Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
20 Results Found For "end"
Showing In Stock Items. Show All 30 Items.
Holley EGT Probes
Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Select the probe needed. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses
Not Yet Reviewed
$124.95
—
$128.95
On Sale
Racepak SmartWire To Switch Panel Cables
Racepak Smartwire to Switch Panel Cables are the quickest and easiest way to connect a switch panel, switch module, or keypad to the Racepak Smartwire unit. Ranging from 6 in. to 10 ft., these cables are the perfect choice for almost any application from drag racing to off-road and even pulling! Connect your remote module with Racepak Smartwire to switch panels today!
Not Yet Reviewed
$89.95
$50.70
—
$111.95
Biondo Throttle Stop Ball Joints
Throttle stops are strategic tools used by racers to control and limit the amount of throttle opening, gaining performance and consistent ETs. Maintaining their operation is important. Service your Biondo throttle stops with Biondo ball joints to ensure the proper fit and function. They are available in different sizes to properly maintain your throttle stop. Select the correct size for your T/S.
Not Yet Reviewed
$24.99
Biondo Switch Panel Extension Cables
Biondo extension cables increase the length of the cable between the switch panel and the relay board. Available in three lengths, they install easily with all digital delay switch panel products. Select the Biondo switch panel extension cables with the extra length needed for your setup.
Not Yet Reviewed
$59.99
—
$69.99
Lowdoller Motorsports Universal Pressure Sensors
Lowdoller Motorsports universal pressure senders provide a cost-effective alternative to higher-end sensors, making them an accessible option for adding data logging to your racing setup without significant expense. Built for demanding environments, these pressure sensors offer a broad range of versatility to monitor various fluid or gas pressures (like fuel, oil, or coolant) in vehicles and other systems. They serve as essential components for data logging to provide real-time information to an engine management system (ECU) or data logger. Select the model designed for your application needs.
Not Yet Reviewed
$41.00
—
$72.00
Racepak V-Net Tee Cables
All Racepak V-Net systems must be equipped with a tee cable to install the two terminator caps (one male and one female) necessary for the operation of the system. Just like the ends on the V-Net cables, all V-Net tee cables and terminator caps are blue. Racepak interface modules can also use tee cables, but they are not required for the system to operate properly. Instead, they allow you to create a branch in the system. Black interface tee cables and dust caps are used for the purposes their names indicate. Racepak gauge tee cables are used to connect Intelli-Gauges to a V-Net cable. After the first gauge, each subsequent gauge is connected with a gauge-to-gauge jumper cable.
( 1 )
$16.14
—
$101.95
Racepak Driveshaft Sensor Mount Brackets
Racepak driveshaft sensor mount brackets allow you to easily fasten any 5/16 in. driveshaft sensor to a 9 in. center section. These L-shaped supports feature slotted mounting for easy adjustments and snag-free, rounded-off ends. No fabrication is necessary when you use Racepak driveshaft sensor mount brackets.
Not Yet Reviewed
$40.95
Computech Weld-In Temperature Sensors
Computech weld-in temperature sensors are designed for use with Computech's EGT Plus Series, as well as DataMaxx data logger systems. The probe is a 3/16 in. diameter and utilizes an 1/8 in. pipe thread weld-in bung. The probe is centered in the tube using a compression fitting screwed into the weld-in bung, both of which are included. The probe lead has a male K-type connector on the end and can easily be shortened to your installation. The Computech weld-in temperature sensors are designed to be used with regular octane gasoline, high-octane racing gas, ethanol, methanol, and nitro mixtures. They cannot be used with diesel, as a specific diesel exhaust gas sensor is required.
Not Yet Reviewed
$109.95
Racepak Pressure Transducer Hose Extensions
Racepak pressure transducer hose extensions help to minimize harmful vibrations to a pressure or vacuum sensor. These braided steel hose extensions are engineered for the harsh conditions of the racing environment. They measure 4 in. long and include 1/8 in. NPT male and female ends. Race smart--choose Racepak products!
