Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
92 Results Found For "controller"
Dakota Digital EFI Interface Modules
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 9 )
$109.25
—
$133.00
Dakota Digital EGT/Cylinder Head Temperature Interface Modules
The Dakota Digital BIM-12-2 Exhaust Gas Temp (EGT) and Cylinder Head Temp (CHT) interface module allows for up to two temperature inputs (i.e., 2 EGT or 2 CHT; or 1 EGT and 1 CHT readings). The BIM-12-2 supersedes the BIM-12-1. The BIM-12-2 will supply this information to the VHX, HDX, RTX and VFD3 systems with a black plastic control module. (For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity.)
Not Yet Reviewed
$123.50
Manufacturer Rebate
Dedenbear Throttle Stop Controllers
Dedenbear's two and four-stage throttle stop controllers feature independent timers to give you more complete control over your throttle stops, unlike other controllers that start their timers simultaneously. The timers run independently of each other so you can change the setting of one timer without affecting the others. The controllers also feature exclusive quartz crystal timing for accuracy, and a special ignition-noise filter to eliminate the vibration and interference that come with other models. Compact and simple to install, the throttle stop controllers require just four wires. A single output wire connects to your throttle stop, and a built-in switch allows you to change the sequence of the output.
Not Yet Reviewed
$544.99
On Sale
Holley EFI 8-Channel CAN EGT Controllers
Holley EFI 8-Channel CAN EGT (Exhaust Gas Temperature) controllers are designed exclusively for use with Holley's 8-Channel EGT monitoring kit to measure both exhaust gas and cylinder head temperature. Knowing the exhaust gas temps of each cylinder in your engine may not only help you find potential horsepower that you've left on the table, but also pinpoint weak links your engine may have—allowing you to perform fuel adjustment at the cylinder level. Features include: * 8-Channel CAN EGT module * Plug-and-play for a quick and easy installation * EGT module main harness (4 ft.) * Compatible with Holley HP and Dominator ECU * Requires EGT probes (sold separately) * Requires V5 Build 100 or newer software/firmware
( 1 )
$899.95
$808.95
Racepak Four Channel Air Fuel Controllers
Take control of your exhaust temperatures using one of these Racepak four channel air fuel controllers. They are available for either the left or right side of the engine and feature easy plug-in connections. Sensors sold separately.
Not Yet Reviewed
$1,549.95
HP Tuners CORE Transmission Control Harnesses
CORE ECU is HP Tuners debut standalone engine management solution, delivering superior control over your powerplant with many features that go beyond the constraints of factory ECUs. HP Tuners offers several wiring harness options to mate with their CORE ECU. Their CORE transmission control harnesses are 3 ft. in length and terminated with one or two connectors, along with labeled open leads. Choose the one needed for your build.
Not Yet Reviewed
$159.99
—
$259.99
Mopar Replacement Oxygen Sensor Control Modules
Help your vehicle's engine achieve optimal performance with an assist from genuine OE Mopar Replacement oxygen sensor control modules. They feature high-quality materials and provide the proper fit, form, and function for your vehicle to restore like-new performance and safety. Order the Mopar Replacement oxygen sensor control modules specifically designed for your year/make/model application.
Not Yet Reviewed
$168.99
—
$179.99
AiM Sports LCU-One Lambda Controllers
If your target is peak power, then AiM LCU-One Lambda controllers should be part of your engine-tuning plans. The precise mixture of air and fuel needs to be known for optimum performance. AiM Lambda controllers utilize proven wideband Bosch LSU 4.9 probes and can detect precise values from 0.65 to 1.6 to perfect your engine tuning. By offering configurability of Stoichiometric ratios, the LCU-Ones can be used on most gas, diesel, or alternative fuel engines. The controllers are available in three versions: CAN, analog, and CAN+analog. All of the data you need to hit peak efficiency--and keep it that way--is at your fingertips inside the AiM LCU-One Lambda controllers.
