Availability
Showing In Stock Items. Show All 10 Items.
Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Select the probe needed. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses
Not Yet Reviewed
$124.95
—
$128.95
AiM Sports stainless steel 712 binder cap with O-ring seal is designed for use in sealing any unused AiM 712 (screw-type) female port from the elements. The O-ring seal keeps dust, dirt, and water out of 3-, 4-, 5-, or 7-pin female ports found on AiM Mychrons, AiM Evo data-loggers, AIM data hubs, and more.
Not Yet Reviewed
$6.00
Holley Single-Channel EGT controllers are designed for use with a K-type thermocouple using a "mini-K" connector. The module's accurate temperature measurement range is 32-2,282 degrees F (0-1250 C), with an accuracy of +/- 5 degrees F. The module is available in two versions: either CAN 1CH EGT, which is a plug-and-play installation for compatibility with Holley EFI products, such as HP and Dominator EFI systems; or Analog module, 1CH EGT with a "flying lead" with three wires exposed for power, ground, and signal for non-Holley EFI installations. Order the EGT controller suited to your application needs. Plug-and-Play, 1CH EGT controller features: * Supplied harness features two CAN connectors (one male, one female) that plug into the Holley main harness (or P/N: 558-412 kit Dominator only) * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts no thermocouple connected or it failed * Note: before mounting, it is recommended you record the CAN ID Serial number from the sticker on bottom side of the unit for use during software setup * Mounting: EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Software setup * Important note: Requires software and firmware Version 5 Build 31 or later Analog module, 1CH EGT controller features: * Wiring: harness is a "flying lead" with three wires exposed for power, ground, and signal (red wire: power 6.5 V-24.0 V; black wire: ground; and tan wire: Analog output) * Outputs a 0-5 V and can be used with systems that have configurable 5 V inputs * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts thermocouple not connected or it failed * EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Analog setup: analog output scaling is accurate between 0.5 and 4.5 V and covers temperature range of a K-type thermocouple
Not Yet Reviewed
$186.95
Whether you're looking for a cylinder head temperature, intake manifold temperature, exhaust gas temperature (EGT), or fluid temperature sensor, Racepak thermocouple sensors have you covered. Racepak also offers adhesive thermocouples that eliminate the need for bung and other sensor mounting methods, making them ideal for a number of surface temperature readings such as shock housing, engine block, fuel tank, fuel pump, electric motor, and battery temperature. These Type-K thermocouple assemblies (Nickel-Chromium/Nickel-Aluminum) are precisely designed for their specific applications and must be used with the appropriate thermocouple amplifier module (sold separately). All probes are terminated with a male 2-pin mini-connector.
Not Yet Reviewed
$161.95
—
$819.95
Have you lost a cable? We offer these Innovate LM-2 replacement cables to work with your Innovate LM-2 meter. They are available in a variety of styles, lengths, and types. Whether you need a USB cable or just a replacement power cable, we will have you covered with these Innovate LM-2 replacement cables.
( 5 )
$20.99
Racepak SD and micro SD components allow you to save and read on a PC all the important data you've recorded with your data logger. This will help you more easily make the changes necessary to improve the performance of your vehicle. For all your SD and micro SD component needs, Racepak Data Systems has you covered.
Not Yet Reviewed
$51.19
RaceSense Tire Gauge protective rubber cases help keep your gauge looking and operating like new. They also provide a better grip when you get stuck racing in adverse weather conditions. Keep your FastMate Racing pyrometer in optimal condition with an assist from RaceSense Tire Gauge protective rubber cases.
Not Yet Reviewed
$35.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
