Selected Filters


Availability


32 Results Found For "Single"

Part Groups

Results 1 - 24 of 32

On Sale

Racepak AF1 Single Channel Air Fuel Sensor Packages

Racepak's AF1 single channel air fuel sensor packages are designed to be utilized with any of their V-net (canbus) Series of data loggers. They are suitable for use with gasoline or alcohol, with calibration values available for either fuel types. The power supply requirement of 12 to 16 V enables use with standard 12 or 16 V high performance batteries. Racepak AF1 single channel air fuel sensor packages include: * Heat- and water-resistant controller with integrated V-net module * Bosch LSU air/fuel sensor * Wiring harness * Installation instructions * Programmable 0 to 5 V analog output

Not Yet Reviewed

$531.99


$477.95

On Sale

Holley EFI Single-Channel EGT Kits

Introducing the Holley EFI Single-Channel EGT kits! They keep you in-the-know about what's going on with your engine. Exhaust gas temperature data is critical information when your engine tune-up seems to be on the ragged edge. Knowing the exhaust temp can help you identify potential horsepower left on the table, or pinpoint any weak links in your max effort race engine. Holley offers these EFI Single-Channel EGT kits for non-Holley applications, as well as compatibility with HP Tuners, Dominator EFI, and Terminator X. Order the Holley EFI Single-Channel EGT kit to meet your application needs. Kit features, specs, and parts may include: * Single-Channel CANbus EGT controller module for quick and easy installation with Holley EFI—or Single-Channel Analog EGT controller with unterminated output wires for universal installations (please specify when placing order) * High-quality 1/4 in. stainless steel EGT weld bung * Robust 1/4 in. probe designed to withstand extreme cylinder pressures * Sensor (included) is designed to work with any engine combination, with an open reinforced tip for the fastest response rate and improved shielding

Not Yet Reviewed

$331.99


$297.95

On Sale

Holley Single-Channel EGT Controllers

Holley Single-Channel EGT controllers are designed for use with a K-type thermocouple using a "mini-K" connector. The module's accurate temperature measurement range is 32-2,282 degrees F (0-1250 C), with an accuracy of +/- 5 degrees F. The module is available in two versions: either CAN 1CH EGT, which is a plug-and-play installation for compatibility with Holley EFI products, such as HP and Dominator EFI systems; or Analog module, 1CH EGT with a "flying lead" with three wires exposed for power, ground, and signal for non-Holley EFI installations. Order the EGT controller suited to your application needs. Plug-and-Play, 1CH EGT controller features: * Supplied harness features two CAN connectors (one male, one female) that plug into the Holley main harness (or P/N: 558-412 kit Dominator only) * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts no thermocouple connected or it failed * Note: before mounting, it is recommended you record the CAN ID Serial number from the sticker on bottom side of the unit for use during software setup * Mounting: EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Software setup * Important note: Requires software and firmware Version 5 Build 31 or later Analog module, 1CH EGT controller features: * Wiring: harness is a "flying lead" with three wires exposed for power, ground, and signal (red wire: power 6.5 V-24.0 V; black wire: ground; and tan wire: Analog output) * Outputs a 0-5 V and can be used with systems that have configurable 5 V inputs * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts thermocouple not connected or it failed * EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Analog setup: analog output scaling is accurate between 0.5 and 4.5 V and covers temperature range of a K-type thermocouple

Not Yet Reviewed

$186.99


$114.95

Biondo Throttle Stops

Biondo CO2-operated throttle stops hook to the throttle linkage and draw only a 1/4 amp. They work with or without a timer, can be used in place of a 2-step box, and won't affect carb or pedal height. A bottle kit is not included.

5.0 out of 5 stars ( 3 )

$169.99

—

$251.99

Manufacturer Rebate

Innovate LM-2 Digital Air/Fuel Ratio Meters

Innovate's LM-2 digital air/fuel ratio meters combine an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The meters' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s' self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2s also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. With the provided LM Programmer software, these analog outputs may also be configured by the user. Innovate's LM-2s are available in single wideband and dual wideband O2 configurations. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool, read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card (included) * Playback log data on screen with powerful LogWorks software (included) * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC

4.09 out of 5 stars ( 11 )

$553.99

—

$712.99

On Sale

Racepak Analog Pre-Programmed V-Net Modules With Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.

