Availability
Showing In Stock Items. Show All 26 Items.
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.
Not Yet Reviewed
$349.95
$192.95
—
$399.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$368.95
$126.95
—
$368.95
Racepak V-Net connector modules are used to convert the CAN data stream into a V-Net CAN bus data stream compatible with the Racepak V-Net system. This data is then available for use with the full range of Racepak V-net devices, including on-board displays, real-time telemetry, and data-logging applications. The Racepak V-Net connector modules provide setup capability to accommodate selection of scaling units, data-logging sample rates, and even custom sensor calibration.
( 2 )
$199.95
—
$399.95
Manufacturer Rebate
Innovate's LM-2 digital air/fuel ratio meters combine an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The meters' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s' self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2s also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. With the provided LM Programmer software, these analog outputs may also be configured by the user. Innovate's LM-2s are available in single wideband and dual wideband O2 configurations. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool, read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card (included) * Playback log data on screen with powerful LogWorks software (included) * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC
( 11 )
$550.99
—
$712.99
On Sale
AEM 22-channel CAN sensor modules provide a way for users with carbureted vehicles to add an AEM CD digital dash display. They also let users with existing CAN-based devices add more channels to the display for viewing and/or data logging. These 22-channel modules convert analog, digital, and frequency inputs into an AEMnet CAN bus signal that can be transmitted to AEM's CD-5 carbon and CD-7 digital dashes. AEM Electronics 22-channel CAN sensor module includes: * Wiring harness with 36 in. flying leads and pre-wired CAN cable * IP65-rated enclosure is dust-tight and water-resistant * Daisy-chain two modules together for additional channels (modules sold individually) * Four dedicated 0-5 V analog inputs * Four temperature (thermistor) inputs * Four user-configurable inputs for 0-5 V, temp (including RTD) * One dedicated fuel level input (0 to 250 ohm range) * Six digital inputs, active low, protected to about 18 V, frequency, duty cycle or simple switch * One tach input, trigger when low, 12 V internal pull up * Two VR pair frequency inputs (crank, wheel, or driveshaft speeds) * Jumper selectable CAN bus speeds, 250k, 500k, 1M * Jumper selectable terminating resistor * Jumper selectable header length, 11 bit or 29 bit
Not Yet Reviewed
$413.95
$371.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.
Not Yet Reviewed
$189.95
—
$224.95
On Sale
AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch
Not Yet Reviewed
$1,149.95
—
$1,599.95
$1,033.95
—
$1,438.95
On Sale
Collect the data you need with these Edge universal sensor input harnesses. These harnesses are designed to read any 0-5 V signal and convert it into useful data that can be displayed on your Edge CS or CTS. Using one of these Edge universal sensor input harnesses will allow you display a variety of custom gauges and values on your CS or CTS programmer, making it an even more versatile tool for your vehicle.
Not Yet Reviewed
$240.95
$216.85
Manufacturer Rebate
Innovate LM-2 Ultimate shop kits set you up to dial in maximum horsepower. The Ultimate shop kits are available in single or dual channel versions and include 18 ft. sensor cable, exhaust clamp, inductive clamp, and bung/plug. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC
Not Yet Reviewed
$824.99
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. These pressure or temperature module/sensor combinations are the same as Racepak analog pre-programmed V-Net modules with sensors except that they have NOT been pre-programmed. Racepak analog programmable V-Net modules with sensors must be programmed using the Configuration File in Datalink software (not included).
Not Yet Reviewed
$329.95
$13.35
—
$329.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The module converts the signal so it can be transmitted over the V-Net. Unlike most V-Net modules, these digital pre-programmed modules do not require a sensor. They use the pulse from the component they are monitoring as the signal to the module. Racepak digital pre-programmed V-Net no sensors required modules are programmed for a specific use and are ready for plug-and-play installation on a V-Net cable.
Not Yet Reviewed
$199.95
Manufacturer Rebate
Innovate's TC-4 Plus devices are 4-channel thermocouple amplifiers for the MTS (Modular Tuning System). These data acquisition components may be used as stand-alone amplifiers for logging directly into LogWorks, or they can be used in conjunction with any other MTS-compliant device to retrieve key temperature metrics. Each of the four inputs of the TC-4 can be configured by the user for EGT range (32-1,999 degrees F; 0-1,093 degrees C) or CHT range (32-572 degrees F; 0-300 degrees C) to measure cylinder head temperatures. The TC-4 Plus can also be used to measure other temperature metrics, such as the turbo inlet and outlet, catalytic converter, transmission, and more. Using the TC-4's serial ports, you can daisy-chain other Innovate devices, such as the XD-16, AuxBox (LMA-3), LC-1, DL-32, and SSI-4.
