Race Electronics Ignitions & Electrical

Racepak Molex Terminal Kits

Racepak Molex terminal kits are used to shorten a cable that needs to terminate. Available with 2- or 3-pin Molex connectors, they include both male and female connectors and corresponding pins. These connectors make it easier to assemble electronic products. Racepak stays ahead of the technology curve, developing data acquisition components for professional drivers and auto enthusiasts to achieve maximum performance!

Not Yet Reviewed

$12.25

—

$15.32

On Sale

Holley EFI 8-Channel CAN EGT Kits

Introducing the Holley EFI 8-Channel CANBus EGT kits, for Holley EFI! Exhaus/Gas/Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to as identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The EGT probes come in different lengths ensuring a clean looking installation. The included stainless steel bungs feature a built-in step, making installation as easy as possible! Kit features: * Compatible with HP or Dominator EFI, and Terminator X EFI * Plug-and-Play 8-Channel CAN EGT module, for quick and easy installation * High-quality 1/4 in. stepped stainless steel EGT weld bungs * Robust 1/4 in. EGT probes, designed to withstand the extreme cylinder pressures * 4 ft. CAN extension harness * Analog output wires, to be used with non-Holley EFI installations * Requires V5 build 100 or newer software/firmware

5.0 out of 5 stars ( 1 )

$1,749.95

$1,573.95

On Sale

Holley EFI Digital Dash I/O Adapter with Wiring Harness Kits

Holley EFI Digital Dash I/O adapter with wiring harness kits offer more performance from your digital dash. Available terminated or unterminated, these vehicle harnesses provide 10 additional inputs/outputs to your 7 in. unit. They can be configured for gauges or switches and data-logged locally through your digital dash. The adapters bring out connections to a waterproof 26-pin connector, similar to ones used on EFI units, and the kits include a USB memory stick to update digital dash firmware that supports the adapter.

4.33 out of 5 stars ( 3 )

$357.95

—

$409.95

$322.15

—

$367.95

Altronics Red Alert Complete Systems

Keep accurate data of those EGT temperatures with Altronics Red Alert complete systems. They're the first data recording units specifically designed to note the engine cylinder exhaust temperatures (EGT). They can document up to eight EGTs and engine rpm throughout the run. These systems include 8 EGT probes, junction box, interface cables, and downloading kit with software.

Not Yet Reviewed

$1,099.99

—

$1,189.99

Holley EFI Single-Channel EGT Kits

Introducing the Holley EFI Single-Channel EGT kits! They keep you in-the-know about what's going on with your engine. Exhaust gas temperature data is critical information when your engine tune-up seems to be on the ragged edge. Knowing the exhaust temp can help you identify potential horsepower left on the table, or pinpoint any weak links in your max effort race engine. Holley offers these EFI Single-Channel EGT kits for non-Holley applications, as well as compatibility with HP Tuners, Dominator EFI, and Terminator X. Order the Holley EFI Single-Channel EGT kit to meet your application needs. Kit features, specs, and parts may include: * Single-Channel CANbus EGT controller module for quick and easy installation with Holley EFI—or Single-Channel Analog EGT controller with unterminated output wires for universal installations (please specify when placing order) * High-quality 1/4 in. stainless steel EGT weld bung * Robust 1/4 in. probe designed to withstand extreme cylinder pressures * Sensor (included) is designed to work with any engine combination, with an open reinforced tip for the fastest response rate and improved shielding

Not Yet Reviewed

$319.95

Computech DataMaxx Bracket Kit Data Loggers

For years, data loggers have been expensive and complicated for the weekend racer. Good news, Computech has changed that with the cutting-edge technology of DataMaxx bracket kit data loggers, along with user-friendly software, and 24/7 weekend tech support. Datamaxx supplies the essential information need, plus a beautiful dash. You don't pay for anything you're not going to use with this kit; and you have the option to upgrade any time. Computech DataMaxx bracket kit data logger features: * DataMaxx main module * Billet aluminum enclosure * 100 samples per second per channel * Multiple CAN bus connections * Multiple rpm channels, magneto-compatible * Switch input channels * Warning light outputs * Multiple analog channels * Battery voltage channel * Sensors: engine rpm, driveshaft rpm, fuel psi, oil psi, water temp, and single EGT probe Computech DataMaxx LCD dash function features: * 10 channels per screen * Unlimited screen configurations * Customizable shift and warning lights * SD memory card port * Variable speed playback (1/10x, 1/4x, 1/2x, 1x, 2x, 4x, 10x, 100x) * Single cable connection * Day/night brightness modes * Eliminates need for conventional gauges

4.0 out of 5 stars ( 1 )

$2,349.95

On Sale

AEM Electronics CD-5 Carbon Digital Racing Dash Displays

AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch

Not Yet Reviewed

$1,299.95

AEM Electronics CD-7 Digital Racing Dash Displays

AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.

