Race Electronics Ignitions & Electrical

HP Tuners CORE Transmission Control Harnesses

CORE ECU is HP Tuners debut standalone engine management solution, delivering superior control over your powerplant with many features that go beyond the constraints of factory ECUs. HP Tuners offers several wiring harness options to mate with their CORE ECU. Their CORE transmission control harnesses are 3 ft. in length and terminated with one or two connectors, along with labeled open leads. Choose the one needed for your build.

Not Yet Reviewed

$159.99

—

$259.99

On Sale

Racepak Analog Pre-Programmed V-Net Modules With Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.

4.5 out of 5 stars ( 14 )

$265.95

—

$368.95

Dakota Digital OBD-II/CAN Interfaces

Dakota Digital OBD-II/CAN interfaces are designed to plug directly into your engine's diagnostic port, extracting transmission data from the OBD-II computer. They can output speed, rpm, and engine temperature. The interfaces decode the information supplied from the ECM and supply this information to the VFD3 rev. G, VHX and HDX control box instruments. * Module for use with Dakota Digital RTX, HDX, VHX, and VFD3 systems with a black control module.

4.79 out of 5 stars ( 61 )

$133.00

Dakota Digital EFI Interface Modules

With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature

5.0 out of 5 stars ( 6 )

$109.25

—

$133.00

Haltech Multi-Function CAN Gauge

Haltech's new multi-function CAN gauge displays real-time data from your Haltech ECU. Easily customize your gaugeART CAN Gauge to display the data you want to see with the included gaugeART CAN Gauge App (requires Android 4.4 or later or Apple iOS 9.1 or later). The easy-to-use app on your smartphone or tablet uses a wireless connection to the gauge for easy setup and customization. * Set up via gauge-mounted buttons or a mobile app * High-contrast, dimmable OLED display * 1, 2, or 4 gauge layouts on up to 10 different pages * Custom warning points with special warning screens SUPPORTED PARAMETERS: Boost Pressure Air/Fuel Ratio Coolant Temperature Fuel Pressure Ethanol content Air Temperature Battery Voltage Coolant Pressure EGT Fuel Level Fuel Trim Gear Position Injector Duty Nitrous Pressure Oil Pressure RPM Transmission Line Pressure Throttle Position Transmission Oil Temperature Turbo RPM Wheel Speed Wheel Slip * Above can be displayed without additional sensors. COMPATIBLE WITH: Haltech Platinum Sprint Series Haltech Platinum Sport Series Haltech Pro Plugin Series Haltech Elite Series Haltech Nexus Series

Not Yet Reviewed

$430.00

Racepak Split Collar and Magnet Assemblies

Racepak split collar and magnet assemblies provide mounting platforms for the magnets that trigger the sensor monitoring the revolutions of a shaft. They are typically used on rear-end yokes and couplers to deliver driveshaft rpm data. Racepak collars are available with either two or eight magnets. The 8-magnet collars help detect driveshaft rpm sooner than 2-magnet assemblies and are perfect for automatic transmission-equipped vehicles. Racepak split collar and magnet assemblies are available in a wide range of diameters to fit a variety of applications.

5.0 out of 5 stars ( 5 )

$142.95

Lowdoller Motorsports Fluid Temperature Sensors

Lowdoller Motorsports fluid temperature sensors serve the purpose of real-time monitoring and control of critical fluid temperatures in a motorsports vehicle's engine, transmission, oil, or coolant systems. By providing precise accurate data to the driver or an ECU, these sensors enable performance optimization, prevent overheating and potential damage, and contribute to overall vehicle consistency during racing events or performance driving.

Not Yet Reviewed

$55.00

Lowdoller Motorsports Remote Sensor Mounts

Lowdoller Motorsports' remote sensor mounts provide versatile attachment points for various sensors, facilitating data collection for applications like suspension monitoring, engine and transmission tuning, and even nitrous oxide pressure management. By placing sensors remotely, the mounts help protect sensitive electronic components from high heat and constant vibrations, which could damage them or lead to inaccurate readings. These mounts are available to fit a variety of sensors and vehicle-specific mounting points, offering flexibility for custom builds and different applications.

