Availability
Showing In Stock Items. Show All 208 Items.
Are you running rich or lean? Innovate oxygen sensors will monitor and tell you just what the facts are. These precision sensors collect and feed the data you need to aid in restoring accurate gauging your fuel mixture. They offer replacement Bosch LSU 4.2 and 4.9 sensors for their digital A/F ratio meter and digital wideband gauges. Plus, Innovate wideband systems allow the sensor to be recalibrated for the ultimate in accuracy, maximum performance, and safety!
( 25 )
$84.99
—
$109.99
Racepak AF1 single channel air fuel sensor packages are designed to be utilized with any of Racepak's Vnet (canbus) series of data loggers. They are suitable for use with gasoline or alcohol, with calibration values available for either fuel types. The power supply requirement of 12 to 16 volts enables use with standard 12 volt or 16 volt high performance batteries. Racepak AF1 single channel air fuel sensor packages include: * Heat and water resistant controller with integrated Vnet module * Bosch LSU air/fuel sensor * Wiring harness * Installation instructions * Programmable 0-5 Volt analog output
Not Yet Reviewed
$499.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$368.95
$126.95
—
$368.95
Gather precise rotational speeds with rpm sensors from Racepak. They have a variety of sensors for engine, driveshaft, wheel, clutch, and ring gear to compile data, and the sensors are commonly used in conjunction with Racepak data logger units.
( 5 )
$13.12
—
$239.95
If you've changed anything to higher pressure output then you'll want one of these Racepak powered pressure transducer sensors. They are available in different psi ratings, so you can choose what range best suits your application.
( 2 )
$249.95
AiM Sports pressure sensors are small, lightweight, but well-engineered pressure transducers—and are some of the best in the marketplace today. AiM sensors are IP67 rated, weigh only 34g, are made from stainless steel, and operate between -20 and +135 degrees C. They're designed for the detection of fluid and air pressures in demanding motorsport and automotive applications—and are ideal for high-precision data acquisition or control systems. These transducers can be installed directly onto vehicles or as part of a test stand or dyno. They offer a high level of reliability and endurance, and are protected against the high vibration, shock, and extreme temperatures found in motorsport. Their modular construction and programmable amplifier provide a fast delivery time for standard and custom configurations. Industry standard 3-wire electrical connections allow configuration with most common ECUs and data-logging systems. Aim Sports pressure sensors are race-proven around the world and offer a reliable and cost-effective solution for data acquisition. They're available in different styles and options. Order the model best suited for your application.
( 1 )
$164.99
Collect exhaust samples accurately with Racepak air/fuel sensors. These A/F sensors come with a 13 in. pigtail cable and are compatible with either gasoline or methanol fueled engines. Gasoline application will display ratios between 9.55:1 and 20:1, while methanol will show from 4.22:1 to 8.7:1. Racepak air/fuel sensors can be used with all V-Net products, and can run on 12 to18 V battery systems.
Not Yet Reviewed
$129.95
—
$169.95
Shock travel sensors are linear potentiometers that record the slightest amount of suspension movement. Monitoring the extension and compression of the shock absorbers aids greatly in understanding what the chassis is doing. It is a principal means of evaluating suspension movement and chassis setup. Regardless of your type of racing, Racepak shock travel sensors provide information that is frequently crucial to separating winners from the also-rans. They are usually connected through an analog port of a data recorder (sold separately) and monitored at high sample rates. An analog channel is required for each sensor; a separate sensor is required for each wheel monitored.
Not Yet Reviewed
$479.95
—
$519.95
On Sale
If you're unable to use a thermocouple-style assembly due to limited space availability, Racepak liquid temperature sensors are a great alternate choice. These replacement sensors are for use with Vnet modules and require the adapter harness.
( 2 )
$38.52
$21.19
—
$89.95
Lowdoller Motorsports universal pressure senders provide a cost-effective alternative to higher-end sensors, making them an accessible option for adding data logging to your racing setup without significant expense. Built for demanding environments, these pressure sensors offer a broad range of versatility to monitor various fluid or gas pressures (like fuel, oil, or coolant) in vehicles and other systems. They serve as essential components for data logging to provide real-time information to an engine management system (ECU) or data logger. Select the model designed for your application needs.
Not Yet Reviewed
$41.00
—
$72.00
Knowledge is power and AiM Sports vehicle sensors will provide plenty of knowledge. Each sensor is designed to monitor a critical area of your race car, helping you tune your ride for better performance and greater consistency. Each sensor talks to an AiM sports data logger and display, allowing you to see the information in real time or download it later to analyze it for the next heat.
( 2 )
$77.99
—
$171.99
Infrared sensors are used to monitor the distance to an object, relative to the sensor, when contact cannot be made with the object. Racepak ride height sensors are ideal for use in setting up your vehicle suspension by monitoring the chassis height in relation to the moving ground plane (race track). These sensors with Molex connectors attach to the V-Net cable of any V-Series recorder, or 0-5 V module on a Pro-Series unit (sold separately). They can also be attached to the analog port by using an interface module, rather than the V-Net module. Whichever attachment option is chosen, these ride height sensors will be put into motion—measuring distances!
Not Yet Reviewed
$929.95
Lowdoller Motorsports shock travel sensors offer specific features that make them especially effective for performance applications, providing racers with precise data to optimize suspension tuning, diagnose chassis issues, and improve car performance on the track. The sensors are known for their compact size and compatibility with all major data loggers, making them easy to integrate into a performance vehicle's existing electronics. Select the Lowdoller shock travel sensors designed for your vehicle's suspension setup.
