Availability
Showing In Stock Items. Show All 97 Items.
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 80 )
$49.99
Banks Power PedalMonster is the first OBD-II connected throttle sensitivity controller for gas and diesel vehicles. Controlled via Banks iDash or mobile app, PedalMonster is the only module of its kind to offer safety features like ActiveSafety, Reverse Safety, and Adjustable Low-Speed Trim. Select the model that best suits your application. Product features: * City, Sport, and Track modes, each with 10 sensitivity levels * OBD-II connected * ActiveSafety failsafe circuitry with Health Monitoring * Reverse safety returns pedal to stock in reverse gear * Adjustable Low-Speed Trim controls how fast sensitivity is added at slow speeds * Powered by +12 V via OBD, not low-overhead pedal circuit * Controlled by iDash DataMonster, iDash SuperGauge and mobile app * View PedalMonster's activity in real-time via iDash and mobile app * Simple plug-and-play installation * Warranty friendly. Does not leave footprint after removal
( 38 )
$319.00
Summit Bucks
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$39.99
—
$44.99
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$64.99
Mopar Replacement oxygen sensors offer high-quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, or Jeep rolling down any road you choose to travel. When you need to replace and you want the proper fit, correct calibration, and reliable operation choose genuine Mopar Replacement oxygen sensors. Order the model designed for your specific vehicle application.
( 1 )
$151.99
Mopar Replacement air temperature sensors are genuine OE replacements designed to monitor the temperature of the air entering the engine—so that the proper air/fuel mixture can be maintained. These sensors are engineered from high-quality materials to provide you with reliable, long service with the right fit, function for your vehicle application to repair and/or restore performance and safety, just as it should be. For genuine OE replacement parts for your Mopar, choose Mopar Replacement.
( 5 )
$33.99
—
$85.99
JMS Chip PedalMAX drive-by-wire boosters install in just minutes and will help erase pedal turbo-lag, as well as increase throttle reaction and improve acceleration. These throttle response enhancers change the way your gas and diesel vehicles respond--with improved low- and mid-range horsepower, torque, and shift feel of your automatic; they also eliminate stalling on manual vehicles when accelerating. These drive-by-wire boosters have a rugged, waterproof design and offer a simple plug-and-play installation. If you hit the pedal for "take-off" but are unhappy with the delay in your stock throttle, these JMS Chip PedalMAX throttle response parts are the solution. Order the booster recommended for your vehicle.
( 55 )
$289.75
Crown Automotive oxygen sensors make modern electronic fuel injection and emission control possible. They help determine—in real time—if the air/fuel ratio of a combustion engine is rich or lean. If your sensor functions fail and testing confirms that your unit is faulty, simply order the Crown replacement compatible with your Jeep, Chrysler, Plymouth, or Dodge vehicle. These components are assembled from the finest grade materials and are always field-tested to ensure quality performance.
( 4 )
$41.99
—
$58.99
Keeping your engine cool is a big deal. Standard coolant temperature sensors offer fit and function to meet or exceed OE specifications for the peak operating performance of your vehicle's engine. Many functions of your vehicle depend on its coolant temperature sensor, so Standard sensors are 100 percent factory-tested to ensure trouble-free performance and extended service life. Do you have a check engine light? Replace corroded coolant temperature sensors with new ones from Standard Motor Products.
( 9 )
$11.99
—
$194.99
Delphi ignition knock sensors maximize your engine's performance--regardless of fuel quality! Their knock sensors hear various knock frequencies under many operating conditions to detect shifts and provide an accurate signal to your engine control module. The sensors meet or exceed OE requirements and reduce potential damage to your internal engine components. Knock, knock-- who's there? Engine. Engine who? Engine gonna buy me a Delphi ignition knock sensor? Listen to your engine--choose Delphi.
( 29 )
$17.99
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$20.99
—
$244.99
Dorman HVAC humidity sensors are direct replacements featuring durable construction that will restore functionality. Dorman HVAC humidity sensors are designed to match the fit and performance of the original sensor, properly detecting humidity, and helping to restore the climate control cabin air recirculation mode when the factory interior humidity sensor has failed from electrical malfunction or impact. They are made from quality materials for reliable service. Select the one designed for your vehicle.
Not Yet Reviewed
$57.99
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$33.99
—
$39.99
MAP (Manifold Absolute Pressure) sensors which fail may cause the engine to have a too rich or lean fuel mixture condition. Crown Automotive MAP sensors restore data transmission to regulate timing control and fuel delivery. They convert engine vacuum/manifold pressure to an electrical signal so that the computer knows how much load the engine is under. This data is the basis for calculating values which keep your vehicle in top running order.
( 3 )
$17.99
—
$46.99
Are you having problems with your electronic throttle? If so, then pick up one of these Dorman accelerator pedal position sensors. They are designed to indicate the position of the accelerator pedal by converting the accelerator pedal movement into two electrical signals so that the computer can provide the proper change in throttle position. Available for a variety of vehicles, the Dorman accelerator pedal position sensors are sure to solve any of your electronic throttle issues.
( 16 )
$75.99
Standard Motor battery current and voltage sensors measure the temperature of the battery, regulating voltage to the vehicle charging system to function properly at all times. Standard Motor ensures these sensors are direct-fit, by testing every unit before it is packaged. These sensors are unrivalled for fit, form, function, and quality. Replace your worn or faulty battery current and voltage sensor with one from Standard Motor.
Not Yet Reviewed
$35.99
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$11.99
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 17 )
$9.99
—
$25.99
Summit Bucks
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 21 )
$99.99
That glowing light on the dash that says "ABS" isn't a reminder that your vehicle has this safety feature--it's a reminder that it isn't functioning properly. Crown Automotive ABS speed sensors are designed to the same specifications as the OE units for easy fitment and reliability. Each wheel has at least one sensor that monitors speed and sends that information to the control module, where the correct pressure is sent to ensure quick stopping without skidding. The dash light comes on to inform you that at least one sensor isn't working, and the ABS is turned off. Get the correct parts for the right locations with Crown ABS speed sensors.
( 2 )
$16.99
—
$31.99
Crown Automotive knock sensors are designed to detect harmful engine vibrations. The signal from these devices is sent to the PCM/ECM, and that is used to control the engine's timing. The symptoms of a bad sensor usually show up at highway speeds or under a load. Your vehicle will have a loss in fuel mileage and acceleration, especially at highway speeds--performance decreases and there is a risk of serious engine damage. If your knock sensors have failed or broken, check out Crown for quality replacement parts.
Not Yet Reviewed
$32.99
Mopar Replacement coolant temperature sensors are genuine OE replacements. That means your Chrysler, Dodge, Plymouth, Ram, or Jeep will receive the perfect part to repair and/or restore performance and safety, just as it should be. The sensors are made from high-quality materials to provide reliable, long service with the right fit, function, and value. Engine temperature is vital for optimum performance—and proper functioning Mopar coolant temperature sensors are essential to maintain efficiency. Order the model designed for your vehicle application.
( 1 )
$32.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 19 )
$20.99
—
$26.99
Crown Automotive air temperature sensors are replacement parts which gauge the temperature of the incoming air to the engine. This information is provided to calculate the correct amount of fuel needed for proper economy and performance. When your sensors become damaged or less effective, even those of you not mechanically inclined will find that you can install these sensors easily. Crown makes them to OE specifications for fit, function, and form.
( 2 )
$15.99
—
$21.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
