Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
14 Results Found For "weld"
Showing In Stock Items. Show All 17 Items.
Computech Weld-In Temperature Sensors
Computech weld-in temperature sensors are designed for use with Computech's EGT Plus Series, as well as DataMaxx data logger systems. The probe is a 3/16 in. diameter and utilizes an 1/8 in. pipe thread weld-in bung. The probe is centered in the tube using a compression fitting screwed into the weld-in bung, both of which are included. The probe lead has a male K-type connector on the end and can easily be shortened to your installation. The Computech weld-in temperature sensors are designed to be used with regular octane gasoline, high-octane racing gas, ethanol, methanol, and nitro mixtures. They cannot be used with diesel, as a specific diesel exhaust gas sensor is required.
Not Yet Reviewed
$109.95
Racepak Weld-In Bungs
Racepak weld-in bungs offer quality made from steel and stainless steel. For EGT and air/fuel sensors, these weldments will create a place for your sensors and probes.
Not Yet Reviewed
$12.24
Lowdoller Motorsports Shock Travel Sensor Mounts
Lowdoller Motorsports shock travel sensor mounts are designed to secure sensors to a vehicle's suspension, enabling the measurement of shock travel and suspension movement during operation. This data helps racers and tuners to analyze the vehicle's suspension performance, optimize shock tuning, improve tire performance, and identify suspension-related issues like wheel spin or car twist, leading to better vehicle setup and performance. The mounts are designed to facilitate the use of shock travel sensors on various vehicle and suspension types, from stock setups to highly modified ones.
Not Yet Reviewed
$12.99
On Sale
Holley EFI 8-Channel CAN EGT Kits
Introducing the Holley EFI 8-Channel CANBus EGT kits, for Holley EFI! Exhaus/Gas/Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to as identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The EGT probes come in different lengths ensuring a clean looking installation. The included stainless steel bungs feature a built-in step, making installation as easy as possible! Kit features: * Compatible with HP or Dominator EFI, and Terminator X EFI * Plug-and-Play 8-Channel CAN EGT module, for quick and easy installation * High-quality 1/4 in. stepped stainless steel EGT weld bungs * Robust 1/4 in. EGT probes, designed to withstand the extreme cylinder pressures * 4 ft. CAN extension harness * Analog output wires, to be used with non-Holley EFI installations * Requires V5 build 100 or newer software/firmware
( 1 )
$1,749.95
$1,573.95
Lowdoller Motorsports Shock Travel Sensor Mounting Hardware
Lowdoller Motorsports shock travel sensor mounting hardware is designed to secure shock travel sensors to a vehicle's control arms and chassis without requiring welding, providing a way to collect real-time data on suspension movement for performance tuning. The collected data helps users understand how the suspension is reacting, allowing them to identify and correct issues, leading to improved performance, better handling, and increased tire performance. This shock travel sensor mounting hardware is available for compatibility for various suspension setups, from stock to advanced drag racing applications. Shock travel sensors sold separately.
Not Yet Reviewed
$40.00
Holley EFI Single-Channel EGT Kits
Introducing the Holley EFI Single-Channel EGT kits! They keep you in-the-know about what's going on with your engine. Exhaust gas temperature data is critical information when your engine tune-up seems to be on the ragged edge. Knowing the exhaust temp can help you identify potential horsepower left on the table, or pinpoint any weak links in your max effort race engine. Holley offers these EFI Single-Channel EGT kits for non-Holley applications, as well as compatibility with HP Tuners, Dominator EFI, and Terminator X. Order the Holley EFI Single-Channel EGT kit to meet your application needs. Kit features, specs, and parts may include: * Single-Channel CANbus EGT controller module for quick and easy installation with Holley EFI—or Single-Channel Analog EGT controller with unterminated output wires for universal installations (please specify when placing order) * High-quality 1/4 in. stainless steel EGT weld bung * Robust 1/4 in. probe designed to withstand extreme cylinder pressures * Sensor (included) is designed to work with any engine combination, with an open reinforced tip for the fastest response rate and improved shielding
Not Yet Reviewed
$319.95
Computech EGT Plus Monitor Kits
Have you ever had a tune-up on your engine that was just perfect? Or, did you spend the time and money to dyno your engine? Wouldn't it be nice to go to the track and get back to that same tune-up every single time? With the Computech EGT Plus (exhaust gas temperature) monitor kits you can make sure that your vehicle is tuned correctly, week in and week out. Choose the EGT Plus monitor kit that suits your needs and get ready to tune your fuel system with confidence to maintain the performance edge and consistency you need to be a winner! Additional features of the EGT Plus monitor kits include: * Available with single or dual probes * Available in weld-in or clamp-on styles * Unit monitors dual temperature channels * Power source through 9 V battery or 12 V vehicle supply * Continuous mode--simple maximums * Record switch mode -- Choose when to record -- Maximum temperature and rpm * Trans-brake mode -- Launch temperature and rpm -- Finish line temperature and rpm -- Maximum temperature and rpm -- Time maximums occurred -- Notable time, temperature, and rpm
( 2 )
$629.95
FuelTech Exposed Tip Thermocouples
FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners
Not Yet Reviewed
$99.00
On Sale
AEM Electronics Exhaust Backpressure Install Kits
AEM exhaust backpressure install kits are specifically designed to give accurate backpressure readings, without sacrificing sensor longevity due to extreme operating conditions. Designed for use with their 4-channel wideband UEGO controller, you get precision readings for ultimate performance using AEM exhaust backpressure install kits. Kits include: * Stainless steel 100 psig pressure sensor * Stainless steel standoff tube with fittings * Stainless steel braided hose * Weld-on/threaded bung.
