Availability
Banks Power PedalMonster is the first OBD-II connected throttle sensitivity controller for gas and diesel vehicles. Controlled via Banks iDash or mobile app, PedalMonster is the only module of its kind to offer safety features like ActiveSafety, Reverse Safety, and Adjustable Low-Speed Trim. Select the model that best suits your application. Product features: * City, Sport, and Track modes, each with 10 sensitivity levels * OBD-II connected * ActiveSafety failsafe circuitry with Health Monitoring * Reverse safety returns pedal to stock in reverse gear * Adjustable Low-Speed Trim controls how fast sensitivity is added at slow speeds * Powered by +12 V via OBD, not low-overhead pedal circuit * Controlled by iDash DataMonster, iDash SuperGauge and mobile app * View PedalMonster's activity in real-time via iDash and mobile app * Simple plug-and-play installation * Warranty friendly. Does not leave footprint after removal
( 37 )
$319.00
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 80 )
$43.99
—
$114.99
Summit Bucks
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 101 )
$52.99
—
$59.99
OER coolant temperature sending units are direct replacements that will restore reliable readings. Offering a proper fit for a hassle-free install, these sensors will efficiently relay electrical signals to your gauges to display accurate engine coolant temperature. OER coolant temperature sending units will ensure your gauge functions properly.
( 5 )
$10.99
Mopar Replacement coolant temperature sensors are genuine OE replacements. That means your Chrysler, Dodge, Plymouth, Ram, or Jeep will receive the perfect part to repair and/or restore performance and safety, just as it should be. The sensors are made from high-quality materials to provide reliable, long service with the right fit, function, and value. Engine temperature is vital for optimum performance—and proper functioning Mopar coolant temperature sensors are essential to maintain efficiency. Order the model designed for your vehicle application.
( 1 )
$49.99
Mopar Replacement air temperature sensors are genuine OE replacements designed to monitor the temperature of the air entering the engine—so that the proper air/fuel mixture can be maintained. These sensors are engineered from high-quality materials to provide you with reliable, long service with the right fit, function for your vehicle application to repair and/or restore performance and safety, just as it should be. For genuine OE replacement parts for your Mopar, choose Mopar Replacement.
( 5 )
$17.99
—
$33.99
Hypertech REACT Performance throttle enhancers put complete throttle response control at your fingertips. With throttle curves designed to provide a more exciting ride, these innovative optimizers deliver fully customizable power with a simple knob that lets you switch between multiple modes and throttle intensity on-the-fly. Installation is easy—completely plug-and-play with automatic setup sequence, and a magnetic A/C vent mount. Also, Hypertech REACT throttle enhancers will not void your factory warranty. Order the model recommended for your specific vehicle. Features of Performance throttle enhancers: * Modes: Track, Sport, Street, Economy, Stock * Pressing the knob clicks between each drive mode curve * Rotating the knob up increases throttle intensity, rotating down decreases throttle intensity * On-the-fly adjustments * LED setting indicators * Multi-level safety protection—incorporates multiple checks of the accelerator pedal signals coming and going from the microprocessor inside * Custom tuning software * Internet updateable
( 2 )
$299.95
Spicer Drivetrain ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of your ABS system, and pulses at low-speed can be frustrating and dangerous. Spicer tone rings will maintain your vehicle's sensor readings and allow your ABS system to function at its peak.
( 1 )
$52.99
Keeping your engine cool is a big deal. Standard coolant temperature sensors offer fit and function to meet or exceed OE specifications for the peak operating performance of your vehicle's engine. Many functions of your vehicle depend on its coolant temperature sensor, so Standard sensors are 100 percent factory-tested to ensure trouble-free performance and extended service life. Do you have a check engine light? Replace corroded coolant temperature sensors with new ones from Standard Motor Products.
( 8 )
$11.99
—
$194.99
Delphi ignition knock sensors maximize your engine's performance--regardless of fuel quality! Their knock sensors hear various knock frequencies under many operating conditions to detect shifts and provide an accurate signal to your engine control module. The sensors meet or exceed OE requirements and reduce potential damage to your internal engine components. Knock, knock-- who's there? Engine. Engine who? Engine gonna buy me a Delphi ignition knock sensor? Listen to your engine--choose Delphi.
( 29 )
$17.99
Crown Automotive knock sensors are designed to detect harmful engine vibrations. The signal from these devices is sent to the PCM/ECM, and that is used to control the engine's timing. The symptoms of a bad sensor usually show up at highway speeds or under a load. Your vehicle will have a loss in fuel mileage and acceleration, especially at highway speeds--performance decreases and there is a risk of serious engine damage. If your knock sensors have failed or broken, check out Crown for quality replacement parts.
