Availability
Showing In Stock Items. Show All 9 Items.
Whether you're looking for a cylinder head temperature, intake manifold temperature, exhaust gas temperature (EGT), or fluid temperature sensor, Racepak thermocouple sensors have you covered. Racepak also offers adhesive thermocouples that eliminate the need for bung and other sensor mounting methods, making them ideal for a number of surface temperature readings such as shock housing, engine block, fuel tank, fuel pump, electric motor, and battery temperature. These Type-K thermocouple assemblies (Nickel-Chromium/Nickel-Aluminum) are precisely designed for their specific applications and must be used with the appropriate thermocouple amplifier module (sold separately). All probes are terminated with a male 2-pin mini-connector.
Not Yet Reviewed
$158.95
—
$799.95
Racepak LDX Logger dash data recorders combine data acquisition with Racepak's advanced instrumentation! They also take full advantage of the capabilities of V-Net technology. In addition to the wiring harness that imports signals from the engine rpm, drive-shaft rpm, water temperature, oil pressure, and battery voltage, up to 32 optional sensors modules can be attached to the single V-Net network cable. This yields a total recording capability of 37 channels of data. The LDX Logger can record and upload to a PC the data from all of the monitored sensors, while at the same time displaying the input from up to 21 of those functions on the dash screen. With the simple push of a button, you can view the displayed functions by scrolling through four separate screen pages on the dash. Each page contains five user-programmable digital displays, plus the constant engine rpm bar graph. Selecting which functions will appear on each page is done through your Racepak Datalink software. The dash features output ports to connect a shift light and an external warning light. Shift points can be programmed using the screen of the dash or your software. You're also able to assign limits for the warning lights and the parameters for the dash-mounted mode buttons. Minimum and maximum levels that were attained during a recording can also be displayed. One full megabyte of memory provides a generous amount of recording time, while sample rates are programmable up to 100 per second per channel. Uploading data to a PC or laptop is accomplished through an included 6 ft. serial cable. The screen is backlit for nighttime use. Four threaded studs on the rear of the LDX Dash Logger facilitate mounting it to any flat surface.
Not Yet Reviewed
$1,549.95
HalTech's new multi-function CAN gauge displays real-time data from your HalTech ECU. Easily customize your gaugeART CAN Gauge to display the data you want to see with the included gaugeART CAN Gauge App (requires Android 4.4 or later or Apple iOS 9.1 or later). The easy-to-use app on your smartphone or tablet uses a wireless connection to the gauge for easy setup and customization. * Set up via gauge-mounted buttons or a mobile app * High-contrast, dimmable OLED display * 1, 2, or 4 gauge layouts on up to 10 different pages * Custom warning points with special warning screens SUPPORTED PARAMETERS: Boost Pressure Air/Fuel Ratio Coolant Temperature Fuel Pressure Ethanol content Air Temperature Battery Voltage Coolant Pressure EGT Fuel Level Fuel Trim Gear Position Injector Duty Nitrous Pressure Oil Pressure RPM Transmission Line Pressure Throttle Position Transmission Oil Temperature Turbo RPM Wheel Speed Wheel Slip * Above can be displayed without additional sensors. COMPATIBLE WITH: Haltech Platinum Sprint Series Haltech Platinum Sport Series Haltech Pro Plugin Series Haltech Elite Series Haltech Nexus Series
Not Yet Reviewed
$430.00
Wagner Tuning offers MFD32 data acquisition displays for a wide range of vehicles, including cars and trucks from Audi, Volkswagen, Ford, and Toyota. Now you can always have all relevant values in view. With these advanced cutting-edge displays, you gain access to all the data from your engine control unit. Each Wagner display queries the sensors directly via the Can Bus protocol and presents the information on the reliable MFD28 display. Wagner has fine-tuned the manufacturer-specific Can Bus protocols to achieve maximum query speed. MFD32 displays seamlessly integrate into your vehicle's interior. Key features: * Perfect integration into your vehicle's interior * Query up to 128 sensors * 10 individually customizable views with our DSS - Display Setup Software * Pre-configured views for a quick start with our display * Easy Plug-and-Play installation with our cable set – simply plug it in and you're ready to go * 4 additional analog inputs for monitoring exhaust temperature, oil pressure, and more * Direct ethanol sensor integration * Best readability with an optional anti-glare film * Sensor querying on par with manufacturer diagnostic tools Additional Features: * Performance meter: Measure your acceleration times with the Performance Widget: 0-100, 100-200, 0-200 * Data logging: Log all data on the internal SD card—whether it's "on-demand" (start with a fingertip) or permanent. All data from your last drive is stored * Preset alarms: Activate and customize pre-set warning messages, such as receiving a significant warning when the exhaust temperature exceeds 900 degrees F * 4 Analog additional inputs: Connect additional temperature and/or pressure sensors for further monitoring possibilities, including exhaust temperature or exhaust backpressure. An ethanol sensor can be connected to one of the digital inputs * Error reading/deletion: Read engine control