with no modifications.
( 8 )
$20.19
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 37 )
$20.99
—
$43.99
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 81 )
$47.99
—
$50.99
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$20.99
Hitachi offers mass air flow sensors for countless cars, trucks, and vans. These stock replacements are built to OEM specifications for performance and longevity. MAF sensors play a fundamental role in your vehicle, measuring the amount of air entering the internal combustion engine. Hitachi's quality control and attention to detail make their parts the go-to choice for many car manufacturers. Order the mass air flow sensor recommended for your application.
( 4 )
$34.99
—
$49.99
ACDelco offers air charge temperature sensors for thousands of applications from the 1980s and up. These direct-fit OE replacements install easily and deliver factory-style performance. Maintaining the right temperature for the correct mix of air and fuel is crucial to engine efficiency. Order the sensor recommended for your vehicle.
( 20 )
$23.99
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 175 )
$39.99
—
$52.99
ACDelco GM Genuine Parts vehicle speed sensors report vehicle speed to the instrument panel and engine control module, and are GM-recommended replacements for your vehicle's original components. The sensors signals are used by multiple control modules to adjust or perform functions, such as cruise control, steering assist, and climate control. These GM Genuine Parts vehicle speed sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 1 )
$41.99
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 107 )
$45.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$27.99
JBA oxygen sensor extension harness sets feature a direct plug-in design to prevent the cutting and lengthening of your oxygen sensor wires. They are a must with full-length headers and other specific applications.
Not Yet Reviewed
$50.35
ACDelco offers oil pressure safety switches for thousands of vehicles spanning more than half a century. These OE-style replacements are available in a variety of styles and materials, all manufactured to factory specifications for precise fit and performance. Order the model recommended for your application.
Not Yet Reviewed
$30.99
ACDelco GM Genuine Parts camshaft position sensors are a GM recommended replacement ideal for many vehicles on the road today. They monitor the rotational position of the camshaft(s). These sensors provide a signal to the engine control module, which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. GM Genuine Parts camshaft position sensors have been manufactured to provide you with the performance, durability, and service life you expect from General Motors.
( 11 )
$29.99
—
$35.99
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$28.99
Delphi vehicle speed sensors offer an accurate, clean signal input to your vehicle's ECM. Their designed digital output gives the maximum signal to noise ratio and they will maintain optimal performance during drastic temperature changes for robust, long-lasting sensor protection due to their single-element design. Delphi vehicle speed sensors provide quality materials, extended life, improved reliability, and superior drivability.
Not Yet Reviewed
$27.99
—
$55.99
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in a vehicle's electronic control system (ECU). The MAP sensors provide instantaneous manifold pressure information to the engine's computer (ECU). The data is used to calculate air density and determine the engine's air mass flow rate, which determines the required fuel metering for optimum combustion and influences the advance or retard of the ignition timing. A faulty Map sensor can cause a vehicle to run rich or lean, which will affect the vehicle's ignition timing and cause the engine not to run smoothly. Holstein Parts uses only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. Holstein Parts MAP sensors offer superior coverage for domestic and import applications.
Not Yet Reviewed
$24.99
—
$40.79
ACDelco GM Genuine Parts fuel pressure sensors send readings to the powertrain control module, which uses the data to adjust fuel delivery parameters. These true GM OE sensors are factory-recommended replacements, manufactured to provide the performance, durability, and service life you expect from General Motors. Monitor your fuel system accurately with the model designed for your application.
( 3 )
$29.99
—
$37.99
Give your ride an attitude adjustment with ACDelco crankshaft position sensors. Your original sensor can become worn or burnt and sensitive to hot engine temperatures, leaving you sitting on the side of the road. ACDelco offers high-quality, direct-fit replacement crankshaft position sensors to respond to your car's needs. Dozens of models are available for fitment on thousands of vehicles from the 1980s and up. Enhance the efficiency and performance of your ride; order the crankshaft position sensor recommended for your application.
( 7 )
$24.99
ACDelco GM Genuine Parts engine coolant sensors are a GM recommended replacement component for many vehicles on the road today. These original equipment engine coolant sensors are manufactured to fit your GM vehicle, providing you the same performance, durability, and service life you expect from General Motors.
( 69 )
$20.99
Delphi oxygen sensors will help you get your car up and running in no time. The engineers at Delphi designed these oxygen sensors to use OEM connectors and threads for easy installation in your car. Their unique sensor coating resists contamination to create oxygen sensors that are long-lasting and reliable. Whether you are replacing your exhaust and just want a new sensor or are replacing a worn-out unit, these Delphi oxygen sensors are for you.
( 44 )
$40.99
—
$58.99
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. These Dorman camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Dorman camshaft position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Dorman.
( 16 )
$22.99
—
$47.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