Not Yet Reviewed

$54.99

—

$64.99

Lowdoller Motorsports Push-Lock Air Shifter Fitting Kits

Lowdoller Motorsports push-lock air shifter fitting kits are designed to provide a quick and easy way to plumb an air shifter system, offering a user-friendly alternative to traditional threaded fittings. Push-lock type fittings can help prevent over-tightening, which can restrict airflow and cause wear on the transmission's synchronizers and gears. These kits allow for smooth, efficient connections for air lines, which results in faster shifts by ensuring a higher volume of air reaches the transmission's shift valve. Select the kit designed for your application to plumb your air shifter system like a pro!

Not Yet Reviewed

$72.99

Edge EAS Temperature Sensors

Edge EAS temperature sensors are supplied with connectors to plug directly into the Edge universal sensor input system. With these sensors for the Expandable Sensory System (EAS) you will be able to monitor several temperatures, like transmission, differential/axle oil, engine coolant, air intake, pre and post intercooler and more. Using the Edge EAS sensors with their universal sensor input and CS/CTS monitors will allow you to view critical temperatures on state-of-the-art products.

Not Yet Reviewed

$77.65

Manufacturer Rebate

Stack Temperature Sensors

Stack Gauges temperature sensors let you know what's going on under the hood. These resistive analogue sensors are available for replacing non-working sensors. Get accurate info on your oil, water, and transmission temperature with replacement sensors from Stack Gauges.

Not Yet Reviewed

$92.99

FuelTech FT450/550 Sportsman Datalogging A Harnesses

FuelTech FT450/550 Sportsman Datalogging A harnesses are designed around a Big Block Chevy, yet these harnesses have extra-long leads that allow them to be used in numerous other applications. They provide a plug-and-play solution to easily incorporate datalogging into any setup equipped with an FT450 or FT550 ECU. These harnesses come pre-terminated to plug directly into essential data logging input channels and have an extra input connector to add up to two more configurable inputs for sensors or buttons. They're also equipped with two extra connectors that allow the use of 10 outputs to control EFI fuel Injectors, ignition control through a CDI box with points input or smart coils (eight coils on wasted spark is not recommended for carbureted V8 applications). Tech specs: * Harness is set up for either VR or Hall effect cam and crank sensors and includes two relays with built-in fuses for main electronics, injectors, and coils * FT450 connector (FT550 A connector) * CPC firewall connector * Each connector has its own label and harness insulation is heat, moisture, and oil-resistant * Pre-terminated connections: for Wide Band 02 Sensor x2, Oil Pressure, Fuel Pressure, Engine Temperature and Transmission Temperature * Drive shaft sensor/2-step connector * Extra Inputs connector: 2 configurable inputs for sensors or buttons * Extra Outputs connector: For DIY expansion to control EFI fuel injectors or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Ignition Expansion Connector: For DIY expansion to control ignition or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Comes with two 40A relays and fuses to power everything—the relays power the ECU, Wideband Nano O2, Peak and Hold drivers, sensors, and extra connectors Contents of package: * Harness and instruction manual

Not Yet Reviewed

$749.00

Manufacturer Rebate

Innovate TC-4 Plus Thermocouple Amplifiers

Innovate's TC-4 Plus devices are 4-channel thermocouple amplifiers for the MTS (Modular Tuning System). These data acquisition components may be used as stand-alone amplifiers for logging directly into LogWorks, or they can be used in conjunction with any other MTS-compliant device to retrieve key temperature metrics. Each of the four inputs of the TC-4 can be configured by the user for EGT range (32-1,999 degrees F; 0-1,093 degrees C) or CHT range (32-572 degrees F; 0-300 degrees C) to measure cylinder head temperatures. The TC-4 Plus can also be used to measure other temperature metrics, such as the turbo inlet and outlet, catalytic converter, transmission, and more. Using the TC-4's serial ports, you can daisy-chain other Innovate devices, such as the XD-16, AuxBox (LMA-3), LC-1, DL-32, and SSI-4.

