Race Electronics Ignitions & Electrical

Lowdoller Motorsports Remote Sensor Mounts

Lowdoller Motorsports' remote sensor mounts provide versatile attachment points for various sensors, facilitating data collection for applications like suspension monitoring, engine and transmission tuning, and even nitrous oxide pressure management. By placing sensors remotely, the mounts help protect sensitive electronic components from high heat and constant vibrations, which could damage them or lead to inaccurate readings. These mounts are available to fit a variety of sensors and vehicle-specific mounting points, offering flexibility for custom builds and different applications.

Not Yet Reviewed

$54.99

—

$64.99

FuelTech Remote Mount Pressure Sensor Blocks

FuelTech's remote pressure sensor mounting blocks are the perfect solution to mount your pressure sensors in one common place. Each port is individually connected from top-to-bottom, allowing you to run up to four separate pressure sensors on a small lightweight billet mounting block away from vibration and for easier access. (Sensors are sold separately.)

1.0 out of 5 stars ( 1 )

$89.00

Racepak IQ3 Remote Buttons

Racepak IQ3 remote buttons connect to the IQ3 digital dash via the harness—to program and advance through the data logging screens. These accessories are invaluable to your IQ3 system.

Not Yet Reviewed

$112.95

—

$195.95

Computech DataMaxx Remote SD Modules

Computech DataMaxx Remote SD Modules are designed specifically for vehicles that are using magneto's. Magneto's disperse a wide range of electromagnetic noise and are necessary to get the SD circuit physically far away from that radius of noise corruption. The remote SD modules come with a 15 ft. cable and can also be used as a convenient way to mount them in an easy to reach location.

Not Yet Reviewed

$379.95

Biondo Throttle Stops

Biondo CO2-operated throttle stops hook to the throttle linkage and draw only a 1/4 amp. They work with or without a timer, can be used in place of a 2-step box, and won't affect carb or pedal height. A bottle kit is not included.

5.0 out of 5 stars ( 2 )

$259.99

—

$262.99

AEM Electronics CD-7 Digital Racing Dash Displays

AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.

3.0 out of 5 stars ( 2 )

$1,649.95

—

$2,151.95

Biondo Elite 625 Delay Boxes

Biondo Elite 625 delay boxes have the ability to directly control any V2 dial display boards. Every time you change your dial on the Elite 625, your dial display board is automatically updated, eliminating the need to enter your dial a second time on another unit. With Biondo's "Set and Go" push-button mode, the press of a button (SET) sets the trans-brake. Then the press of a separate second button (GO) starts the delay timing. Additional options include the ability to Tap Up and Down on the same pass. The setting of the S.L.E. by the trans-brake push-button can also be turned off. The Replay Tach can now record up to nine passes and replay them on the screen. Both Bracket and Pro Mode have three 4-stage timers and can shift up to five times by RPM and/or Time. Biondo Elite 625 delay boxes are available with a red, green, or blue screen. Select the one you prefer. Features: * Crossover delay box * CrossTalk compatible * Day and Night intensity settings for the dial board * Five push-button modes * 1 or 2 hits at the tree with built in "How Late" feature * Tap up or tap down to .001 seconds * Multi-tap feature * Push-button interrupt safety feature * Seven independent outputs * Three separate 4-stage timers (programmable to thousandths) * Dedicated (SLE) Starting Line Enhancer output * Dedicated Line Lock output * Adjustable Burn-out timer * Dedicated high-current shift output * Built in digital tachometer with peek rpm and replay feature * 9-pass memory replay tach * Selectable 4-, 6-, and 8-engine cylinder setting * Compatible with most ignitions * Driver Reaction Tester with LED * Large 4-line LCD (see Dial-ins and Delay at the same time) * Backlit keypad and screen * Glove-friendly * Separate remote mount I/O board to simplify wiring * Full status LEDs on remote I/O board

Not Yet Reviewed

$748.99

—

$783.99

Manufacturer Rebate

Dedenbear Lightning Delay Boxes

Dedenbear Lightning delay boxes feature a billet aluminum enclosure that keeps all of the precision circuitry protected. The small multi-functional units' can be every racers little helper! Features include: * Four different delay modes * Tap/tap down * Starting line launch control * Two 4-stage throttle stop/nitrous timers * Adjustable transbrake lockout * East touch illuminated keypad * Lighted display for easy nighttime viewing * Independent line lock output * Remote dial-in board display output * Accidental transbrake release protection

2.0 out of 5 stars ( 1 )

$709.99

—

$746.99

Racepak Smartwire Switch Modules

Racepak switch modules provide the ability to use existing switches in conjunction with a SmartWire module. Switches are connected to the spade connectors of the module, and switch data is routed to the SmartWire via a single cable. These modules allow your input for 16 remote switches. Adding a second switch module is quick and easy, through the use of a short jumper cable between the two modules. Racepak SmartWire switch modules are machined from billet aluminum and anodized black.

Not Yet Reviewed

$388.95

On Sale

Clearance

Racepak SmartWire To Switch Panel Cables

Racepak Smartwire to Switch Panel Cables are the quickest and easiest way to connect a switch panel, switch module, or keypad to the Racepak Smartwire unit. Ranging from 6 in. to 10 ft., these cables are the perfect choice for almost any application from drag racing to off-road and even pulling! Connect your remote module with Racepak Smartwire to switch panels today!

Not Yet Reviewed

$105.95

$69.50

Racepak Module PT2

For your data recorder to be able to monitor an analog channel it must receive a signal that it can recognize. The Racepak Module PT2 convert the analog parameters to a standard 0-5 volt signal required by the recorder. The transducer module (combination sensor and signal conditioning modules) provides direct connection to the measured parameter, such as fuel or oil pressure. The signal conditioning module allows the connection of remote sensors, such as thermocouples or position sensors, to the data recorder.