Not Yet Reviewed
$44.02
Computech Clamp-On Temperature Sensors
Computech clamp-on temperature sensors are designed for use with Computech's EGT Plus Series, as well as DataMaxx data logger systems. The probe is a 3/16 in. diameter and utilizes a clamp that expands to 2 1/2 in. The probe lead has a male K-type connector on the end and can easily be shortened to your installation. The Computech clamp-on temperature sensors are designed to be used with regular-octane gasoline, high-octane racing gas, ethanol, methanol, and nitro mixtures. They cannot be used with diesel, as a specific diesel exhaust gas sensor is required.
Not Yet Reviewed
$139.95
Computech Male K-Type Connectors
Computech male K-type connectors will allow you to replace the end of any weld-in EGT probe. When installing the connectors, be sure to run the red wire to the negative terminal and the yellow wire to the positive terminal.
( 1 )
$11.95
Computech EGT Plus Monitors
Computech EGT Plus monitors are one of the most accurate dual channel exhaust gas temperature systems available today. They are designed to monitor not only exhaust gas, liquid, tire, and track temperatures, but also engine rpm. The monitors feature record options that show max and beginning and end of run readings, and they can be activated via remote switch, trans-brake event, or in continuous mode.
Not Yet Reviewed
$379.95
FAST Serial-to-USB Conversion Cables
FAST Serial-to-USB conversion cables provide the link between your laptop and FAST's 30104 5-ft. long communication cable. These economical cables feature a USB connection on one end and a serial bus connection on the other. They're ideal for FAST XFI and E7 systems that require a conversion cable.
Not Yet Reviewed
$46.95
Computech Throttle Position Kits
Monitoring what happens to your car down the track is extremely important, but so is being able to monitor what you, the driver, did. Did you let off the throttle before or after the finish line? How much did you let off? How much mph did that kill? Computech throttle position kits can help answer these questions. The kits monitor exactly what you did at the top end and increase your chances of reproducing successful, consistent results.
Not Yet Reviewed
$299.95
Racepak Split Collar and Magnet Assemblies
Racepak split collar and magnet assemblies provide mounting platforms for the magnets that trigger the sensor monitoring the revolutions of a shaft. They are typically used on rear-end yokes and couplers to deliver driveshaft rpm data. Racepak collars are available with either two or eight magnets. The 8-magnet collars help detect driveshaft rpm sooner than 2-magnet assemblies and are perfect for automatic transmission-equipped vehicles. Racepak split collar and magnet assemblies are available in a wide range of diameters to fit a variety of applications.
( 5 )
$142.95
Racepak V-Net Cable Terminator Caps
Finish off your V-Net module using one of these Racepak V-Net cable terminator caps. They're available in either male or female configurations to fit your connection type.
( 1 )
$30.70
Racepak Contact Closure Driveshaft Sensors
Racepak contact closure driveshaft sensors detect driveshaft or wheel rpm. Designed to work with a variety of Racepak data loggers and dashes, these plastic sensors feature a 5/16 in. fine thread pitch and are triggered using magnets. Monitor your driveshaft's rotation with Racepak contact closure sensors.
( 1 )
$161.95
AiM Sports Patch Cables
Connect your sensors, cameras, and data loggers with AiM Sports patch cables. These replacement cables will help extend their reach and make your wiring setup easier. AiM offers several styles to fit their loggers, including thermocouple extensions and dual thermocouple Y-cables. Dozens of cable types are available for automotive, drag race, Jr. drag race, street performance, and kart applications. Keep the data flowing efficiently and accurately through AiM Sports patch cables.
( 2 )
$36.00
On Sale
Racepak ECU Interface Cables
Racepak ECU interface cables are adapter harnesses used to connect the CAN bus data stream from your existing ECU to a Racepak IQ3S (Street Dash), IQ3D (Drag Dash), or Racepak Universal CAN module. Once this CAN cable is connected and properly set up, data from the ECU is then available for use with the Racepak IQ3S, IQ3D or Racepak Universal CAN module.
Not Yet Reviewed
$79.95
$45.07
Clearance
Stack Wiring Harness Extensions
Stack wiring harness extensions are ideal for those creating a custom gauge setup when utilizing Stack data systems and displays. Available in different sizes and lengths, each extension cable is terminated with Mini Sure Seal (MSS) connectors offering sealed, vibration-resistant, waterproof performance. Get the extra length needed to make your Stack data and display sensor inputs and network connections just the way you want. Select the harness extension size and length needed.
Not Yet Reviewed
$117.99
$77.50
—
$96.99