5.0 out of 5 stars ( 1 )

$137.99

Computech 500 PSI Pressure Monitor Kits

Computech 500 psi pressure monitor kits have a great wide-range pressure sensor that is still extremely accurate in low and high-pressure environments. They are typically used for oil pressure, injected fuel psi, and transmission pressure. The pressure sensor will monitor from 0 to 500 psi. Computech 500 psi pressure monitor kits include a stainless steel pressure transducer and 15 ft. extension cable. They are compatible with most gases and fluids, including gasoline, methanol, and oil.

Not Yet Reviewed

$299.95

Computech Liquid Temperature Replacement Thermocouples

Replace failing thermocouples and continue to accurately monitor liquid temperatures with Computech liquid temperature thermocouples. These replacement probes include compression fitting and will restore precise, reliable water, oil, and transmission temperature readings.

Not Yet Reviewed

$79.95

Racepak IQ3D Drag Racing Digital Dash Recorders

Attention sportsman drag racers: Racepak IQ3D digital dash instruments offer a compact, all-in-one solution for data acquisition. Adding a robust, built-in data logger to the popular IQ3, the drag race versions display information on four user-definable pages—and recorded data is stored on a microSD memory card located on the face of the dash for easy access. You can record engine rpm, driveshaft rpm, oil pressure, water temperature, and battery voltage. Smarter racing; get onboard performance that could change the way you compete ... and win, with Racepak IQ3D. Racepak IQ3D drag racing digital dashes specifications include: * Programmable LED shift lights * User-defined 5-character sensor input names * Four programmable external warnings * Shielded, low-luster display for open cockpit use * Can add up to six additional V-Net channels

5.0 out of 5 stars ( 1 )

$1,849.95

AEM Electronics CD-7 Digital Racing Dash Displays

AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.

3.0 out of 5 stars ( 2 )

$1,699.95

—

$2,151.95

Racepak IQ3SL Street Logger Dash Recorders

Racepak IQ3SL Street Logger dash recorders add data-logging to the popular IQ3S Street display dash. These add-on data acquisition accessories make an ideal solution for vehicles that need full road instrumentation, as well as the ability to record data—combining all functions into one easy-to-use unit! Standard data—such as speed, odometer, turn signals, hi/low beam and parking brake indicators—are displayed, along with programmable shift and warning lights. In addition, these dash recorders feature internal processing to read data from OBDII and most aftermarket ECU and EFI systems. This makes the IQ3SL Street Logger a great option for modern cars or vehicles with modern EFI engine swaps. Racepak IQ3SL Street Logger dash recorder features include: * Displays standard road functions * User-defined shift light output * Displays up to 28 inputs via four page * Shielded, low-luster display for better sunlight viewing * Blue dimmable backlight * Metric and English capable * Gear Indicator * CAN-based and OBDII compatible (adapter cables available) * Four user-defined alarms * Connects to any Racepak V-Net data logger * User-defined 5-character sensor input names * Optional GPS module for speed

Not Yet Reviewed

$1,749.95

Lowdoller Motorsports Universal Pressure Sensors

Lowdoller Motorsports universal pressure senders provide a cost-effective alternative to higher-end sensors, making them an accessible option for adding data logging to your racing setup without significant expense. Built for demanding environments, these pressure sensors offer a broad range of versatility to monitor various fluid or gas pressures (like fuel, oil, or coolant) in vehicles and other systems. They serve as essential components for data logging to provide real-time information to an engine management system (ECU) or data logger. Select the model designed for your application needs.

5.0 out of 5 stars ( 1 )

$41.00

—

$72.00

19 Results Found For "transmission"