4.5 out of 5 stars ( 14 )

$249.99

—

$399.99


$223.95

—

$358.95

Computech EGT Plus Monitor Kits

Have you ever had a tune-up on your engine that was just perfect? Or, did you spend the time and money to dyno your engine? Wouldn't it be nice to go to the track and get back to that same tune-up every single time? With the Computech EGT Plus (exhaust gas temperature) monitor kits you can make sure that your vehicle is tuned correctly, week in and week out. Choose the EGT Plus monitor kit that suits your needs and get ready to tune your fuel system with confidence to maintain the performance edge and consistency you need to be a winner! Additional features of the EGT Plus monitor kits include: * Available with single or dual probes * Available in weld-in or clamp-on styles * Unit monitors dual temperature channels * Power source through 9 V battery or 12 V vehicle supply * Continuous mode--simple maximums * Record switch mode -- Choose when to record -- Maximum temperature and rpm * Trans-brake mode -- Launch temperature and rpm -- Finish line temperature and rpm -- Maximum temperature and rpm -- Time maximums occurred -- Notable time, temperature, and rpm

Not Yet Reviewed

$479.95

—

$599.99

Altronics O2 Alert Warning and Recording Systems

Altronics O2 Alert warning and recording systems are specifically designed to record air/fuel ratios with a warning output. Not only do they record up to two wideband oxygen sensors, they also record engine rpm and have a programmable warning output to protect against detonation. The systems feature a backlit display, one wideband O2 sensor, a warning output, and software. The warning output can be used to activate a warning light, enable fuel enrichment, shut down nitrous, or retard timing. Recording can be started by a preset rpm value or switch, and can be played back on the systems or downloaded and graphed to a PC.

1.0 out of 5 stars ( 1 )

$599.99

Manufacturer Rebate

Innovate LM-2 Ultimate Shop Kits

Innovate LM-2 Ultimate shop kits set you up to dial in maximum horsepower. The Ultimate shop kits are available in single or dual channel versions and include 18 ft. sensor cable, exhaust clamp, inductive clamp, and bung/plug. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC

5.0 out of 5 stars ( 1 )

$631.99

—

$829.99

On Sale

Racepak SmartWire To Switch Panel Cables

Racepak Smartwire to Switch Panel Cables are the quickest and easiest way to connect a switch panel, switch module, or keypad to the Racepak Smartwire unit. Ranging from 6 in. to 10 ft., these cables are the perfect choice for almost any application from drag racing to off-road and even pulling! Connect your remote module with Racepak Smartwire to switch panels today!

Not Yet Reviewed

$95.99

—

$115.99


$86.30

—

$104.35

FuelTech EGT Conditioners

FuelTech EGT conditioners can be used to read EGTs, CHTs, oil, air, water, or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up input channels to be used for other purposes. For more precise and accurate exhaust gas temperature monitoring, order FuelTech EGT conditioners. Key features: * Thermocouple conditioner K-Type * Single-channel * 0-5 V analog output * 12 V * For use with FuelTech's WB-O2 Datalogger or PRO24 Datalogger (sold separately) * EGT thermocouple not included

Not Yet Reviewed

$109.99

Biondo SLP Cylinders

Biondo SLP cylinders are conveniently offered separately as spares for your SLP version starting line control/throttle stop. They have a diameter of 7/8 in. with 1/8 in. ports and a length--with no accessories and unextended--of 5 1/2 in. Add 2 1/2 in. when fully extended. Biondo SLP cylinders will provide the exact fit and function or the originals they are replacing.

Not Yet Reviewed

$84.99

AiM Sports Combined Temperature and Pressure Sensors

The primary purpose of AiM Sports combined temperature and pressure sensors is to provide simultaneous, high-precision monitoring of both fluid pressure and temperature through a single port. They enhance data acquisition, simplify wiring, and save weight/space by combining two sensors into one unit. These sensors are a critical tool for optimizing vehicle performance, monitoring engine health, and enhancing safety. Key functions and advantages include: * These sensors are specifically designed for automotive motorsports and data acquisition systems like the AiM MXS, MXG, and MXP dashes * Space and weight efficiency—ideal for racing environments where space is limited; reduces plumbing complexity and weight by replacing two separate sensors with one unit * Dual data logging—records pressure and temperature in real-time, feeding data directly into AiM data loggers or dashboards for analysis * Allows teams to monitor critical parameters like engine oil and fuel pressure/temperature simultaneously to help prevent hardware damage * High reliability—engineered specifically for the extreme conditions, vibrations, and heat cycles found in professional motorsports * Compatibility—features a 1/8-inch NPT thread and connects to AiM systems via a 4-pin 719 connector

Not Yet Reviewed

$239.99

On Sale

Racepak Analog Pre-Programmed V-Net Modules Without Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.

Not Yet Reviewed

$199.99

—

$238.99


$179.95

—

$214.95

On Sale

Racepak Analog Programmable V-Net Modules With Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. These pressure or temperature module/sensor combinations are the same as Racepak analog pre-programmed V-Net modules with sensors except that they have NOT been pre-programmed. Racepak analog programmable V-Net modules with sensors must be programmed using the Configuration File in Datalink software (not included).

Not Yet Reviewed

$14.99

—

$349.99


$12.81

—

$313.95

On Sale

Racepak SmartWire Kits

Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.