3.0 out of 5 stars ( 2 )

$1,649.95

—

$2,151.95

FuelTech FT700 Connector Kits

FuelTech connector kits are essential components for achieving peak electrical performance and reliability in high performance engine applications. Their FT700 connector kits are recommended for those upgrading to the FT700 ECU and need to modify their existing harness for the new connector. Kits include: * Four FT700 connectors (A, B, C, and D) * 120 FT700 Terminals * One CAN A female connector kit with gold plated terminals * Two CAN B female connector kits

Not Yet Reviewed

$179.00

Holley Single-Channel EGT Controllers

Holley Single-Channel EGT controllers are designed for use with a K-type thermocouple using a "mini-K" connector. The module's accurate temperature measurement range is 32-2,282 degrees F (0-1250 C), with an accuracy of +/- 5 degrees F. The module is available in two versions: either CAN 1CH EGT, which is a plug-and-play installation for compatibility with Holley EFI products, such as HP and Dominator EFI systems; or Analog module, 1CH EGT with a "flying lead" with three wires exposed for power, ground, and signal for non-Holley EFI installations. Order the EGT controller suited to your application needs. Plug-and-Play, 1CH EGT controller features: * Supplied harness features two CAN connectors (one male, one female) that plug into the Holley main harness (or P/N: 558-412 kit Dominator only) * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts no thermocouple connected or it failed * Note: before mounting, it is recommended you record the CAN ID Serial number from the sticker on bottom side of the unit for use during software setup * Mounting: EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Software setup * Important note: Requires software and firmware Version 5 Build 31 or later Analog module, 1CH EGT controller features: * Wiring: harness is a "flying lead" with three wires exposed for power, ground, and signal (red wire: power 6.5 V-24.0 V; black wire: ground; and tan wire: Analog output) * Outputs a 0-5 V and can be used with systems that have configurable 5 V inputs * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts thermocouple not connected or it failed * EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Analog setup: analog output scaling is accurate between 0.5 and 4.5 V and covers temperature range of a K-type thermocouple

Not Yet Reviewed

$186.95

Haltech uC-10 Digital Display Dashes

Haltech uC-10 digital dash displays offer crisp, clear, and full color viewing compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. They can also be wired in as a complete standalone unit. The versatility of the uC-10 dashes ensures they can seamlessly integrate into a wide range of vehicles and setups, while offering plenty of scope for sensors and other inputs in a standalone configuration or as an I/O expander in a Haltech environment. Each kit includes dash, connector, cables, momentary switches, and Wi-Fi antenna, along with a Haltech fabric key tag, quick-start guide, and stickers. Features: * Full-color, optically bonded TFT screen * 70-degree minimum viewing angle (vertical and horizontal) * 1280 x 480 resolution, 600+ lumens * IP64 (Dust-tight and protected against water splashes) * 6-digit odometer * 512MB of on-board looped data logging * NSP compatible * 10 user configurable AVIPs * 4 user configurable DPOs * 4 user configurable SPIs * 1 dedicated tachometer input * 1 dedicated alternator excite * 2 ambient light sensors

5.0 out of 5 stars ( 1 )

$1,995.00

Holley Sniper 2 EFI 5 in. Digital Dash Displays

Holley Sniper 2 EFI 5 in. digital dash displays come out of the box, ready to plug-and-play with your Sniper 2 EFI ECU. The 5 in. digital touch screen display is pre-loaded with three easy-to-read layouts that provide critical system information, thanks to the provided magnetic GPS antenna. Also included is the same handheld wizard as the 3.5 in., tuning, and data logging, along with two dash mounting stand offs and a suction cup, allowing you to quickly mount the dash to most flat surfaces in the vehicle, without drilling any holes. Additional notes and features: * Compatible only with Sniper EFI 2 Products * Next Generation mil-spec style M8 positive lock connector for easy and secure installation * Built-in Calibration Wizard allows you to quickly build a base engine calibration for your Sniper 2 EFI powered vehicle, without the need of a laptop * Three default background skins pre-loaded with the option to customize the existing layouts to read exactly what information you want to see * Quickly swipe between multiple monitor screens, with customizable parameters (tune, warm-up, race, drive, etc.) * Provides Real-time ECU tuning, allowing you to dial in your AFR, Ignition Timing, or any other handheld tune able value, such as IAC or Acceleration Enrichment * Expandable storage via included micro-SD, allowing quick access to ECU calibrations, datalogs, or any other files you may use with your Holley EFI system * Capacitive touch--no stylus required * Convenient dimming feature for nighttime driving, simply press the Sniper EFI icon on the background to quickly dim or brighten the screen

5.0 out of 5 stars ( 3 )

$460.95

On Sale

Holley EGT Probes

Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Select the probe needed. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses

Not Yet Reviewed

$128.95

$116.05

—

$128.95

Dakota Digital EFI Interface Modules

With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature

5.0 out of 5 stars ( 6 )

$109.25

14 Results Found For "terminal kit"