Not Yet Reviewed
$400.00
—
$499.00
Holley Single-Channel EGT Controllers
Holley Single-Channel EGT controllers are designed for use with a K-type thermocouple using a "mini-K" connector. The module's accurate temperature measurement range is 32-2,282 degrees F (0-1250 C), with an accuracy of +/- 5 degrees F. The module is available in two versions: either CAN 1CH EGT, which is a plug-and-play installation for compatibility with Holley EFI products, such as HP and Dominator EFI systems; or Analog module, 1CH EGT with a "flying lead" with three wires exposed for power, ground, and signal for non-Holley EFI installations. Order the EGT controller suited to your application needs. Plug-and-Play, 1CH EGT controller features: * Supplied harness features two CAN connectors (one male, one female) that plug into the Holley main harness (or P/N: 558-412 kit Dominator only) * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts no thermocouple connected or it failed * Note: before mounting, it is recommended you record the CAN ID Serial number from the sticker on bottom side of the unit for use during software setup * Mounting: EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Software setup * Important note: Requires software and firmware Version 5 Build 31 or later Analog module, 1CH EGT controller features: * Wiring: harness is a "flying lead" with three wires exposed for power, ground, and signal (red wire: power 6.5 V-24.0 V; black wire: ground; and tan wire: Analog output) * Outputs a 0-5 V and can be used with systems that have configurable 5 V inputs * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts thermocouple not connected or it failed * EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Analog setup: analog output scaling is accurate between 0.5 and 4.5 V and covers temperature range of a K-type thermocouple
Not Yet Reviewed
$186.95
Dakota Digital OBD-II/CAN Interfaces
Dakota Digital OBD-II/CAN interfaces are designed to plug directly into your engine's diagnostic port, extracting transmission data from the OBD-II computer. They can output speed, rpm, and engine temperature. The interfaces decode the information supplied from the ECM and supply this information to the VFD3 rev. G, VHX and HDX control box instruments. * Module for use with Dakota Digital RTX, HDX, VHX, and VFD3 systems with a black control module.
( 60 )
$133.00
ARC Sensor Integration Modules
ARC model SIM-8 sensor integration modules will greatly simplify wiring sensors into your ECU. With only one cable wired to the ECU, it provides a convenient hub to tie-in up to eight separate sensors. A green LED indicates the presence of +5 V from the ECU. Each sensor is connected to a 4-position terminal block which has provisions for +5 V from the ECU, ECU ground, signal, and shield. These modules are also available with four ECU controlled relays.
Not Yet Reviewed
$124.99
—
$261.99
Biondo Mega 475 Delay Boxes
Biondo Racing Products introduces the Digital Delay Mega 475 Delay Box with built-in Mega Dial controller. Every time you change Your Dial on the Mega 475, your ET is automatically updated on the Dial Display board. No need to enter Your Dial a second time on another unit. Biondo started with the popular Mega 450 and improved on it by adding some new racer-requested features, including the Set and Go push-button mode which is similar to Z-Force. Additional new features include the ability to directly control any V2 Dial Display Board, and the ability to Tap Up and Down on the same pass. The Replay Tach can now record up to nine passes and replay them on the screen. Bracket and Pro Mode both have two 4-Stage timers and can shift up to 5 times by RPM or Time. Features / Specifications: * Face Size: 6 11/16 in. x 5 in. x 1 3/4 in. * Overall Size: 8 11/16 in. x 5 in. x 1 3/4 in. * 12 and 16 volt compatible * 4 - Push-button inputs * 4 - 12 amp outputs -- (Transbrake, SFO, Throttle Stop and Shift) * Built-in controller for V2 Dial Display boards * Crossover Delay Box * CrossTalk Compatible * Controls any V2 Mega Dial Display Board * Day and Night intensity settings for the Dial Board * 5 push-button modes * Set and Go push-button mode (similar to Z-Force) * 1 or 2 hits at the tree with built in 'How Late' feature * Tap Up or Tap Down to .001 seconds * Push-button Interrupt safety feature * Two separate 4-Stage Timers (programmable to thousandths) * Starting Line Enhancer (SLE) * Shift up to 5 times by RPM and/or Time * Built in digital tach with peek RPM and Replay Feature * Selectable Function Output (SFO) -- Line Locks for anti-roll staging -- Starting Line Enhancer -- Second 4 Stage Timer -- Spare Transbrake * Driver Reaction Tester * The large backlit screen displays 4 lines of data at once * Backlit keypad * Glove-friendly * Compatible with 4, 6, and 8 cylinder engines * Compatible with most ignitions