1.0 out of 5 stars ( 1 )

$1,849.99

—

$2,699.99


$1,663.95

—

$2,428.95

On Sale

Racepak Digital Pre-Programmed V-Net No Sensors Required Modules

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The module converts the signal so it can be transmitted over the V-Net. Unlike most V-Net modules, these digital pre-programmed modules do not require a sensor. They use the pulse from the component they are monitoring as the signal to the module. Racepak digital pre-programmed V-Net no sensors required modules are programmed for a specific use and are ready for plug-and-play installation on a V-Net cable.

Not Yet Reviewed

$207.99


$186.95

On Sale

Racepak SmartWire Switch Panels

Racepak SmartWire switch panels are made from aluminum and then black anodized for a professional appearance. They're linked together via a single cable to the switch panel's connector located on top of the SmartWire housing.

Not Yet Reviewed

$399.99


$358.95

On Sale

Racepak V-Net Event Marker Modules

Racepak V-Net event marker modules are specialized data acquisition devices used to record the exact moment specific electrical events occur in a vehicle. They're primarily used in motorsports to track actions like the release of a powered button, brake activation, or line-lock engagement. How They Work: * Event Tracking: The module detects a 12 V signal change (such as pressing or releasing a switch) and records this time-stamped event in your data logger * V-Net Technology: Racepak's V-Net is a smart-data system that allows multiple sensors and modules to transmit signals through a single, continuous cable. The event marker module acts like a mini-computer that tags this electrical trigger so it corresponds exactly with your other vehicle metrics * Data Correlation: By overlaying these marked events in data analysis software, racers can directly see how driver inputs (i.e., hitting a transbrake or nitrous button) affect engine performance, acceleration, and G-forces Key features and requirements: * Standard Event vs. Switch Contact: The standard 12 V module monitors the release or activation of power. * Ease of Use: Because it runs on the V-Net chain, you can simply plug the module into any existing junction in your main V-Net cable without needing to route an entirely new wire to the data recorder * Software Integration: Once plugged in, your Racepak DataLink software automatically reads and configures the new channel to display the exact time the event happened

Not Yet Reviewed

$199.99


$179.95

On Sale

Racepak V-Net EGT Sensor Kits

Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)

Not Yet Reviewed

$1,049.95

—

$1,699.99


$599.50

—

$1,528.95

On Sale

Racepak Digital Pre-Programmed V-Net Modules With Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.

Not Yet Reviewed

$371.99

—

$415.99


$333.95

—

$373.95

On Sale

Racepak Digital Pre-Programmed V-Net Modules Without Sensors

Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules without sensors are programmed digital function modules ready for plug-and-play installation on a V-Net cable. You must add the appropriate sensor to the module.

Not Yet Reviewed

$212.99


$190.95

AiM Sports XLog Data Loggers

The AIM Sports XLog data loggers are a compact, screenless data acquisition system designed for motorsports where space is limited, such as in motorcycles, single-seaters, or tight car cockpits. These small devices provide the logging power and expandability of larger AiM systems like the Solo 2 DL but in a significantly smaller rugged package. Key features and benefits: * Compact and lightweight—the device is specifically designed to fit in tight spaces (e.g., inside fairings) while delivering full-scale data gathering capabilities similar to larger units, such as the Solo 2 DL * Rugged construction—waterproof and durable design ensures consistent performance in harsh, open-cockpit racing environments * High performance and capacity—data logger device offers a 4 GB internal memory with the option of a removable 16GB USB-C memory stick for long-duration logging * Comprehensive Vehicle Dynamics—device includes a 6-axis 100Hz Inertial Measurement Unit (IMU) to measure 3D acceleration and angular velocity (pitch, roll, and yaw), helping analyze braking, cornering, and chassis behavior * Seamless Data Analysis—data is easily managed via Wi-Fi or USB-C in Race Studio 3 software, allowing for deep analysis of driver performance, lap times, and vehicle data * ECU Connection—interfaces with thousands of pre-defined vehicle ECUs via CAN, RS232, or K-Line, as well as providing an RPM input * Custom protocols—users can develop their own protocols using the CAN Builder feature in RaceStudio 3 * Extensive expandability—device features a CAN expansion port to connect modules like the ACC3 (analog sensors), Lambda controllers, and Data Hubs

Not Yet Reviewed

$699.99

On Sale

Racepak Smartwire Switch Modules

Racepak switch modules provide the ability to use existing switches in conjunction with a SmartWire module. Switches are connected to the spade connectors of the module, and switch data is routed to the SmartWire via a single cable. These modules allow your input for 16 remote switches. Adding a second switch module is quick and easy, through the use of a short jumper cable between the two modules. Racepak SmartWire switch modules are machined from billet aluminum and anodized black.

Not Yet Reviewed

$399.99


$358.95