Availability
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$368.95
$168.95
—
$368.95
Lowdoller Motorsports universal pressure senders provide a cost-effective alternative to higher-end sensors, making them an accessible option for adding data logging to your racing setup without significant expense. Built for demanding environments, these pressure sensors offer a broad range of versatility to monitor various fluid or gas pressures (like fuel, oil, or coolant) in vehicles and other systems. They serve as essential components for data logging to provide real-time information to an engine management system (ECU) or data logger. Select the model designed for your application needs.
Not Yet Reviewed
$41.00
—
$72.00
Gather precise rotational speeds with rpm sensors from Racepak. They have a variety of sensors for engine, driveshaft, wheel, clutch, and ring gear to compile data, and the sensors are commonly used in conjunction with Racepak data logger units.
( 5 )
$13.12
—
$239.95
Haltech offers a wide range of data acquisition components, including this GPS Speed Input Module for applications that require a digital speed signal. It also includes a GPS antenna matching male DTM-3 connector and pins. * Notes: Calibration: 5000ppk (5000 pulses per km), Use with SPI or DPI ECU inputs, GPS update rate 10Hz, high accuracy 0.3 percent deviation, pulse compensation in tunnel, anti-GPS drift technology.
( 1 )
$130.00
If you've changed anything to higher pressure output then you'll want one of these Racepak powered pressure transducer sensors. They are available in different psi ratings, so you can choose what range best suits your application.
( 2 )
$249.95
Shock travel sensors are linear potentiometers that record the slightest amount of suspension movement. Monitoring the extension and compression of the shock absorbers aids greatly in understanding what the chassis is doing. It is a principal means of evaluating suspension movement and chassis setup. Regardless of your type of racing, Racepak shock travel sensors provide information that is frequently crucial to separating winners from the also-rans. They are usually connected through an analog port of a data recorder (sold separately) and monitored at high sample rates. An analog channel is required for each sensor; a separate sensor is required for each wheel monitored.
Not Yet Reviewed
$479.95
—
$519.95
On Sale
If you're unable to use a thermocouple-style assembly due to limited space availability, Racepak liquid temperature sensors are a great alternate choice. These replacement sensors are for use with V-net modules and require the adapter harness.
( 2 )
$38.52
$21.19
—
$89.95
On Sale
Racepak flow meters provide accurate flow readings for both fuel and hydraulic clutch systems. These general purpose turbine-type flow meters, when used along with DataLink's math channel capabilities, allow you to monitor the health of your fuel pump, as well as confirm the function of your fuel system timers and system lean-outs. Also offered in low-flow versions, those designated as low-flow are recommended for carbureted applications and are calibrated in lbs./hr. unless otherwise noted. Racepak flow meters are available constructed from aluminum for gasoline and nitromethane, and in stainless steel for methanol fuel.
Not Yet Reviewed
$1,399.95
$909.95
—
$1,449.95
Lowdoller Motorsports shock travel sensors offer specific features that make them especially effective for performance applications, providing racers with precise data to optimize suspension tuning, diagnose chassis issues, and improve car performance on the track. The sensors are known for their compact size and compatibility with all major data loggers, making them easy to integrate into a performance vehicle's existing electronics. Select the Lowdoller shock travel sensors designed for your vehicle's suspension setup.
Not Yet Reviewed
$68.00
—
$165.00
AiM Sports pressure sensors are small, lightweight, but well-engineered pressure transducers—and are some of the best in the marketplace today. AiM sensors are IP67 rated, weigh only 34g, are made from stainless steel, and operate between -20 and +135 degrees C. They're designed for the detection of fluid and air pressures in demanding motorsport and automotive applications—and are ideal for high-precision data acquisition or control systems. These transducers can be installed directly onto vehicles or as part of a test stand or dyno. They offer a high level of reliability and endurance, and are protected against the high vibration, shock, and extreme temperatures found in motorsport. Their modular construction and programmable amplifier provide a fast delivery time for standard and custom configurations. Industry standard 3-wire electrical connections allow configuration with most common ECUs and data-logging systems. Aim Sports pressure sensors are race-proven around the world and offer a reliable and cost-effective solution for data acquisition. They're available in different styles and options. Order the model best suited for your application.
( 1 )
$165.00
Lowdoller Motorsports fluid temperature sensors serve the purpose of real-time monitoring and control of critical fluid temperatures in a motorsports vehicle's engine, transmission, oil, or coolant systems. By providing precise accurate data to the driver or an ECU, these sensors enable performance optimization, prevent overheating and potential damage, and contribute to overall vehicle consistency during racing events or performance driving.
Not Yet Reviewed
$55.00
Ideal for racers and most commonly used as shock travel sensors, Haltech linear position sensors can also be used to measure gearbox shaft position, differential angle, or in any application that requires linear position data. In short, these simple sensors can make your ride not just faster but also more predictable. Used as shock travel sensors, these data acquisition components can measure and log the speed and distance of your shock's compression, extension, rebound, etc. to give you an accurate picture of how the vehicle reacts to the track surface and changes. They remove the guesswork from chassis tuning. Armed with this information, you can significantly cut down on testing and adjusting, saving not just time but wear and tear on your vehicle. Linear position sensors are available in 1/2 in. and 1 in. models for 100mm through 250mm applications.