( 1 )
$637.99
—
$659.99
Biondo Elite 625 Delay Boxes
Biondo Elite 625 delay boxes have the ability to directly control any V2 dial display boards. Every time you change your dial on the Elite 625, your dial display board is automatically updated, eliminating the need to enter your dial a second time on another unit. With Biondo's "Set and Go" push-button mode, the press of a button (SET) sets the trans-brake. Then the press of a separate second button (GO) starts the delay timing. Additional options include the ability to Tap Up and Down on the same pass. The setting of the S.L.E. by the trans-brake push-button can also be turned off. The Replay Tach can now record up to nine passes and replay them on the screen. Both Bracket and Pro Mode have three 4-stage timers and can shift up to five times by RPM and/or Time. Biondo Elite 625 delay boxes are available with a red, green, or blue screen. Select the one you prefer. Features: * Crossover delay box * CrossTalk compatible * Day and Night intensity settings for the dial board * Five push-button modes * 1 or 2 hits at the tree with built in "How Late" feature * Tap up or tap down to .001 seconds * Multi-tap feature * Push-button interrupt safety feature * Seven independent outputs * Three separate 4-stage timers (programmable to thousandths) * Dedicated (SLE) Starting Line Enhancer output * Dedicated Line Lock output * Adjustable Burn-out timer * Dedicated high-current shift output * Built in digital tachometer with peek rpm and replay feature * 9-pass memory replay tach * Selectable 4-, 6-, and 8-engine cylinder setting * Compatible with most ignitions * Driver Reaction Tester with LED * Large 4-line LCD (see Dial-ins and Delay at the same time) * Backlit keypad and screen * Glove-friendly * Separate remote mount I/O board to simplify wiring * Full status LEDs on remote I/O board
Not Yet Reviewed
$748.99
—
$783.99
On Sale
AEM Electronics Exhaust Backpressure Install Kits
AEM exhaust backpressure install kits are specifically designed to give accurate backpressure readings, without sacrificing sensor longevity due to extreme operating conditions. Designed for use with their 4-channel wideband UEGO controller, you get precision readings for ultimate performance using AEM exhaust backpressure install kits. Kits include: * Stainless steel 100 psig pressure sensor * Stainless steel standoff tube with fittings * Stainless steel braided hose * Weld-on/threaded bung.
( 1 )
$377.95
$340.15
Biondo Throttle Stops
Biondo CO2-operated throttle stops hook to the throttle linkage and draw only a 1/4 amp. They work with or without a timer, can be used in place of a 2-step box, and won't affect carb or pedal height. A bottle kit is not included.
( 2 )
$259.99
—
$289.99
Manufacturer Rebate
Innovate DB Digital Wideband Air/Fuel Ratio Gauge with LC-2 Kits
Do you ever wonder what your exact air/fuel ratio is? Well, now you can know with Innovate DB digital air/fuel ratio gauge with LC-2 kits. They feature a new, sleek design to match today's modern styles. These kits have a black face, black bezel, and are available with either blue or red LED numbers to fit your needs. Use the included LC-2 wideband controller and Bosch 5-wire oxygen sensor to complete your installation. Also included with the Innovate DB digital air/fuel ratio gauge with LC-2 kits is an oxygen sensor bung and plug, gauge mounting hardware, a CD, and a quick-start information guide.
( 36 )
$229.99
Biondo PCTS Throttle Stop Solenoids
Biondo PCTS throttle stop solenoids are offered individually as spares or replacements. They are 4-port solenoid, and ports are marked 1, 2, 3, 4. The plumbing depends on what item you are controlling. Biondo PCTS throttle stop solenoids have 2-speed control screws. Note: Fittings are not included.
Not Yet Reviewed
$118.99
Shifnoid Linkage Throttle Stops
With Shifnoid linkage throttle stops, all you need do is release the button. Shifnoid linkage throttle stops control your throttle from a designated preset launch rpm to full throttle, all while the gas pedal is on the floor. You can launch with a trans-brake or line lock button and the starting line rpm can be set as low as idle. They work with all ignitions, carburetors, and fuel injection systems.