Not Yet Reviewed
$32.99
Crown Automotive oxygen sensors make modern electronic fuel injection and emission control possible. They help determine—in real time—if the air/fuel ratio of a combustion engine is rich or lean. If your sensor functions fail and testing confirms that your unit is faulty, simply order the Crown replacement compatible with your Jeep, Chrysler, Plymouth, or Dodge vehicle. These components are assembled from the finest grade materials and are always field-tested to ensure quality performance.
( 4 )
$45.99
—
$59.99
MotoRad coolant temperature sensors measure changes within the cooling system of a vehicle. This continuous measurement goes to the vehicle's powertrain control module (PCU) in order to help manage fuel injection, ignition timing, variable valve timing, and transmission shifting. MotoRad uses only the highest quality, OEM-approved premium materials and 100 percent factory resistance calibrated to ensure precision tolerances, resulting in highly accurate readings for optimal performance. A wide variety of MotoRad coolant temperature sensors ensure that most domestic and import applications are covered.
Not Yet Reviewed
$7.99
—
$124.99
Delphi engine coolant temperature sensors are top-quality, direct fit OE replacements, which are designed to eliminate connection and failure points. With a one-piece, lead-frame design from the sensing tip to the connector terminals, these units equip your vehicle with a proven design that's built to last. They put the engine under fuel control operation quicker and reduce harmful cold-start emissions by 40 to 50 percent. Delphi engine coolant temperature sensors are built to last, even under the toughest conditions, to endure the long haul. Improve reliability, durability and fuel economy with Delphi.
( 16 )
$33.99
Summit Bucks
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 21 )
$99.99
—
$139.99
NGK Spark Plugs offers NTK engine coolant temperature sensors for a variety of applications. They determine the exact temperature of the engine coolant by sending an analog signal to the ECM to ensure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. These brass sensors may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: Check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating. Additional notes: * The NTK Difference: Thread sealant/O-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease provides accurate temperature transfer to the thermistor. * Engine coolant temperature sensors measure the temperature of the coolant. The readings from the ECT sensor are sent back to the Engine Control Unit (ECU) to adjust the fuel injection and ignition timing. * Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature. * Faster response time: Thermal conductive grease inside brass housing increases sensor response time * OE matched: Wires and probe length match original equipment. Mounting clip(s) included where applicable
Not Yet Reviewed
$11.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 19 )
$31.99
Mopar Replacement park assist sensor components offer high-quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, Jeep, or Ram rolling down any road you choose to travel. When you need to replace, and you want the proper fit, correct calibration, and reliable operation, choose genuine Mopar Replacement parts.
Not Yet Reviewed
$19.99
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in a vehicle's electronic control system (ECU). The MAP sensors provide instantaneous manifold pressure information to the engine's computer (ECU). The data is used to calculate air density and determine the engine's air mass flow rate, which determines the required fuel metering for optimum combustion and influences the advance or retard of the ignition timing. A faulty Map sensor can cause a vehicle to run rich or lean, which will affect the vehicle's ignition timing and cause the engine not to run smoothly. Holstein Parts uses only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. Holstein Parts MAP sensors offer superior coverage for domestic and import applications.
Not Yet Reviewed
$16.99
Crown Automotive air temperature sensors are replacement parts which gauge the temperature of the incoming air to the engine. This information is provided to calculate the correct amount of fuel needed for proper economy and performance. When your sensors become damaged or less effective, even those of you not mechanically inclined will find that you can install these sensors easily. Crown makes them to OE specifications for fit, function, and form.
( 2 )
$14.99
The knock sensor is able to detect mechanical stress and produces a voltage when the car knocks or pings. Under heavy acceleration, it sends signals to the ECU and the ECU retards the ignition timing to compensate for the knocking, which in effect protects the pistons and rings from damage. Knocking also occurs when using low-grade fuel and having the knock sensor allows you to use different grade fuels without causing engine damage. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts knock sensors line has superior coverage for domestic and import applications.
( 3 )
$10.99
Dorman HVAC humidity sensors are direct replacements featuring durable construction that will restore functionality. Dorman HVAC humidity sensors are designed to match the fit and performance of the original sensor, properly detecting humidity, and helping to restore the climate control cabin air recirculation mode when the factory interior humidity sensor has failed from electrical malfunction or impact. They are made from quality materials for reliable service. Select the one designed for your vehicle.
Not Yet Reviewed
$45.99
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 174 )
$40.99
—
$187.99
Mopar Replacement oxygen sensors offer high-quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, or Jeep rolling down any road you choose to travel. When you need to replace and you want the proper fit, correct calibration, and reliable operation choose genuine Mopar Replacement oxygen sensors. Order the model designed for your specific vehicle application.
( 1 )
$68.99
—
$244.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