Not Yet Reviewed
$115.00
—
$199.00
On Sale
Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Select the probe needed. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses
Not Yet Reviewed
$125.95
$113.35
—
$125.95
Racepak GPS V-Net modules allow you to add a GPS sensor to any non-GPS equipped V-Net data recorder. They utilize a standard V-Net tee connector and install into the Datalink II software, providing a speed channel for analytical, display, and odometer information.
Not Yet Reviewed
$429.95
FuelTech Travel sensors are designed to accurately measure suspension or body movement of your vehicle up to eight inches. They feature 5mm Heim joints for mounting, and are compatible with most ECUs, including FuelTech's Engine Control Units (sold separately). Order the FuelTech Travel sensor model in the application you need for your specific setup. Connector Pinout: --Pin 1 - Ground (Brown) --Pin 2 - Signal (Yellow) --Pin 3 - 5 V (Blue) Note: Requires a FuelTech Travel sensor connector kit (sold separately).
Not Yet Reviewed
$349.00
Knowledge is power and AiM Sports vehicle sensors will provide plenty of knowledge. Each sensor is designed to monitor a critical area of your race car, helping you tune your ride for better performance and greater consistency. Each sensor talks to an AiM sports data logger and display, allowing you to see the information in real time or download it later to analyze it for the next heat.
( 2 )
$82.99
—
$155.00
FAST XFI driveshaft speed sensor kits measure driveshaft rpm to provide more accurate data for the traction control unit. Two magnets are fitted to the collar around the pinion yoke, which attaches to the driveshaft. When one of the magnets passes the pickup, it sends a signal to the XFI unit. They then use that signal to calculate both driveshaft rpm and driveshaft acceleration. As a result, these speed sensor kits provide much more precise readings, as opposed to determining driveshaft speed solely through variable engine rpm. The data they provide is perfect for drag race applications. FAST XFI driveshaft speed sensor kits are particularly beneficial for drag racers who need precise data to tune their vehicles for optimal speed and control, and to analyze performance during a run.
( 2 )
$238.95
—
$260.95
FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners
Not Yet Reviewed
$89.00
Infrared sensors are used to monitor the distance to an object, relative to the sensor, when contact cannot be made with the object. Racepak ride height sensors are ideal for use in setting up your vehicle suspension by monitoring the chassis height in relation to the moving ground plane (race track). These sensors with Molex connectors attach to the V-Net cable of any V-Series recorder, or 0-5 V module on a Pro-Series unit (sold separately). They can also be attached to the analog port by using an interface module, rather than the V-Net module. Whichever attachment option is chosen, these ride height sensors will be put into motion—measuring distances!
Not Yet Reviewed
$929.95
Computech weld-in temperature sensors are designed for use with Computech's EGT Plus Series, as well as DataMaxx data logger systems. The probe is a 3/16 in. diameter and utilizes an 1/8 in. pipe thread weld-in bung. The probe is centered in the tube using a compression fitting screwed into the weld-in bung, both of which are included. The probe lead has a male K-type connector on the end and can easily be shortened to your installation. The Computech weld-in temperature sensors are designed to be used with regular octane gasoline, high-octane racing gas, ethanol, methanol, and nitro mixtures. They cannot be used with diesel, as a specific diesel exhaust gas sensor is required.
Not Yet Reviewed
$109.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.
Not Yet Reviewed
$349.95
$192.95
—
$399.95
If you're looking for an affordable replacement driveshaft speed sensor, check out Lowdoller Motorsports' offering. These driveshaft speed sensors provide high-resolution data logging of driveshaft RPM, allowing for tuning and data analysis in drag racing to identify tire slip, improve traction control, and achieve competitive, repeatable performance by providing direct information about the drivetrain's output. These sensors use ferrous triggers or magnets to generate a signal that is sent to a data acquisition system or ECU, enabling precise control and tuning for better hooking and faster runs.
Not Yet Reviewed
$81.50
—
$91.50
Racepak un-programmed V-Net modules with sensors are customizable for a variety of applications. This makes them ideal whether replacing worn-out/damaged modules, or simply if you prefer your own programming for the V-Net system. The V-Net ID and sensor type parameters will not be pre-programmed on these modules. As with all V-Net modules connecting to the V-Net cable, they feature plug-and-play installation, and can be linked in any sequence. Repair or further customize your setup with Racepak un-programmed V-Net modules. Order the proper base pressure setting for your application.
Not Yet Reviewed
$329.95
Racepak V-Net modules work with the V-Net "smart data" transfer network to help you monitor a variety of functions and components on your vehicle. They feature plug-and-play installation on the V-Net cable for collecting the specific data you require. All connected modules are in series, so they can be installed and/or replaced in any sequence. Go ahead and build anything from a simple dash setup to a full-blown data acquisition system with Racepak V-Net modules. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 1 )
$329.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