Not Yet Reviewed
$279.99
—
$349.99
Manufacturer Rebate
Innovate LC-2 Digital Wideband Lambda O2 Controller Kits
Innovate LC-2 Digital Wideband Lambda O2 Controller kits are ideal for applications such as dynamometers, data acquisition systems, stand-alone ECU's, and gauges. They feature self-calibrating circuitry to compensate for changes in temperature, altitude, and sensor condition. These units include a digital input/output, and two full-programmable analog outputs. It can be "daisy-chained" for cost-effective individual cylinder monitoring, and is fully compatible with Innovates' Modular Tuning System (MTS). Additional features include: * Patented DirectDigital™ Wideband Technology * Wideband O² Compatible with all fuel types * Ability to calibrate O² sensor for maximum accuracy * Integrated dual-color status LED (Green/Red) * Two configurable linear 0-5v analog outputs * Positive lock connectors for all connections * Innovate MTS serial in/out * Serial connection to your PC * Real-time display data on screen and/or with powerful LogWorks software
( 11 )
$178.99
Lowdoller Motorsports Push-Lock Boost Control Fitting Kits
Lowdoller Motorsports push-lock boost control fitting kits provide a secure, quick, and simple way to plumb various boost and vacuum components in turbocharged and supercharged vehicles, such as wastegates, boost controllers, and blow-off valves. The "push-lock" design allows for tool-free installation by simply pushing the tubing into the fitting, which then grips the line. These types of fittings offer a significant advantage over traditional methods like rubber hoses and clamps, making the entire setup easier to connect and disconnect for maintenance or adjustments. Order the fitting kit designed for your application to plumb your vacuum/boost lines like a pro!
Not Yet Reviewed
$149.99
Haltech iC-7 Color Display Dash
Haltech offers a variety of data acquisition components, including the iC-7 Color Display Dash. With a crisp, clear and full color display, this unit lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading perks in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current Haltech ECUs via a CAN network. * Ideal replacement for individual analog gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via Haltech iC-7 software and USB cable * Suits: All current Haltech ECUs via CAN. Also Plug-and-Play compatible with the following aftermarket ECU brands: Link, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series (M400,600,800 gold box ECUs), Syvecs. * Includes: Haltech iC-7 Display Dash, 34 Pin main connector harness (including spare pins for input wiring), DTM-4 to DTM-4 CAN extension cable, USB to M5 right angle cable, USB Cable, Mounting Screws, USB flash drive with iC-7 Software, Quick Start Guide, Haltech stickers and a fabric keyring tag * Notes: OBD-II and Stand-alone versions also available.
Not Yet Reviewed
$1,099.00
Manufacturer Rebate
Dedenbear Throttle Stop Controller Second Stage Kits
Dedenbear throttle stop controller second stage kits have been specifically designed for high-horsepower drag race cars that have significant tire spin problems right off of the starting line. They allow adjustable intermediate opening positions to help eliminate your traction problem. The kits include a second control valve, an air line kit with a T-fitting, and a solenoid to active the CO2 air.
Not Yet Reviewed
$335.99
Altronics O2WBC Wideband Oxygen Sensor Controllers
Altronics O2WBC wideband oxygen sensor controllers are designed to accurately measure the air/fuel ratio of your engine. They easily integrate with data acquisition, Dyno, and engine management systems. The O2WBC provides a calibrated linear 0 to 5 V output and 0 to1 V output to simulate a factory narrow band signal. They are compatible with aftermarket data acquisition and engine management systems Other key features include: * Accurate to 0.1 AFR * Wideband oxygen sensor * Extruded aluminum enclosure * 0 to 5 V linear output * 0 to 1 V factory output * Optional air/fuel gauge * Optional serial data output
Not Yet Reviewed
$399.99
On Sale
Racepak IQ3 Dash Displays
Monitor your rides critical systems and performance with Racepaks IQ3 dash displays. IQ3 displays are completely customizable, allowing you to monitor the information you want in real time while placing info on multiple pages allows you to organize the information and avoid clutter. Racepak helps avoid the clutter associated with wiring as well by utilizing their V-Net cable system. The unique pass though wiring allows you to hook multiple sensors together in series leaving only one wire that needs run to the display or data logger. The display is powerful enough to be used as a standalone, real time gauge system or with any V-Net compatible data logger. The user can even define alarms to alert them to a problem and shift lights to maximize your performance. Take control of your racecar, hardcore offroader or street car with Racepaks IQ3 dash displays.
( 6 )
$767.95
$690.95