Not Yet Reviewed
$68.00
—
$165.00
On Sale
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$1,599.95
$549.95
—
$1,599.95
If you're looking for an affordable replacement driveshaft speed sensor, check out Lowdoller Motorsports' offering. These driveshaft speed sensors provide high-resolution data logging of driveshaft RPM, allowing for tuning and data analysis in drag racing to identify tire slip, improve traction control, and achieve competitive, repeatable performance by providing direct information about the drivetrain's output. These sensors use ferrous triggers or magnets to generate a signal that is sent to a data acquisition system or ECU, enabling precise control and tuning for better hooking and faster runs.
Not Yet Reviewed
$81.50
—
$91.50
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.
Not Yet Reviewed
$349.95
$192.95
—
$399.95
Racepak un-programmed V-Net modules with sensors are customizable for a variety of applications. This makes them ideal whether replacing worn-out/damaged modules, or simply if you prefer your own programming for the V-Net system. The V-Net ID and sensor type parameters will not be pre-programmed on these modules. As with all V-Net modules connecting to the V-Net cable, they feature plug-and-play installation, and can be linked in any sequence. Repair or further customize your setup with Racepak un-programmed V-Net modules. Order the proper base pressure setting for your application.
Not Yet Reviewed
$329.95
Computech clamp-on temperature sensors are designed for use with Computech's EGT Plus Series, as well as DataMaxx data logger systems. The probe is a 3/16 in. diameter and utilizes a clamp that expands to 2 1/2 in. The probe lead has a male K-type connector on the end and can easily be shortened to your installation. The Computech clamp-on temperature sensors are designed to be used with regular-octane gasoline, high-octane racing gas, ethanol, methanol, and nitro mixtures. They cannot be used with diesel, as a specific diesel exhaust gas sensor is required.
Not Yet Reviewed
$139.95
FuelTech Travel sensors are designed to accurately measure suspension or body movement of your vehicle up to eight inches. They feature 5mm Heim joints for mounting, and are compatible with most ECUs, including FuelTech's Engine Control Units (sold separately). Order the FuelTech Travel sensor model in the application you need for your specific setup. Connector Pinout: --Pin 1 - Ground (Brown) --Pin 2 - Signal (Yellow) --Pin 3 - 5 V (Blue) Note: Requires a FuelTech Travel sensor connector kit (sold separately).
Not Yet Reviewed
$349.00
Whether you're looking for a cylinder head temperature, intake manifold temperature, exhaust gas temperature (EGT), or fluid temperature sensor, Racepak thermocouple sensors have you covered. Racepak also offers adhesive thermocouples that eliminate the need for bung and other sensor mounting methods, making them ideal for a number of surface temperature readings such as shock housing, engine block, fuel tank, fuel pump, electric motor, and battery temperature. These Type-K thermocouple assemblies (Nickel-Chromium/Nickel-Aluminum) are precisely designed for their specific applications and must be used with the appropriate thermocouple amplifier module (sold separately). All probes are terminated with a male 2-pin mini-connector.
Not Yet Reviewed
$158.95
—
$799.95
These AutoMeter wideband oxygen sensor kits are designed to acquire additional information that can be used in your AutoMeter DataPro software. They include an 8 ft. cable to complete the installation.
Not Yet Reviewed
$179.99
Computech weld-in temperature sensors are designed for use with Computech's EGT Plus Series, as well as DataMaxx data logger systems. The probe is a 3/16 in. diameter and utilizes an 1/8 in. pipe thread weld-in bung. The probe is centered in the tube using a compression fitting screwed into the weld-in bung, both of which are included. The probe lead has a male K-type connector on the end and can easily be shortened to your installation. The Computech weld-in temperature sensors are designed to be used with regular octane gasoline, high-octane racing gas, ethanol, methanol, and nitro mixtures. They cannot be used with diesel, as a specific diesel exhaust gas sensor is required.
Not Yet Reviewed
$109.95
Lowdoller Motorsports shock travel sensor mounting hardware is designed to secure shock travel sensors to a vehicle's control arms and chassis without requiring welding, providing a way to collect real-time data on suspension movement for performance tuning. The collected data helps users understand how the suspension is reacting, allowing them to identify and correct issues, leading to improved performance, better handling, and increased tire performance. This shock travel sensor mounting hardware is available for compatibility for various suspension setups, from stock to advanced drag racing applications. Shock travel sensors sold separately.
Not Yet Reviewed
$40.00
On Sale
The name of the game in racing is traction, and keeping your tires firmly planted under all track conditions and surface abnormalities have become a science. Monitoring suspension deflection through shock absorber movement is the common method of tracking suspension and tire performance. Racepak users can employ these shock absorber travel sensors to monitor even the slightest amount of shock travel or tire shake. Shock travel graphs will provide you with the data you'll need to tune 'to the track' more precisely. These door car kits are available for front or rear shock travel. The front shock travel sensor kits contain two 4 in. linear shock travel sensors, two signal conditioning modules, and an analog extension cable. The rear shock travel sensor kits contain two 8 in. linear shock travel sensors, two signal conditioning modules and an analog extension cable.
Not Yet Reviewed
$1,449.95
$942.95
—
$1,349.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