Not Yet Reviewed

$409.95

Computech RaceAir PC Download Kits

Computech RaceAir PC download kits allow you to stream weather directly from your RaceAir Pro Weather Station to your PC. They will essentially provide you with the same information as the RaceAir Remote with pager weather stations, but at a fraction of a cost. However, because the hand-held weather stations are not designed to run nonstop, you have to take care to make sure the sun is not heating up the sensors—or that moisture or rain is getting on the unit. RaceAir PC Weather Station download kits feature: * 40 ft. of cable * Power supply for RaceAir * Weather Pro software: Easily graph weather variables, time stamp runs on the graph, chart for easy data search, and exportable to Excel

Not Yet Reviewed

$174.95

Biondo Mega 475 Delay Boxes

Biondo Racing Products introduces the Digital Delay Mega 475 Delay Box with built-in Mega Dial controller. Every time you change Your Dial on the Mega 475, your ET is automatically updated on the Dial Display board. No need to enter Your Dial a second time on another unit. Biondo started with the popular Mega 450 and improved on it by adding some new racer-requested features, including the Set and Go push-button mode which is similar to Z-Force. Additional new features include the ability to directly control any V2 Dial Display Board, and the ability to Tap Up and Down on the same pass. The Replay Tach can now record up to nine passes and replay them on the screen. Bracket and Pro Mode both have two 4-Stage timers and can shift up to 5 times by RPM or Time. Features / Specifications: * Face Size: 6 11/16 in. x 5 in. x 1 3/4 in. * Overall Size: 8 11/16 in. x 5 in. x 1 3/4 in. * 12 and 16 volt compatible * 4 - Push-button inputs * 4 - 12 amp outputs -- (Transbrake, SFO, Throttle Stop and Shift) * Built-in controller for V2 Dial Display boards * Crossover Delay Box * CrossTalk Compatible * Controls any V2 Mega Dial Display Board * Day and Night intensity settings for the Dial Board * 5 push-button modes * Set and Go push-button mode (similar to Z-Force) * 1 or 2 hits at the tree with built in 'How Late' feature * Tap Up or Tap Down to .001 seconds * Push-button Interrupt safety feature * Two separate 4-Stage Timers (programmable to thousandths) * Starting Line Enhancer (SLE) * Shift up to 5 times by RPM and/or Time * Built in digital tach with peek RPM and Replay Feature * Selectable Function Output (SFO) -- Line Locks for anti-roll staging -- Starting Line Enhancer -- Second 4 Stage Timer -- Spare Transbrake * Driver Reaction Tester * The large backlit screen displays 4 lines of data at once * Backlit keypad * Glove-friendly * Compatible with 4, 6, and 8 cylinder engines * Compatible with most ignitions

5.0 out of 5 stars ( 1 )

$637.99

—

$659.99

On Sale

Racepak USM Connector Cables

Racepak USM connector cables are designed to allow easy connection of Racepak Universal Sensor Modules to a variety of data acquisition components. They are available to connect fluid temperature, rpm, shock travel, ride height, infra-red temperature, 0 to 5 V, and TI-style pressure sensors.

Not Yet Reviewed

$67.55

Biondo Elite Dial Crossover Delay Boxes

Biondo Elite dial crossover digital delay boxes can control any V2 (four wire) dial display boards, including multiple and dual view boards. They offer several special features, like the ability to shift up to five times, the ability to shift by rpm, Biondo's Set and Go push-button mode, multi-tap feature, and their built-in burn-out timer that makes sure the burn-outs are done the same every time. And Elite dial crossover boxes won't leave you in the dark! The screen is backlit, and the switches are exclusively ringed with a white backlight, making them easy to operate at night. Additional features: * CrossTalk compatible * Full bracket and Pro Modes * Six day and night intensity settings for the dial display board * Plain text on the screen to indicate what's displayed * Separate I/O board to simplify wiring * Status LEDs on I/O board * Driver's reaction tester -- Built-in LED * Three 2-stage timers (programmable to thousandths) * Programmable throttle stop override * Built in digital tach with peak rpm recall * Five push modes * Seven independent outputs: -- Trans-brake -- Starting line enhancer -- Line lock -- Timer 1 (40 Amp) -- Timer 2 (40 Amp) -- Timer 3 (40 Amp) -- Shift (40 Amp) * All outputs are fused

Not Yet Reviewed

$748.99

Manufacturer Rebate

Dedenbear Command Center Delay Boxes

How did Dedenbear's Command Center delay boxes earn such a lofty title? Just check out all of the features jammed into this compact little box command center and you'll see for yourself! Features include: * Four types of delay boxes * Two separate 4-stage throttle stop timers * Independent starting line output * RPM activated switch * Digital tachometer * Pro/Full tree button, to race a different class at the touch of a button * Lighted display * Lighted keypad with number and scroll keys * Highest amperage output capabilities * Instant memory * How-late feature * Crossover compensation * Last-chance feature

Not Yet Reviewed

$829.99

Manufacturer Rebate

Dedenbear Linkage Throttle Stops

Dedenbear offers linkage throttle stops for virtually any application and budget. They come with a needle valve adjuster to control the opening rate, quick disconnect fittings, a stainless steel solenoid and cylinder, and high-temperature seals. All steel parts are plated to protect against corrosion. All linkage throttle stops are available with Dedenbear's CO2 bottle kits.

Not Yet Reviewed

$1,301.99

17 Results Found For "remote"