Race Electronics Ignitions & Electrical - hubs KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

AiM Sports Data Hubs

AiM Sports Data Hubs solve the problem of lots of data, many peripherals, and a whole bunch of cables. Offering a cleaner, efficient acquisition of data, these CAN connection multipliers work as an interface between your AiM logger and its peripherals. And, they transmit all of the information you need to your logger with only one cable! Data Hubs can be connected in sequence in order to increase the number of peripherals which can be connected, and they're available in two versions—2-way or 4-way hubs. AiM Data Hubs will hook you up to a really "neat" way to collect data!

5.0 out of 5 stars ( 1 )

$85.00

—

$1,499.00

AiM Sports Patch Cables

Connect your sensors, cameras, and data loggers with AiM Sports patch cables. These replacement cables will help extend their reach and make your wiring setup easier. AiM offers several styles to fit their loggers, including thermocouple extensions and dual thermocouple Y-cables. Dozens of cable types are available for automotive, drag race, Jr. drag race, street performance, and kart applications. Keep the data flowing efficiently and accurately through AiM Sports patch cables.

5.0 out of 5 stars ( 2 )

$36.00

AiM Sports LCU-One Lambda Controllers

If your target is peak power, then AiM LCU-One Lambda controllers should be part of your engine-tuning plans. The precise mixture of air and fuel needs to be known for optimum performance. AiM Lambda controllers utilize proven wideband Bosch LSU 4.9 probes and can detect precise values from 0.65 to 1.6 to perfect your engine tuning. By offering configurability of Stoichiometric ratios, the LCU-Ones can be used on most gas, diesel, or alternative fuel engines. The controllers are available in three versions: CAN, analog, and CAN+analog. All of the data you need to hit peak efficiency--and keep it that way--is at your fingertips inside the AiM LCU-One Lambda controllers.

Not Yet Reviewed

$499.00

Haltech TCA-8 Eight Channel Thermocouple Amplifiers

Haltech's vast array of data acquisition components includes the TCA-8 Eight Channel Thermocouple Amplifier--a direct plug-and-play, compatible with a NEXUS VCU, an Elite ECU CAN port, Elite ECU harness, CAN connector, or multiple CAN device installation using an Elite 4 Port CAN HUB. * Includes: Eight Channel Thermocouple Amplifier, CAN cable, DTM-4 to Circular Connector Cable 1200mm / 4-ft., Quick Start Guide * Suits: Elite and NEXUS Series ECUs only

Not Yet Reviewed

$549.00

AiM Sports MXP Data Loggers

AiM Sports MXP data loggers represents a huge leap forward in racing display flexibility and expandability—at the highest level—giving you the required tools for winning performance. The MXP offers more display area than the MXS 5 in. display, in a similar dimension. The dash loggers are provided with lights for integrated gear change indication and alarms in multiple colors that are totally configurable with drag and drop. They are equipped with Wi-Fi, USB connectivity, a 4m GPS module, and a 9-axis inertial platform. When you need to know, AiM Sports MXP data loggers are the instrumentation you need to use! Features and specs include: * High-contrast 6 in. TFT display * Anodized aluminum body; metallic push buttons * Resolution: 800 x 480 pixels * Contrast: 600:1 * Brightness: 700cd/m2--1,100 Lumen * Ambient light sensor: Yes * Fully user configurable * 5 configurable RGB alarm LEDs * 10 configurable RGB LED shift light array * ECU connections: CAN, RS232 or K-Line * ECU compatibility: 1,000+ industry leading ECUs * Expansion CAN connection: 4.00 m GPS module, channel expansion, TC hub, Lambda controller, SmartyCam HD * Analog inputs: 8 fully configurable, max 1,000 Hz each * Digital inputs: 4 speed inputs, lap signal, coil rpm input * Digital outputs: 2 (1 A max each) * Second CAN: Yes * Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer * Internal memory: 4 GB * Connectors: 2 Motorsport connectors and 1 binder connector * Power consumption: 400 mA * IP65 waterproof * Real-time fully configurable math channels What comes in the box: * MXP * GPS module with cable * USB cable * 37 pins standard harness * Race Studio 3 software

Not Yet Reviewed

$1,499.00

—

$2,899.00

AiM Sports 712 Binder Cap with O-ring Seal

AiM Sports stainless steel 712 binder cap with O-ring seal is designed for use in sealing any unused AiM 712 (screw-type) female port from the elements. The O-ring seal keeps dust, dirt, and water out of 3-, 4-, 5-, or 7-pin female ports found on AiM Mychrons, AiM Evo data-loggers, AIM data hubs, and more.