( 1 )
$120.99
—
$460.99
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules without sensors are programmed digital function modules ready for plug-and-play installation on a V-Net cable. You must add the appropriate sensor to the module.
Not Yet Reviewed
$199.95
Racepak V-Net EGT junction boxes provide a smart single-wire connection to your drag racing vehicle network (V-Net). Available as pug-and-play assemblies or individual components pre-programmed for your convenience, these sensors measure the data and the modules that convert the signal from the sensor, so that it can be transmitted. Available as individual or grouped thermocouples for each cylinder or bank of cylinders. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT junction boxes.
Not Yet Reviewed
$619.95
Edelbrock QwikData analog thermocouple extension wiring harnesses are general-purpose 4 ft. cables assembled with plugs. They will extend general-purpose thermocouple harnesses to TK-4 thermocouple converters.
Not Yet Reviewed
$67.95
Tired of probing your vehicle's harness for rpm, TPS, Mass Air Flow, and vehicle speed? Nitrous Express Signal Synchronizers make finding all of these signals easy, converting them into a useable format for nitrous controllers, water methanol controllers, data loggers, or any other electrical device that needs to see a PWM or 0 to 5 V signal. The TPS signal feature is especially beneficial for installing a nitrous controller in newer vehicles that do not have traditional TPS and rpm signals, and wiring a Nitrous Express Signal Synchronizer could not be easier; just plug the unit into your compatible vehicle's OBD2 port and let it go to work for you!
Not Yet Reviewed
$181.90
Manufacturer Rebate
Innovate LM-2 dual digital air/fuel ratio meter basic kits feature the LM-2 that combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Innovate basic kits include the accessories to display your air/fuel ratio, either on the meter and/or on your PC. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * Dual Channel A/F version * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC Innovate dual basic kits include: * LM-2 meter * Bosch wide-band oxygen sensors * 8 ft. sensor cables * Cigarette lighter power adapter * USB cable for PC connection * Weld-in bung and plug kits * Manual
( 1 )
$671.99
The EGT (Exhaust/Gas/Temperature) probes from FAST measure the temperature of exhaust gases to provide real-time data for optimizing engine performance, ensuring fuel efficiency, and preventing engine damage. By monitoring individual cylinders, they help identify engine issues like uneven fuel-air ratios and overheating, which can lead to costly component failures. The probes convert this temperature data into an electrical signal, which is then processed by a monitoring instrument like the FAST XFI module and a dash logger to give operators insights into engine health and performance.
Not Yet Reviewed
$163.95
Clearance
Racepak EFI V-Net Interface module cables are used to convert the serial data stream for an AEM EMS unit into a CAN bus data stream compatible with the RacePak V-Net System. Data from the module is then available for use with the full range of RacePak V-Net devices including on board displays, real time telemetry, and data logging applications.
Not Yet Reviewed
$389.95
$269.50
On Sale
For your data recorder to be able to monitor an analog channel it must receive a signal that it can recognize. The Racepak Module PT2 convert the analog parameters to a standard 0-5 volt signal required by the recorder. The transducer module (combination sensor and signal conditioning modules) provides direct connection to the measured parameter, such as fuel or oil pressure. The signal conditioning module allows the connection of remote sensors, such as thermocouples or position sensors, to the data recorder.
Not Yet Reviewed
$399.95
$219.95
—
$399.95
On Sale
When using a Racepak Pro Analog transducer box, Racepak plug-in, old-style, transducer modules are used to convert the input from various analog functions into signals that can be recognized by the recorder. Where required, a special cable is needed to connect the sensor to the transducer or signal conditioning module. Available modules include: * Pressure transducers, in ratings of 0 to 15/60/100/150/300/500/750/1500 psi * Vacuum transducer, 0-30 in. Hg * Battery voltage, 0-20 V input * Thermocouple amplifier, 0 to 500 degrees F * 0 to 5 V input, outputs 5 V to powered sensor * 0 to 5 V input, outputs 12 V to powered sensor
Not Yet Reviewed
$399.95
$219.95
Racepak serial communications cables are used to transmit or download information from the V300/V300SD/V500 data recorders and your computer. There are a number of options available, such as serial to USB port, so you can find the cable that's right for your application. Load up Racepak, keep your data handy, and start your engines.
( 6 )
$39.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
