Availability
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
Crown Automotive coolant temperature sensors are a top-priority replacement for any vehicle. They're constructed out of high-quality materials and provide you with accurate coolant temperature data to the engine management system. When your vehicle's sensor is malfunctioning, you may experience inaccurate gauge functions, an overheating engine, internal engine damage, or excessive fuel consumption. All of these major issues can be solved with one simple little coolant temperature sensor from Crown Automotive.
( 10 )
$8.99
—
$28.99
Crown Automotive crankshaft position sensors are used to control ignition timing and the fuel injector. They're crafted to compile information about the working condition and speed of the crankshaft, ensuring your engine cylinders are always performing as needed. This enables you to set ignition timing precisely to improve the performance of the engine cylinders. Crown crankshaft position sensors are available for fitment on a wide range of vehicles.
( 7 )
$15.99
—
$71.99
MAP (Manifold Absolute Pressure) sensors which fail may cause the engine to have a too rich or lean fuel mixture condition. Crown Automotive MAP sensors restore data transmission to regulate timing control and fuel delivery. They convert engine vacuum/manifold pressure to an electrical signal so that the computer knows how much load the engine is under. This data is the basis for calculating values which keep your vehicle in top running order.
( 4 )
$17.99
—
$46.99
That glowing light on the dash that says "ABS" isn't a reminder that your vehicle has this safety feature--it's a reminder that it isn't functioning properly. Crown Automotive ABS speed sensors are designed to the same specifications as the OE units for easy fitment and reliability. Each wheel has at least one sensor that monitors speed and sends that information to the control module, where the correct pressure is sent to ensure quick stopping without skidding. The dash light comes on to inform you that at least one sensor isn't working, and the ABS is turned off. Get the correct parts for the right locations with Crown ABS speed sensors.
( 2 )
$14.99
—
$74.99
Crown Automotive vehicle speed sensors are used by many electronic and transmission systems to ensure correct vehicle operation. The small units convey information to your on-board computer about how fast the engine is spinning at any particular moment—which could affect the performance of the transmission, speedometer, ABS, power steering, or cruise control. Like many engine components, speed sensors can eventually malfunction through years of use. If your car, truck, or van develops a faulty sensor, Crown stocks a variety of replacements for countless makes and models.
( 1 )
$16.99
—
$293.99
Crown Automotive camshaft position sensors provide information vital to your engine's function. They offer a selection of reliable sensors to send off accurate data to your vehicle's ECM, for proper ignition timing and a smoother-running engine. Timing is important for efficient performance. Replace bad sensors with Crown camshaft position sensors.
( 2 )
$8.99
—
$57.99
Crown Automotive throttle position sensors restore proper idle, rpm, and fuel efficiency. Choose between a variety of TPS styles and fitments to ensure your vehicle's top performance. These economical units are available for numerous models. For quality, efficiency, and a perfect fit, order your replacement throttle position sensors from Crown.
( 3 )
$19.99
—
$76.99
Crown Automotive park assist sensors detect obstacles around your vehicle, enabling you to park without incident. They provide OE quality, fit, and performance, and are available in several versions covering Chrysler, Dodge, Fiat, Jeep, and Ram vehicles. To restore optimal operation on your vehicle, choose sensors from Crown.
Not Yet Reviewed
$27.99
Crown Automotive oxygen sensors make modern electronic fuel injection and emission control possible. They help determine—in real time—if the air/fuel ratio of a combustion engine is rich or lean. If your sensor functions fail and testing confirms that your unit is faulty, simply order the Crown replacement compatible with your Jeep, Chrysler, Plymouth, or Dodge vehicle. These components are assembled from the finest grade materials and are always field-tested to ensure quality performance.
( 4 )
$39.99
—
$132.99
Getting accurate readings of your Jeep's oil level is important to keep your engine running smoothly. Crown Automotive oil level sensors are direct replacements for faulty units. If you are being alerted to a low engine oil level but a check of the dipstick tells you otherwise, the sensor may need replaced. Do the job with quality sensors from Crown.
Not Yet Reviewed
$35.99
An unresponsive accelerator pedal along with a check engine light is bad news and leaves your Jeep undrivable. Crown Automotive accelerator pedal assemblies include the pedal position sensor, so you can get back on the road safely. They are direct replacements offering the proper fit and performance, matching that of the originals. Hit the gas with Crown accelerator pedal assemblies.
Not Yet Reviewed
$123.99
Crown Automotive air temperature sensors are replacement parts which gauge the temperature of the incoming air to the engine. This information is provided to calculate the correct amount of fuel needed for proper economy and performance. When your sensors become damaged or less effective, even those of you not mechanically inclined will find that you can install these sensors easily. Crown makes them to OE specifications for fit, function, and form.
( 2 )
$10.99
—
$38.99
Crown Automotive crankshaft position sensor grommets are quality rubber replacement parts that go between your bellhousing and sensor. If your CPS grommets (a.k.a. clutch timing probe grommets) need replaced, these direct-fit parts are the perfect replacements for your Dodge or Jeep vehicle.
( 4 )
$1.99
Crown Automotive knock sensors are designed to detect harmful engine vibrations. The signal from these devices is sent to the PCM/ECM, and that is used to control the engine's timing. The symptoms of a bad sensor usually show up at highway speeds or under a load. Your vehicle will have a loss in fuel mileage and acceleration, especially at highway speeds--performance decreases and there is a risk of serious engine damage. If your knock sensors have failed or broken, check out Crown for quality replacement parts.
Not Yet Reviewed
$30.99
—
$73.99
Don't get heated up over inaccurate readings. When your sensors go bad and give you false readings of low coolant warnings, get Crown coolant level sensors. These replacements are available for the vehicles noted. These OE-style components from Crown monitor the internal temperature of the engine accurately.
Not Yet Reviewed
$22.99
—
$27.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