Not Yet Reviewed

$7.99

ARC Sensor Integration Modules

ARC model SIM-8 sensor integration modules will greatly simplify wiring sensors into your ECU. With only one cable wired to the ECU, it provides a convenient hub to tie-in up to eight separate sensors. A green LED indicates the presence of +5 V from the ECU. Each sensor is connected to a 4-position terminal block which has provisions for +5 V from the ECU, ECU ground, signal, and shield. These modules are also available with four ECU controlled relays.

Not Yet Reviewed

$261.99

AiM Sports XLog Data Loggers

The AIM Sports XLog data loggers are a compact, screenless data acquisition system designed for motorsports where space is limited, such as in motorcycles, single-seaters, or tight car cockpits. These small devices provide the logging power and expandability of larger AiM systems like the Solo 2 DL but in a significantly smaller rugged package. Key features and benefits: * Compact and lightweight—the device is specifically designed to fit in tight spaces (e.g., inside fairings) while delivering full-scale data gathering capabilities similar to larger units, such as the Solo 2 DL * Rugged construction—waterproof and durable design ensures consistent performance in harsh, open-cockpit racing environments * High performance and capacity—data logger device offers a 4 GB internal memory with the option of a removable 16GB USB-C memory stick for long-duration logging * Comprehensive Vehicle Dynamics—device includes a 6-axis 100Hz Inertial Measurement Unit (IMU) to measure 3D acceleration and angular velocity (pitch, roll, and yaw), helping analyze braking, cornering, and chassis behavior * Seamless Data Analysis—data is easily managed via Wi-Fi or USB-C in Race Studio 3 software, allowing for deep analysis of driver performance, lap times, and vehicle data * ECU Connection—interfaces with thousands of pre-defined vehicle ECUs via CAN, RS232, or K-Line, as well as providing an RPM input * Custom protocols—users can develop their own protocols using the CAN Builder feature in RaceStudio 3 * Extensive expandability—device features a CAN expansion port to connect modules like the ACC3 (analog sensors), Lambda controllers, and Data Hubs

Not Yet Reviewed

$699.00

AiM Sports MXS 1.3 Data Loggers

The Aim Sports MXS 1.3 data loggers are a compact, full-color TFT display offering high-contrast viewing for small cockpits. The MXS 1.3 data loggers provide comprehensive data acquisition from ECUs, GPS, internal accelerometers, and sensors, while also offering Wi-Fi connectivity, customizable alarm LEDs, and broad expandability for performance tuning. Roof mountable versions are also available. Choose the AiM MXS 1.3 data logger model that best suits your specific needs. Key purposes, features and benefits: * The MXS 1.3 is designed for compact cockpits where space is limited but high-level data analysis is required * The unit is housed in an anodized aluminum case and is waterproof (IP65 or IP67 depending on model selected) * Superior visibility and design—the data logger features a 5 -inch TFT high-contrast display with an ambient light sensor that automatically adjusts backlight brightness for optimal viewing in various lighting conditions * Advanced Data Acquisition—the system collects data from over 2,000 different ECU protocols, GPS09c module, internal 3-axis accelerometer and gyro, and eight analog/digital inputs * Highly configurable display—users can create custom screens, choosing from a wide library of page styles to display RPM, speed, water temp, oil pressure, and lap times * Convenient connectivity and data review—device features integrated Wi-Fi for wireless data download and configuration up to 50 meters away (the system uses Race Studio 3 software to review and analyze performance data) * Safety and performance tools—includes 6-8 fully configurable RGB alarm LEDs for critical alerts, plus two digital outputs for automating external systems like fans or pumps * Expansion capabilities—the device supports up to 8 expansion modules (such as SmartyCam 3, TC Hub, or Lambda controller) via CAN network * The MXS 1.3 is designed for easy installation, using motorsport-grade connectors to ensure reliable operation in high-performance applications * The roof-mounted module version minimizes signal obstruction, ensuring faster and more accurate track mapping, positioning, and lap times

Not Yet Reviewed

$2,899.00

9 Results Found For "hubs"