unit errors in plain text and delete them * Customization: Customize the startup screen or choose from various widgets to tailor the display to your preferences * Seamless vehicle integration: Left-hand and right-hand drive displays are available --- Access to all engine control unit (ECU) data: Wagner Tuning provides your display with a pre-configured TRI file as standard. This file defines all the sensors that can be queried, including: * Temperatures: Engine coolant temperature, intake air temperature, exhaust temperature, transmission temperature * Pressures: Boost pressure, ambient pressure, oil pressure * Lambda/Mixture: Lambda target/actual, short-term lambda adaptation, long-term lambda adaptation, MAF, engine load, torque * Driver dynamics: Brake pressure, vehicle speed, throttle angle/gas pedal position * Other: RPM, total ignition angle, gear, battery voltage, ignition angle correction per cylinder * Analog inputs: Additional sensors like oil temperature, fuel pressure, oil pressure, exhaust temperature, and more can be added, including an ethanol sensor for Flex Fuel vehicles * Please note that not every engine provides all these values
Not Yet Reviewed
$499.00
For years, data loggers have been expensive and complicated for the weekend racer. Good news, Computech has changed that with the cutting-edge technology of DataMaxx bracket kit data loggers, along with user-friendly software, and 24/7 weekend tech support. Datamaxx supplies the essential information need, plus a beautiful dash. You don't pay for anything you're not going to use with this kit; and you have the option to upgrade any time. Computech DataMaxx bracket kit data logger features: * DataMaxx main module * Billet aluminum enclosure * 100 samples per second per channel * Multiple CAN bus connections * Multiple rpm channels, magneto-compatible * Switch input channels * Warning light outputs * Multiple analog channels * Battery voltage channel * Sensors: engine rpm, driveshaft rpm, fuel psi, oil psi, water temp, and single EGT probe Computech DataMaxx LCD dash function features: * 10 channels per screen * Unlimited screen configurations * Customizable shift and warning lights * SD memory card port * Variable speed playback (1/10x, 1/4x, 1/2x, 1x, 2x, 4x, 10x, 100x) * Single cable connection * Day/night brightness modes * Eliminates need for conventional gauges
( 1 )
$2,349.95
Wagner Tuning offers MFD28 data acquisition displays for a wide range of vehicles, including cars and trucks from Audi, Volkswagen, Ford, BMW, Dodge, and Ram. Now you can always have all relevant values in view. With these advanced cutting-edge displays, you gain access to all the data from your engine control unit. Each Wagner display queries the sensors directly via the Can Bus protocol and presents the information on the reliable MFD28. Wagner has fine-tuned the manufacturer-specific Can Bus protocols to achieve maximum query speed. These displays seamlessly integrate into your vehicle's interior. Key features: * Perfect integration into your vehicle's interior * Query up to 128 sensors * 10 individually customizable views with Wagner Tuning's DSS (Display Setup Software) * Pre-configured views for a quick start with our display * Easy plug-and-play installation with Wagner's cable set; simply plug it in and you're ready to go * 4 additional analog inputs for monitoring exhaust temperature, oil pressure, and more * Direct ethanol sensor integration * Best readability with an optional anti-glare film * Sensor querying on par with manufacturer diagnostic tools Additional Features: * Performance meter: Measure your acceleration times with the Performance Widget: 0-100, 100-200, 0-200 * Data logging: Log all data on the internal SD card—whether it's "on-demand" (start with a fingertip) or permanent. All data from your last drive is stored * Preset alarms: Activate and customize pre-set warning messages, such as receiving a significant warning when the exhaust temperature exceeds 900 degrees F. * 4 Analog additional inputs: Connect additional temperature and/or pressure sensors for further monitoring possibilities, including exhaust temperature or exhaust backpressure. An ethanol sensor can be connected to one of the digital inputs * Error reading/deletion: Read engine control unit errors in plain text and delete them * Customization: Customize the startup screen or choose from various widgets to tailor the display to your preferences * Seamless vehicle integration: Versions for left- or right-hand drive are available --- Access to all engine control unit (ECU) data: Wagner provides your display with a pre-configured TRI file as standard. This file defines all the sensors that can be queried, including: * Temperatures: Engine coolant temperature, intake air temperature, exhaust temperature, transmission temperature * Pressures: Boost pressure, ambient pressure, oil pressure * Lambda/Mixture: Lambda target/actual, short-term lambda adaptation, long-term lambda adaptation, MAF, engine load, torque * Driver dynamics: Brake pressure, vehicle speed, throttle angle/gas pedal position * Other: RPM, total ignition angle, gear, battery voltage, ignition angle correction per cylinder * Analog inputs: Additional sensors like oil temperature, fuel pressure, oil pressure, exhaust temperature, and more can be added, including an ethanol sensor for Flex Fuel vehicles * Please note that not every engine provides all these values
Not Yet Reviewed
$499.00
AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.
( 2 )
$1,649.95
—
$2,099.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