( 1 )
$377.95
$340.15
Manufacturer Rebate
Innovate EGT Probes
Innovate's TC-4 Plus is ideal for applications such as dynamometers, data acquisition systems, or standalone ECUs. They offer crucial benefits for engine tuning and protection by providing high-quality, precise, and fast temperature readings. For turbocharged engines, race cars, and high-performance builds, EGT monitoring is an essential diagnostic tool that goes beyond what a standard air-fuel ratio (AFR) gauge can provide. Additional product details: * The probes are built with durable materials to withstand the extreme temperatures and vibrations found in performance and racing applications * Available individually for replacement or as an added accessory, the probes include a weld-in stainless steel fitting and bung with 6 ft. wire * Innovate's K-type thermocouples are compatible with their range of tuning devices and data loggers, including the TC-4 Plus, LMA-3, and DL-32
Not Yet Reviewed
$117.99
Manufacturer Rebate
Innovate LM-2 Dual Digital Air/Fuel Ratio Meter Basic Kits
Innovate LM-2 dual digital air/fuel ratio meter basic kits feature the LM-2 that combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Innovate basic kits include the accessories to display your air/fuel ratio, either on the meter and/or on your PC. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * Dual Channel A/F version * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC Innovate dual basic kits include: * LM-2 meter * Bosch wide-band oxygen sensors * 8 ft. sensor cables * Cigarette lighter power adapter * USB cable for PC connection * Weld-in bung and plug kits * Manual
( 1 )
$658.99
Computech Custom 8-Cylinder Thermocouple Kits
Computech custom 8-cylinder thermocouple kits come with your choice of either weld-in or clamp-on EGT probes. The EGT probes are 3/16 in. and can stand up to the most extreme temperatures. Your custom 8-cylinder thermocouple kits are available in either the Chevy (1, 3, 5, 7) and (2, 4, 6, 8) configuration or Ford (1, 2, 3, 4) and (5, 6, 7, 8) configuration. Each EGT probe has a custom-length lead, allowing the probes to plug in cleanly to the EGT modules. These Computech custom 8-cylinder thermocouple kits allow for the removal of the headers without having to take out the thermocouple sensors or un-wire.
Not Yet Reviewed
$1,599.95
Computech Liquid Temperature Monitor Kits
Computech liquid temperature monitor kits are designed to get you the readings you need. The probe is centered in the tube using a compression fitting screwed into the weld-in bung, both of which are included in the kits.
Not Yet Reviewed
$129.95
—
$159.95
Manufacturer Rebate
Innovate DB Digital Wideband Air/Fuel Ratio Gauge with LC-2 Kits
Do you ever wonder what your exact air/fuel ratio is? Well, now you can know with Innovate DB digital air/fuel ratio gauge with LC-2 kits. They feature a new, sleek design to match today's modern styles. These kits have a black face, black bezel, and are available with either blue or red LED numbers to fit your needs. Use the included LC-2 wideband controller and Bosch 5-wire oxygen sensor to complete your installation. Also included with the Innovate DB digital air/fuel ratio gauge with LC-2 kits is an oxygen sensor bung and plug, gauge mounting hardware, a CD, and a quick-start information guide.
( 37 )
$229.99
